August 31st, 2014, 05:48 PM | #1 |
ninjette.org member
Name: Chris
Location: NB, Canada
Join Date: Aug 2014 Motorcycle(s): 2013 Ninja 300 ABS Posts: 10
|
TST Industries Integrated Tail Light, Fender Eliminator & LED Turn Signals
So I installed my TST Industries Integrated Tail Light, Fender Eliminator, and LED Turn Indicators.
The whole install went well, although I broke one clip on one of the body pieces right below the Driver's seat. Those damned friction fasteners.. The only thing that gave me a hard time is putting the Passenger's seat back in afterwards. It's like the pegs at the rear wouldn't go as far in as before, on top of the light, so I couldn't get the front locking part in place without using a lot of force. I know fitment can't always be 100% spot-on with aftermarket parts, but is there something I might have done wrong, or something I can do to fix it? Had a time getting the light into place, too. In any case, I intend to get the Rear Cowl in the near future. All of the fasteners, screws and rivets were perfectly lined up. Other question, about the Driver's seat. Do I need to be extra careful putting it back into place, to ensure the bike's electronics are protected from water? The two bolts lined up perfectly, and I made sure the two pegs on the back went into their slots. Should be all there is to it, right? Pictures will come tomorrow if the weather is nice! Edit: I took an Xacto knife to those little plastic pegs, and it fits perfectly now. There was just a bit of excess plastic somewhere and it didn't let them fit in quite right. Last futzed with by NurseWest; September 1st, 2014 at 12:01 PM. |
|
September 1st, 2014, 03:31 PM | #2 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Looks good man
|
|
September 1st, 2014, 04:01 PM | #3 |
ninjette.org member
Name: Chris
Location: NB, Canada
Join Date: Aug 2014 Motorcycle(s): 2013 Ninja 300 ABS Posts: 10
|
Thanks! Couple other things to come.. It seems every time I check one thing off of my wish list, I find three more I want. Expensive hobby, lol.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TST Industries Integrated Tail Light & Fender Eliminator & License Plate Light Review | SON1C | 2013 - 2017 Ninja 300 Farkles | 3 | May 12th, 2014 06:25 PM |
FS: Fender Eliminator 250r 2008+ w/ LED signals & LED plate light CUT 35$ shipped | jonthechron | Motorcycle-related | 9 | November 5th, 2010 07:43 AM |
|
|