January 5th, 2010, 10:10 PM | #1 |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
Noob question - regarding jetting
Can I re-jet to the default Dynojet settings (3 turns, 98 DJ jet) on my stock exhaust? I plan on adding an Area P exhaust later but would like to ride it with the stock exhaust for now.
(Apologies to the mods as I asked this within one of the other threads but decided to post it on its own thread for visibility...) |
|
January 6th, 2010, 11:50 AM | #2 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
You can do what ever ya want with the jetting. Stock bike, just putting in the DJ needles works great. I wouldnt up the jet until the pipe is on thou.
|
|
January 6th, 2010, 12:13 PM | #3 |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
Thank you. But why is it that you don't think I should change the main jet with the stock exhaust? Will I damage something?
|
|
January 6th, 2010, 01:29 PM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
If you select the wrong main jet, you can. The question is, why do you think you need to touch the main jet?
rejetting is not a cure all for instant/go fast HP, but rather a means to fix problems that you are having with engine power delivery characteristics. bigger is not always better. |
|
January 6th, 2010, 02:08 PM | #5 | |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
Quote:
|
|
|
January 6th, 2010, 02:24 PM | #6 | |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Quote:
Just think of it as getting into the top of the carbs once, and then once again for the bottom when the pipe comes in. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stupid noob question from a non-noob | LNasty | 2008 - 2012 Ninja 250R Tech Talk | 13 | March 21st, 2015 10:47 PM |
jetting question | mikedabike64 | 2008 - 2012 Ninja 250R Tech Talk | 4 | November 19th, 2013 02:01 PM |
Jetting Question | NathanUc | 2008 - 2012 Ninja 250R Tech Talk | 3 | August 5th, 2011 02:14 PM |
jetting question | lotus168 | 2008 - 2012 Ninja 250R Tech Talk | 12 | April 10th, 2011 02:26 AM |
Noob Jetting Question | 00v_Lucky | 2008 - 2012 Ninja 250R Tech Talk | 6 | July 11th, 2010 06:23 PM |
|
|