ninjette.org

Go Back   ninjette.org > 2013 - 2017 Ninja 300 > 2013 - 2017 Ninja 300 Tech Talk

Notices

Reply
 
Thread Tools
Old July 30th, 2017, 10:01 AM   #1
Indy88
ninjette.org member
 
Name: Indy
Location: Maryland
Join Date: Jul 2017

Motorcycle(s): Ninja 300

Posts: 10
Question Ninja 300 rearsets options

I was wondering if anyone racing a ninja 300 has any advice on what adjustabilty, in millimeters, I should be looking for in rear sets. I've been looking at different brands and there seems to be a wide range among the different companies.

Vortex- Back:15-35mm & Up:10-30mm
Gilles- Back:15-35mm & Up:10-30mm
Sato- Back:27.5-52.5mm & Up:25-37.5mm
Bonamici- Back:60-80mm & Up:40-60mm
Lightech- No info but reasonably priced and look great

Also if you're running a combo of rearsets and risers I would like to know that as well
Indy88 is offline   Reply With Quote




Old July 31st, 2017, 11:20 AM   #2
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Welcome Indy!

Bump!
csmith12 is offline   Reply With Quote


Old July 31st, 2017, 11:31 AM   #3
taz
????????????????
 
taz's Avatar
 
Name: T
Location: no where
Join Date: Feb 2016

Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR

Posts: A lot.
MOTM - May '17
No help here i'm all stock yet on them, but welcome
taz is offline   Reply With Quote


Old July 31st, 2017, 12:15 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Welcome Indy!

I think you should narrow down where you want to place your feet. Then select a rearset that will place your feet in that specific spot. I went with Woodcraft since I got a combo deal with clip-on handlebars as well.
DannoXYZ is offline   Reply With Quote


Old July 31st, 2017, 04:03 PM   #5
jrshooter
ninjette.org guru
 
Name: john
Location: placerville
Join Date: Apr 2016

Motorcycle(s): ninja 300

Posts: 386
running vortex love em, but had to make a riser plate for them, to get them up a little more.
jrshooter is offline   Reply With Quote


Old July 31st, 2017, 06:22 PM   #6
snot
sammich maker
 
snot's Avatar
 
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012

Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded)

Posts: A lot.
MOTM - Apr '15
I don't race but I use vortex.
__________________________________________________
https://www.ninjette.org/forums/attachment.php?attachmentid=32634&stc=1&d=1412045508
https://www.brocksperformance.com/VZ...0035+C450.aspx
snot is offline   Reply With Quote


Old July 31st, 2017, 07:57 PM   #7
Yakaru
The Violet Vixen
 
Yakaru's Avatar
 
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012

Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R)

Posts: A lot.
MOTM - Jun '16
I'm running Moth rearsets, love them, but they seem to be either out of business or at least no longer for sale in North America.
__________________________________________________
"most folks racing this bike get it in a competitive state of being with much less invested than you've already put in Saturn." - Alex
Yakaru is offline   Reply With Quote


Old August 1st, 2017, 01:33 PM   #8
Indy88
ninjette.org member
 
Name: Indy
Location: Maryland
Join Date: Jul 2017

Motorcycle(s): Ninja 300

Posts: 10
Thanks for the welcomes everyone. Currently building a race 300 and hoping to compete in my first race before the season is over. Might pull the plug on the Vortex rearsets b/c of part availability. I've read on forums of people combining the Vortex with risers to get the best positioning so I was thinking of going with the Bonamici's. But Hardracing seems to have a promo where you get a $50 gift card with the purchase of Vortex rearsets so cost become negligible.

Though on a side note does anyone have any inputs on the Bonamici's, I was talking to a sales rep for an online retailer and they were saying that the Bonamici's were not as high quality as the Vortex ones. This kind of surprised me since they provide parts for the WSBK TenKate Factory Honda team.
Indy88 is offline   Reply With Quote


Old August 1st, 2017, 01:58 PM   #9
Sirref
Private Joker
 
Sirref's Avatar
 
Name: Ben
Location: Towson, MD
Join Date: Nov 2012

Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin"

Posts: A lot.
MOTM - Mar '14
I love vortex, the pegs are very abrasive so you're able to really dig your feet in and get a lot of grip
__________________________________________________
I see you over there seeing me, do you see the me I think you see?
https://www.ninjette.org/forums/signaturepics/sigpic12146_1.gif
Sirref is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted for Ninja 300:Clipons, rearsets, complete good fairing Street or Track kit alex2631 Items Wanted 0 August 4th, 2016 04:59 AM
2013 or 2014 Ninja 300, or other options (CBR250, Grom, R3, KTM)?? SMman General Motorcycling Discussion 17 June 1st, 2014 03:18 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 01:41 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.