September 23rd, 2012, 09:20 PM | #1 |
ninjette.org member
Name: Paul
Location: Orange County/Inland Empire - CA
Join Date: Sep 2012 Motorcycle(s): 2001 Ninja 250R Posts: 126
|
Is it possible to adjust the friction zone?
When I took the MSF, I practiced on a Ninja 250 and the friction zone was about halfway out from the handlebar. I grew really comfortable with this in the 10 hours I rode that bike.
However, the Ninja 250 I just bought is really different. The friction zone is pretty much all the way out there, a lot farther than I'm comfortable with. I even thought the bike was broken at first because there was no go when I 'thought' I was engaging the clutch. Is there anyway to adjust the friction zone to come closer? |
|
September 23rd, 2012, 09:26 PM | #2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Yes, it can be adjusted a bit. But the best way to do it is by adding adjustable levers. (relatively cheap & easy mod). Related threads:
http://www.ninjette.org/forums/showthread.php?t=10016 http://www.ninjette.org/forums/showthread.php?t=76992 http://www.ninjette.org/forums/showthread.php?t=78500 http://www.ninjette.org/forums/showthread.php?t=93613 http://www.ninjette.org/forums/showthread.php?t=110470
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
September 23rd, 2012, 09:27 PM | #3 |
ninjette.org member
Name: Paul
Location: Orange County/Inland Empire - CA
Join Date: Sep 2012 Motorcycle(s): 2001 Ninja 250R Posts: 126
|
Thanks brah! Much appreciated!
|
|
September 23rd, 2012, 09:43 PM | #4 |
ninjette.org member
Name: Alexander
Location: Santa Rosa
Join Date: Jul 2012 Motorcycle(s): (Sold) 2007 Red Ninja 250r, 2003 Cbr 600 F4i Posts: 137
|
It can be done engine side. Moving the cable up moves it closer to the handle bar and moving it down moves the friction zone outward.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adjust clutch lever friction zone towards the bar | Whiskey | 2008 - 2012 Ninja 250R Tech Talk | 8 | August 8th, 2012 11:25 AM |
Friction Zone. | beqwarrior | 2008 - 2012 Ninja 250R Tech Talk | 6 | January 1st, 2012 08:02 PM |
Friction Zone | Foom | 1986 - 2007 Ninja 250R Tech Talk | 4 | July 6th, 2011 10:31 AM |
Friction Zone | FF0000 | 1986 - 2007 Ninja 250R Tech Talk | 10 | June 24th, 2011 12:33 PM |
Help with the FRICTION ZONE | tjb0012 | Riding Skills | 11 | April 15th, 2010 05:07 AM |
|
|