Ninja 250 FE Wiring (LP Light)

[zan]

I've never been a DIY person, so a bad mistake on my half purchasing a cheap fender eliminator kit that lacks instructions. This wiring business is all new to me - so be nice.

After a tedious time dismantling the fender, I was was left wondering how to connect up the new license plate light and rear indicators. Unfortunately none of the wires came with connectors - so any ideas how to connect up the new license plate light (don't worry about the indicators for now)?

Here's the new fender and the wires (LP wire is the long black one):

http://i50.tinypic.com/dpa2gy.jpg

Where it needs to connect to (female):

http://i45.tinypic.com/2zsbtas.jpg

OEM license plate wire (male):

http://i45.tinypic.com/fyn7nm.jpg

I've tried just plugging them directly into the female connector (2nd pic) and the lights work - but obviously it won't hold.

Bit confused on what exactly I need to do (cut one of the wires + solder? buy new connector? from where?)

Any help greatly appreciated

[loz944]

I personally would fit the wires on you FE kit with oem style connectors.

There is a thread on here of where to get them.

your second option is to cut the original connectors off and resolder

edit here is the link

Eastern Beaver

[zan]

Originally Posted by loz944

I personally would fit the wires on you FE kit with oem style connectors.

There is a thread on here of where to get them.

your second option is to cut the original connectors off and resolder

edit here is the link

http://www.easternbeaver.com/Main/El...onnectors.html

Thanks for the reply (your link is broken but I found the site on google).

I really wanted to avoid spending more money, but since I don't own a soldering iron looks like my only option is to buy some OEM connectors (min. shipping from that guy is $20).