ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old September 6th, 2010, 04:44 PM   #1
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
08' Ninja 250 Parts bike part out *you name the part and price*

Parting out one of my 08 Ninja 250's. Bike ran just fine before being parted out. Below is a picture of how it is now. Willing to sell everything. Have plenty of extras in the garage that are not listed. Either reply or PM me if you want something. Got a decent deal on the parts bike so I am willing to pass that deal on, just make me a decent offer on whatever it is you want/need. Will be selling the harness as one complete item with the ECU separate. The clip-ons are bent, but able to be straightened out. If you want any particular pictures just let me know. Also, no fairings for sale because they all were the super cheap eBay knockoffs and I wouldn't feel comfortable selling them to anyone.

Recently available again:
Front and rear rims
Upper fairing stay
Brakes, Brakes, and more brakes!!!

Headlight & Gauges are available Make me an offer!!!




Also have:
Both seats
2 dented tanks
Front & rear brakes
EX 500? rim
stock gauges 5,2xx miles
Complete stock exhaust x 2
ENGINE
FRAME
Swing Arm

***All Parts Are Stock***


How it sits now


Before I stripped her down

Last futzed with by BuckyNaked; October 7th, 2010 at 07:42 PM.
BuckyNaked is offline   Reply With Quote




Old September 6th, 2010, 06:57 PM   #2
dyeforever
ninjette.org member
 
dyeforever's Avatar
 
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010

Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold)

Posts: 110
im looking for the upper cowling stay. happened to have it?
dyeforever is offline   Reply With Quote


Old September 6th, 2010, 07:38 PM   #3
KTRacing38
2010 250 Cup Champion
 
KTRacing38's Avatar
 
Name: Kristy
Location: Port Perry, Ontario, Canada
Join Date: Jan 2010

Motorcycle(s): 2008 Ninja 250R and 2007 Honda CR150F

Posts: 168
Pm sent - re: bar ends, tail light cover
KTRacing38 is offline   Reply With Quote


Old September 6th, 2010, 07:58 PM   #4
sixer
no joy
 
sixer's Avatar
 
Name: Six
Location: Cali
Join Date: Nov 2009

Motorcycle(s): Ninja 2006 636

Posts: 408
ill buy the gauges - really need the gauge top cover but whut the heck my bikes goin to wifey ... don't know what its worth tho so shoot me a pm wit yer price...

also im looking for front fender and rear brake caliper.

oh yeah hurry cause i got the moneie$$
sixer is offline   Reply With Quote


Old September 6th, 2010, 08:21 PM   #5
ztrack157
The Sportisi Master
 
ztrack157's Avatar
 
Name: Matt
Location: Chico
Join Date: May 2009

Motorcycle(s): 2008 Ninja 250

Posts: A lot.
Front rim $100 shipped?
__________________________________________________
Sportisimoto USA is born.
ztrack157 is offline   Reply With Quote


Old September 6th, 2010, 10:29 PM   #6
Cali619
Giggity Giggity
 
Cali619's Avatar
 
Name: Ryam
Location: San Diego
Join Date: Feb 2009

Motorcycle(s): 08 ninja 250R aka Hiryu

Posts: 481
Got a gear shift lever?
__________________________________________________
Facebook DY Fender chop, Danmoto CB slip-on w/baffle, Airbox removed, Kleen-air removed, shimmed needles, Mikuni #117.5 Main jets, K&N RU-1822 air filter pods
Cali619 is offline   Reply With Quote


Old September 6th, 2010, 11:46 PM   #7
bamaland
ninjette.org member
 
bamaland's Avatar
 
Name: chris
Location: picayune,ms
Join Date: Sep 2010

Motorcycle(s): 93 kawi gpz500

Posts: 242
i know you said you wouldnt sell the fairings.. but im looking to try a project out and need experimental plastics.. if you would sell em, how much and is headlight available also?
bamaland is offline   Reply With Quote


Old September 7th, 2010, 03:42 AM   #8
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Dye - Upper cowling stay is the metal bracket right? If so, I've got it available.

Sixer - PM sent

ztrack - Wanna just do an even swap for the GB hugger?

Cali - Gear shift lever spoken for already

Bama - I'll shoot you a pm tonight with pics of the fairings
BuckyNaked is offline   Reply With Quote


Old September 7th, 2010, 07:31 AM   #9
kamikaze
ex-ninjette.org guru :o
 
kamikaze's Avatar
 
Name: Trevor
Location: Barrie, Ontario
Join Date: Jun 2010

Motorcycle(s): 2003 SV1000 S

Posts: 475
I don't suppose you'd still have the headlight?

I might be interested in it depending on the price, and the cost to ship to canada.
kamikaze is offline   Reply With Quote


Old September 7th, 2010, 08:37 AM   #10
CZroe
CPT Falcon
 
CZroe's Avatar
 
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009

Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F

Posts: A lot.
I'm lookin' for rubber bits to replace my rotted ones. I don't know if the rubber bulb over the trip meter reset button can be taken off of the gauge cluster, but mine is now rotted open. Similarly, I don't know if the rubber bit can be removed and installed on the shift lever either but, if so, I can use one of those too. Also, I need that springy rubber bit that sits at the engine side of the clutch cable. Lookin' for any of the non-windscreen well-nuts as well.
CZroe is offline   Reply With Quote


Old September 7th, 2010, 07:45 PM   #11
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
PM's w/ pics sent.

CZ i'll try tt pry off some bits for ya tomorrow.
BuckyNaked is offline   Reply With Quote


Old September 7th, 2010, 07:56 PM   #12
CZroe
CPT Falcon
 
CZroe's Avatar
 
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009

Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F

Posts: A lot.
Quote:
Originally Posted by BuckyNaked View Post
PM's w/ pics sent.

CZ i'll try tt pry off some bits for ya tomorrow.
Thanks! I'll make an offer once I know what you have.
CZroe is offline   Reply With Quote


Old September 8th, 2010, 05:06 AM   #13
bamaland
ninjette.org member
 
bamaland's Avatar
 
Name: chris
Location: picayune,ms
Join Date: Sep 2010

Motorcycle(s): 93 kawi gpz500

Posts: 242
didnt get any pics or pm
bamaland is offline   Reply With Quote


Old September 8th, 2010, 02:06 PM   #14
RaceBikeRentals
Pimpin
 
RaceBikeRentals's Avatar
 
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008

Motorcycle(s): Bunch of em

Posts: 973
Looking for the rear sprocket carrier (hub). Don't need the actual sprocket, just the hub and the nuts. Thanks.
__________________________________________________
-Richard
MotoList.com <<<List your stuff!
RaceBikeRentals is offline   Reply With Quote


Old September 8th, 2010, 03:30 PM   #15
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
bama - taking pics of plastics and headlight tonight to send to ya

race - If I can get the thing off, $30 shipped reasonable?
BuckyNaked is offline   Reply With Quote


Old September 8th, 2010, 03:33 PM   #16
RaceBikeRentals
Pimpin
 
RaceBikeRentals's Avatar
 
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008

Motorcycle(s): Bunch of em

Posts: 973
Sure, please PM me your paypal address.
__________________________________________________
-Richard
MotoList.com <<<List your stuff!
RaceBikeRentals is offline   Reply With Quote


Old September 8th, 2010, 05:16 PM   #17
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
I'm having trouble getting the bolts off, they're torqued to sh!t. Will WD-40 on em be bad? Or is there a better way to get em off? Even tried my impact wrench.

Just had a brilliant idea, I could just ship it to you with the sprocket on still and you can get em out
BuckyNaked is offline   Reply With Quote


Old September 8th, 2010, 05:34 PM   #18
RaceBikeRentals
Pimpin
 
RaceBikeRentals's Avatar
 
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008

Motorcycle(s): Bunch of em

Posts: 973
Hmmmmm.... I need to be able to replace the sprocket with my lightweight race sprocket, and need the nuts to be in good condition. Any luck getting them off?
__________________________________________________
-Richard
MotoList.com <<<List your stuff!
RaceBikeRentals is offline   Reply With Quote


Old September 8th, 2010, 05:56 PM   #19
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Would probably be easier to use a breaker bar with the rim back on the bike. But no front tire, so that plans out. I'll try and see if my brother can help me go at it. Here's pics as is. The previous owner was a dirt bag to the bike. Not sure if they'd be in decent enough condition especially for a race bike. All the studs look straight though. Only "flaw", other than me not being able to get them off, is the damage the previous owner made while stripping the bolt.


BuckyNaked is offline   Reply With Quote


Old September 9th, 2010, 09:33 AM   #20
ChaosFromAbove
Money is a drug.
 
ChaosFromAbove's Avatar
 
Name: Chaos
Location: South Jersey
Join Date: Jun 2010

Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP)

Posts: 251
U have a swingarm bracket cap? I'll give u $5 shipped for one.

Part #11065 in this schematic
ChaosFromAbove is offline   Reply With Quote


Old September 9th, 2010, 02:58 PM   #21
randomwalk101
self wrencher
 
randomwalk101's Avatar
 
Name: john
Location: houston
Join Date: Dec 2008

Motorcycle(s): 08 250r and 07 600r

Posts: A lot.
how much is for the clutch cable?
randomwalk101 is offline   Reply With Quote


Old September 9th, 2010, 03:00 PM   #22
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
$10 shipped decent? That is if I can figure out how to get it off!
BuckyNaked is offline   Reply With Quote


Old September 9th, 2010, 03:01 PM   #23
randomwalk101
self wrencher
 
randomwalk101's Avatar
 
Name: john
Location: houston
Join Date: Dec 2008

Motorcycle(s): 08 250r and 07 600r

Posts: A lot.
Sounds good. Pm me if you can get it out
randomwalk101 is offline   Reply With Quote


Old September 10th, 2010, 02:53 PM   #24
xpandabl3
ninjette.org member
 
xpandabl3's Avatar
 
Name: Eric
Location: Richmond
Join Date: Jun 2010

Motorcycle(s): 2010 Ninja 250r

Posts: 30
Not sure if it's too late, I would like both front and rear wheels quote shipping to Canada V7E5K9. Thanks
xpandabl3 is offline   Reply With Quote


Old September 12th, 2010, 03:33 PM   #25
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Bizump... Headlight and gauges available... And Multiple chain guards available for cheap... Also, front and rear seats
BuckyNaked is offline   Reply With Quote


Old September 14th, 2010, 02:22 PM   #26
00v_Lucky
ninjette.org sage
 
00v_Lucky's Avatar
 
Name: Howard
Location: Cypress, So. Cal.
Join Date: Feb 2009

Motorcycle(s): '09 Candy Thunder Blue Ninja 250R

Posts: 618
Is the list updated?

I am in need of a front stay and gauges
00v_Lucky is offline   Reply With Quote


Old September 14th, 2010, 10:57 PM   #27
Cab305
ninjette.org sage
 
Cab305's Avatar
 
Name: Cab
Location: Miami Beach
Join Date: Mar 2010

Motorcycle(s): Blue 10 250r

Posts: 697
If still available.

I'll take complete left rear set including shift foot lever, $80

Also parts 33040, 33040A and 11012 from here. In swingarm diagram.
Left side complete assembly $30.

PM me for contact.
Cab305 is offline   Reply With Quote


Old September 14th, 2010, 11:08 PM   #28
redeiko0713
ninjette.org member
 
redeiko0713's Avatar
 
Name: mikeJONESS
Location: homeless
Join Date: Sep 2010

Motorcycle(s): 09' 250, 10' 600rr

Posts: 11
carbs? pm sent
redeiko0713 is offline   Reply With Quote


Old September 15th, 2010, 03:29 PM   #29
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Cab - Don't have the left rear sets. Have the SA parts, you need both sets? And not quite sure what the left side assembly is...
BuckyNaked is offline   Reply With Quote


Old September 15th, 2010, 10:59 PM   #30
redeiko0713
ninjette.org member
 
redeiko0713's Avatar
 
Name: mikeJONESS
Location: homeless
Join Date: Sep 2010

Motorcycle(s): 09' 250, 10' 600rr

Posts: 11
B, money sent via paypal, thanks, S
redeiko0713 is offline   Reply With Quote


Old September 16th, 2010, 06:09 PM   #31
CZroe
CPT Falcon
 
CZroe's Avatar
 
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009

Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F

Posts: A lot.
Thanks! Got the little rubber bit that covers the trip meter reset button to replace my rotted one.
CZroe is offline   Reply With Quote


Old September 17th, 2010, 06:49 AM   #32
ChaosFromAbove
Money is a drug.
 
ChaosFromAbove's Avatar
 
Name: Chaos
Location: South Jersey
Join Date: Jun 2010

Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP)

Posts: 251
Thanks again Brandon, got the frame cap yesterday, totally forgot there were 2 different sizes, luckily you sent the right one
ChaosFromAbove is offline   Reply With Quote


Old September 17th, 2010, 08:35 AM   #33
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Glad I got all the right stuff out, enjoy!
BuckyNaked is offline   Reply With Quote


Old September 17th, 2010, 09:17 AM   #34
Cab305
ninjette.org sage
 
Cab305's Avatar
 
Name: Cab
Location: Miami Beach
Join Date: Mar 2010

Motorcycle(s): Blue 10 250r

Posts: 697
Quote:
Originally Posted by BuckyNaked View Post
Cab - Don't have the left rear sets. Have the SA parts, you need both sets? And not quite sure what the left side assembly is...
Sure, I offered $30 for one side, how about $55 for both sides?
It's what I called it. lol.

It's the piece that fits inside the swing arm and allows the rear wheel to be spaced. It has a long bolt that goes through rear swing arm cap and has 2 nuts for adjusting tightening.

Let me know if this is fair? I'll send you paypal.
Cab305 is offline   Reply With Quote


Old September 17th, 2010, 09:29 AM   #35
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
Cab - PM sent
BuckyNaked is offline   Reply With Quote


Old September 20th, 2010, 08:52 PM   #36
D_Goose
ninjette.org newbie
 
Name: J
Location: Oklahoma
Join Date: Sep 2010

Motorcycle(s): None Yet

Posts: 8
Pm sent
D_Goose is offline   Reply With Quote


Old September 22nd, 2010, 08:44 PM   #37
gogiburn
ninjette.org member
 
Name: RIP
Location: nj
Join Date: Jun 2010

Motorcycle(s): have 24

Posts: 53
I need the bolt and nut that hold the clutch lever to the clutch perch $8 shipped parcel post to 07645 or $10 shipped priority Rip
Posted via Mobile Device
gogiburn is offline   Reply With Quote


Old September 23rd, 2010, 02:20 PM   #38
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
got a pic/diagram of the bolt you need?
BuckyNaked is offline   Reply With Quote


Old September 23rd, 2010, 05:52 PM   #39
gogiburn
ninjette.org member
 
Name: RIP
Location: nj
Join Date: Jun 2010

Motorcycle(s): have 24

Posts: 53
NO,do you have a bike?? Look at the clutch,it's the lever on the left handle bar.Look at what holds the lever to the clutch perch.Thats the bolt.The nut is under the lever and it holds the bolt on from coming up and out.
Posted via Mobile Device
gogiburn is offline   Reply With Quote


Old September 23rd, 2010, 06:47 PM   #40
BuckyNaked
ninjette.org member
 
BuckyNaked's Avatar
 
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010

Motorcycle(s): 08' Ninja 250 - 06' CBR600RR

Posts: 76
I figured that was what you were talking about. Just didn't know what a clutch perch was. But I don't have the OEM one.
BuckyNaked is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? PartsNinja Motorcycle-related 75 October 23rd, 2016 04:08 PM
Ordering parts by part number nitehawk 2008 - 2012 Ninja 250R Tech Talk 4 August 29th, 2013 10:07 AM
What is a good price for a bike for parts? ally99 Motorcycle-related 10 February 23rd, 2013 12:17 PM
Pre Gen Part bike part out A7xschecter6661 Motorcycle-related 28 July 5th, 2012 12:49 PM
Front Seat Part Number/Price? setasai Items Wanted 4 September 1st, 2010 08:07 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 12:46 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.