Bell Revolver on Sale, cheap

Heed · October 21st, 2011, 11:30 AM

http://www.motorcycle-superstore.com...Closeouts.aspx

blink · October 21st, 2011, 11:34 AM

I don't trust the design no matter what they say or prove.
It'll snap in a hard enough crashh

setasai · October 21st, 2011, 12:05 PM

You mean modular helmets in general?

Isnt the fact that it has been proven enough to prove that you're wrong? I think that's the definition of the word.

I looked at this helmet but there were tons of mixed reviews on its quality. Usually they say its loud and some parts break prematurely. It is bell's first attempt at a modular. It looks good but I think the next generation will be of better quality. If they make one that is. Good pricepoint though. Better than say a bilt solar modular helmet I think.

Heed · October 21st, 2011, 12:50 PM

I saw it's profile and liked it's design, but then I found out that it was modular and I wasn't too sure about it. =/

setasai · October 21st, 2011, 01:20 PM

To be honest. I like modular helmets. I'm more of a touring type of rider though. I like going on trips to a destination and enjoying the ride along the way so modular helmets are the perfect compromise. Of course I wouldnt just buy any modular helmet. It has to be relatively supported as being decently safe. FYI, schubert modular helmets are ECE certified... they are however $700.

blink · October 21st, 2011, 02:43 PM

No, I don't think so.
Harley hats have been "proven to protect your head, but your face will get ****ed

setasai · October 21st, 2011, 04:46 PM

Thats doesnt really help your point.

Harley "hats" as you call it are proven to protect your head by certifying it and as you said it does just that. It was never proven to protect your face. Your example is like saying your jacket doesnt protect your knees. Duh!

Magz · October 21st, 2011, 08:07 PM

Testing or not, I just can't come to terms with having any kind of potential fail point in my helmet. Sure, it may be convenient, and all the tests may say it's safe, but I'd rather wear a traditional full-face than have my face skipping the pavement when a faulty hinge fails in a crash.

Swampotter · October 21st, 2011, 08:17 PM

Quote:

Originally Posted by Heed

http://www.motorcycle-superstore.com...Closeouts.aspx

Thanks for the lead. I picked one up.

dougherty · November 18th, 2011, 04:27 AM

Looks good, fits well, and seems pretty well made. Im happy with it

camaroz1985 · November 18th, 2011, 08:36 AM

I will probably pick on up (dang you for bringing this to my attention). I'd like to see an acutal picture or someone's opinion on the hi-viz though. Some pictures look yellow and others look more neon yellow/green like I am looking for.

saxnbass · November 21st, 2011, 08:04 AM

Sorry if this is in the wrong section, move if needed; or delete if deemed inappropriate.

Anyways. Motorcycle Superstore's Super Deal of the Day today is the Bell Revolver Helmet at $85. If you're looking for a modular helmet and you're wanting a decent one for cheap, grab it today HERE.

NathanUc · November 21st, 2011, 08:53 AM

Quote:

Originally Posted by saxnbass

Sorry if this is in the wrong section, move if needed; or delete if deemed inappropriate.

Anyways. Motorcycle Superstore's Super Deal of the Day today is the Bell Revolver Helmet at $85. If you're looking for a modular helmet and you're wanting a decent one for cheap, grab it today HERE.

Nice find.

I'm always so tempted to buy one of these until I read the reviews. For $85 I might just have to give it a go for myself though

Thanks :Thumbsup:

NathanUc · November 21st, 2011, 09:01 AM

Quote:

Originally Posted by camaroz1985

I will probably pick on up (dang you for bringing this to my attention). I'd like to see an acutal picture or someone's opinion on the hi-viz though. Some pictures look yellow and others look more neon yellow/green like I am looking for.

Today they are $85 on motosuperstore (deal of the day).

http://www.ninjette.org/forums/showthread.php?t=91439

camaroz1985 · November 21st, 2011, 09:43 AM

Well that seals the deal. I will be ordering one or two tonight.

cerberusrex25 · November 21st, 2011, 12:26 PM

Nice find, ordered me one just now. Thanks for posting this.

cerberusrex25 · November 21st, 2011, 12:32 PM

As someone looking to get a cheap intro helmet, that deal made it for me. I just bought me one and should be coming in a few days. Glad I did because is the cheaper version of the helmet I am saving for, The bell Star.

coondog · November 21st, 2011, 04:07 PM

Quote:

Originally Posted by setasai

Thats doesnt really help your point.

Harley "hats" as you call it are proven to protect your head by certifying it and as you said it does just that. It was never proven to protect your face. Your example is like saying your jacket doesnt protect your knees. Duh!

3 posts, envy your controled humility and howl at the moon. I can't take some of these f**knuts and obviously let 'em know. Thanked Alex for the Delete button which I stumbled on during a hiatus. You're an example for me to follow is all, thanks for the light.

I noticed on searches that good modulars really cost, never knew if it was the technical or great convenience attributes.

setasai · November 21st, 2011, 04:23 PM

Quote:

Originally Posted by coondog

3 posts, envy your controled humility and howl at the moon. I can't take some of these f**knuts and obviously let 'em know. Thanked Alex for the Delete button which I stumbled on during a hiatus. You're an example for me to follow is all, thanks for the light.

I wasnt sure if you were quoting me but meant to talk to Alex or who...

Everybody has their beliefs, I was just trying to clarify things that didnt make sense. Hopefully so that everybody can make informed choices. Personally, I use the EDIT button to cross things out so people know where I've made mistakes and how I've corrected them by leaving a comment. I'm not ashamed of my ignorance on certain things but I do welcome informed advice and comments. Isnt that how we all should be?

Great modulars are just like great helmets. There are a ton of things that can be changed and many levels. Regardless, it's still a helmet so fit and protection is important. Everything else is 2ndary. Try on a multitec and a schubert C3... so far those 2 are the best fitting ones for me.

camaroz1985 · November 22nd, 2011, 08:12 AM

Ordered two last night. One for me, and one for my fiancee. Both are hi-viz yellow. She wants to add pink flowers to hers

dougherty · November 22nd, 2011, 08:55 AM

Quote:

Originally Posted by camaroz1985

Ordered two last night. One for me, and one for my fiancee. Both are hi-viz yellow. She wants to add pink flowers to hers

cerberusrex25 · November 23rd, 2011, 08:41 PM

Got mine today, it is awesome. I like it a lot and can't wait to take it on the road, only thing I don't like is that it makes my head look HUUUUGE.

Heed · November 23rd, 2011, 09:37 PM

Quote:

Originally Posted by cerberusrex25

Got mine today, it is awesome. I like it a lot and can't wait to take it on the road, only thing I don't like is that it makes my head look HUUUUGE.

show some pics

cerberusrex25 · November 24th, 2011, 08:04 AM

I will, when Im done cooking and cleaning for turkey day.

Edit: Caved in and took a few, wont have a full review until I get my bike up and ready but so far I love the fit and look of it, I may even buy me the dark smoke visor to complete the badass look. Here are the pics:

MotoED · November 30th, 2011, 02:10 AM

$85? That is a steal! I was just looking at the same model at another gear website. They have it for $100. Wasn't sure about the whole modular helmet thing, was reading up on it and it seems pretty cool. Does this one also include those integrated sun glasses?
@cerberusrex25 looking forward to that review.

camaroz1985 · November 30th, 2011, 10:46 AM

Got my 2 on monday, and they both fit well. It is a little hard to get my glasses on while wearing the helmet, but they do work. Might have to modify the padding as I saw someone did on webbikeworld.

Initial impressions are good. They seem decently made, but there are some glaring issues with the supplied accessories. First the breath guard on the top of the chin bar hits the rubber seal of the eye port when you open the chinbar. This can be fixed with a little trimming of the guard with a razor blade, but I think Bell should have fixed this first. Also my helmet came with a breath deflector/chin curtain that I haven't seen in any of the reviews so far (maybe it was a late addition, my helmet has a manufacture date of 8/11. Did your's have this cerberusrex25). It snaps into the vents in the chin bar and kind of wraps around your chin. There were a lot of reviews that said it needed a chin curtain so maybe this is Bell's answer. Unfortunately with it installed you can't open the chin bar more than about half way, as in interferes with the upper part of the helmet. My temporary solution was to remove both the breath guard and chin curtain.

I only took a short ride to work this morning, and I would say the helmet is about as noisy or maybe slightly more so than my HJC IS-16 (on a Versys with a Givi windscreen, and I always wear ear plugs). There is a lot of air that comes in under the chin bar so I will be trying to get the curtain to work for the winter. Also the inner sunshield has good coverage of the eye port, but is not dark enough. I will be getting two dark smoke inner visors (had to do the same for the IS-16). Also the anti-fog coating seems to work great. I had to keep the visor on my IS-16 cracked until I get out of town and get up to speed, but the visor on the Revolver can be closed, and left closed even at traffic lights (well until my glasses started to fog up).

All in all I think it was a good purchase, especially for $85. It is my first modular, and I think I will like it, but I haven't had enough time with my head in it yet to determine that.

Here is a quick picture I snapped at the office.

Also tomorrow my Scala Rider G4 will arrive and I will give that a try. I have used the Q2 with my IS-16, but got a good cyber monday deal on a set of G4's and wanted to upgrade to hopefully only have to take one device with me for wireless music and gps.

I have a Q2 available for a very reasonable price if anyone is interested. I was thinking $75 shipped.

cerberusrex25 · November 30th, 2011, 11:49 AM

Quote:

Originally Posted by MotoED

Does this one also include those integrated sun glasses?
@cerberusrex25 looking forward to that review.

Yes it does

Quote:

Originally Posted by camaroz1985

Also my helmet came with a breath deflector/chin curtain that I haven't seen in any of the reviews so far (maybe it was a late addition, my helmet has a manufacture date of 8/11. Did your's have this cerberusrex25). It snaps into the vents in the chin bar and kind of wraps around your chin. There were a lot of reviews that said it needed a chin curtain so maybe this is Bell's answer. Unfortunately with it installed you can't open the chin bar more than about half way, as in interferes with the upper part of the helmet. My temporary solution was to remove both the breath guard and chin curtain.

If It does I did not see it, can you take a pic of of it, maybe they included it on the late production models but just want to make sure.

camaroz1985 · December 1st, 2011, 09:16 AM

Quote:

Originally Posted by cerberusrex25

Yes it does

If It does I did not see it, can you take a pic of of it, maybe they included it on the late production models but just want to make sure.

Here are a few pictures of the chin curtain. Again sorry for the quality they are from my phone.

I used the curtain today on the way into work, and it made a huge difference. It does hit the weatherstripping above the visor, but a little force and it will go passed, and allow the chin bar to open fully. I just don't like that, as I would assume it would eventually cause problems with sealing. I will look into a way to fix it, but don't know how much is possible. Also I don't know how well an intercom mic would fit with the chin curtain in place. My G4 comes tonight so I will test it with and without the curtain.

cerberusrex25 · December 1st, 2011, 10:22 AM

I don't think mine has the chin curtain, I will go and look for it when I get back home(working out of town), I just hope I didnt drop it somewhere when I took it out of the box.

iplante · August 3rd, 2012, 09:31 PM

Old thread, but I just picked up (by that, I mean ordered online) a Bell Revolver matte black on sale.

My HJC is pretty scratched up from dropping it but it's still nice so I'm thinking of painting it when I paint my bike, same color. What sold me on the revolver other than the price is the slide down sun visor.

I should get it Monday or Tuesday. Pretty excited. I need to get me some reflective tape to add to it though.

Jiggles · August 3rd, 2012, 10:32 PM

So cheap and so tempting! ARG! I think I have enough though

7oxSin · August 4th, 2012, 07:45 AM

Quote:

Originally Posted by Jiggles

So cheap and so tempting! ARG! I think I have enough though

jiggles slowly step ur helmet addict butt away from this thread lol

iplante · August 4th, 2012, 08:33 AM

I thought i was bumping a thread in the Gear section, not the for sale section! Sorry Jiggles!

ryan.chin · August 5th, 2012, 09:32 AM

This is the first helmet I bought, and I'm pretty disappointed with it. The visor levers that allow you to remove the visor and put it back on are very poor design and quality. A few plastic parts broke after only about 3 weeks. The helmet is much larger than that of the same size bell helmets, and it seems to weigh a bit more, but I guess that's because of the internal visor.

The helmet... is also extremely loud. I tried out my friends Bell Star, and it was about 50% quieter. Also, I bought the U-Clear HBC 100 and put them into my helmet, which was easy enough... but I discovered the speaker holes are way too far up on the head, resulting in a very quiet set of speakers. I had to actually cut a bit out of the foam so I could put the speakers in.

I'll be buying a new helmet very soon. Just my 2 Cents.

iplante · August 7th, 2012, 06:37 PM

The place I ordered my helmet from just called - they are out of the old model in XS for me so they will send me the new model for the same price

I should call and ask for the rally stripe one!

October 21st, 2011, 11:30 AM	#1
Heed ninjette.org certified postwhore Name: John Location: Illinois Join Date: Aug 2011 Motorcycle(s): None yet, yet. Posts: A lot.	Bell Revolver for $110? http://www.motorcycle-superstore.com...Closeouts.aspx

October 21st, 2011, 11:34 AM	#2
blink Always. Name: Alex Location: Calgary, AB Join Date: Mar 2011 Motorcycle(s): '08 Ninja 250, '05 GSX-R600 Posts: A lot.	I don't trust the design no matter what they say or prove. It'll snap in a hard enough crashh __________________________________________________ blink-182

October 21st, 2011, 02:43 PM	#6
blink Always. Name: Alex Location: Calgary, AB Join Date: Mar 2011 Motorcycle(s): '08 Ninja 250, '05 GSX-R600 Posts: A lot.	No, I don't think so. Harley hats have been "proven to protect your head, but your face will get ****ed __________________________________________________ blink-182

October 21st, 2011, 08:07 PM	#8
Magz ninjette.org member Name: Jake Location: MO Join Date: Oct 2011 Motorcycle(s): '06 Ninja 250 Posts: 87	Testing or not, I just can't come to terms with having any kind of potential fail point in my helmet. Sure, it may be convenient, and all the tests may say it's safe, but I'd rather wear a traditional full-face than have my face skipping the pavement when a faulty hinge fails in a crash. __________________________________________________ Behind every great man is a woman rolling her eyes. - Jim Carrey

November 18th, 2011, 04:27 AM	#10
dougherty ninjette.org member Name: Tim Location: Connecticut Join Date: Nov 2011 Motorcycle(s): 2009 HD Street BOB 2010 HD Roadglide Posts: 64	I snagged one Looks good, fits well, and seems pretty well made. Im happy with it

October 21st, 2011, 12:05 PM	#3
setasai ninjette.org certified postwhore Name: Brian Location: Detroit, MI Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.	You mean modular helmets in general? Isnt the fact that it has been proven enough to prove that you're wrong? I think that's the definition of the word. I looked at this helmet but there were tons of mixed reviews on its quality. Usually they say its loud and some parts break prematurely. It is bell's first attempt at a modular. It looks good but I think the next generation will be of better quality. If they make one that is. Good pricepoint though. Better than say a bilt solar modular helmet I think.

October 21st, 2011, 12:50 PM	#4
Heed ninjette.org certified postwhore Name: John Location: Illinois Join Date: Aug 2011 Motorcycle(s): None yet, yet. Posts: A lot.	I saw it's profile and liked it's design, but then I found out that it was modular and I wasn't too sure about it. =/

October 21st, 2011, 01:20 PM	#5
setasai ninjette.org certified postwhore Name: Brian Location: Detroit, MI Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.	To be honest. I like modular helmets. I'm more of a touring type of rider though. I like going on trips to a destination and enjoying the ride along the way so modular helmets are the perfect compromise. Of course I wouldnt just buy any modular helmet. It has to be relatively supported as being decently safe. FYI, schubert modular helmets are ECE certified... they are however $700.

October 21st, 2011, 04:46 PM	#7
setasai ninjette.org certified postwhore Name: Brian Location: Detroit, MI Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.	Thats doesnt really help your point. Harley "hats" as you call it are proven to protect your head by certifying it and as you said it does just that. It was never proven to protect your face. Your example is like saying your jacket doesnt protect your knees. Duh!

November 18th, 2011, 08:36 AM	#11
camaroz1985 ninjette.org certified postwhore Name: Ryan Location: Carlisle, PA Join Date: Nov 2008 Motorcycle(s): 2008 WR250R, 2006 Ural Raven (Sold), 2009 Versys Green (Sold), 2008 Ninja 250R Green (Sold) Posts: A lot.	I will probably pick on up (dang you for bringing this to my attention). I'd like to see an acutal picture or someone's opinion on the hi-viz though. Some pictures look yellow and others look more neon yellow/green like I am looking for.

November 21st, 2011, 08:04 AM	#12
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Bell Revolver on Sale, cheap Sorry if this is in the wrong section, move if needed; or delete if deemed inappropriate. Anyways. Motorcycle Superstore's Super Deal of the Day today is the Bell Revolver Helmet at $85. If you're looking for a modular helmet and you're wanting a decent one for cheap, grab it today HERE.

November 21st, 2011, 09:43 AM	#15
camaroz1985 ninjette.org certified postwhore Name: Ryan Location: Carlisle, PA Join Date: Nov 2008 Motorcycle(s): 2008 WR250R, 2006 Ural Raven (Sold), 2009 Versys Green (Sold), 2008 Ninja 250R Green (Sold) Posts: A lot.	Well that seals the deal. I will be ordering one or two tonight.

November 21st, 2011, 12:26 PM	#16
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	Nice find, ordered me one just now. Thanks for posting this.

November 21st, 2011, 12:32 PM	#17
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	As someone looking to get a cheap intro helmet, that deal made it for me. I just bought me one and should be coming in a few days. Glad I did because is the cheaper version of the helmet I am saving for, The bell Star.

November 22nd, 2011, 08:12 AM	#20
camaroz1985 ninjette.org certified postwhore Name: Ryan Location: Carlisle, PA Join Date: Nov 2008 Motorcycle(s): 2008 WR250R, 2006 Ural Raven (Sold), 2009 Versys Green (Sold), 2008 Ninja 250R Green (Sold) Posts: A lot.	Ordered two last night. One for me, and one for my fiancee. Both are hi-viz yellow. She wants to add pink flowers to hers

November 23rd, 2011, 08:41 PM	#22
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	Got mine today, it is awesome. I like it a lot and can't wait to take it on the road, only thing I don't like is that it makes my head look HUUUUGE.

November 24th, 2011, 08:04 AM	#24
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	I will, when Im done cooking and cleaning for turkey day. Edit: Caved in and took a few, wont have a full review until I get my bike up and ready but so far I love the fit and look of it, I may even buy me the dark smoke visor to complete the badass look. Here are the pics:

November 30th, 2011, 02:10 AM	#25
MotoED ninjette.org guru Name: Edd Location: Los Angeles-CALI Join Date: Aug 2011 Motorcycle(s): 2011 SE Pearl/Ebony Ninja 250R Posts: 376	$85? That is a steal! I was just looking at the same model at another gear website. They have it for $100. Wasn't sure about the whole modular helmet thing, was reading up on it and it seems pretty cool. Does this one also include those integrated sun glasses? @cerberusrex25 looking forward to that review. __________________________________________________ [#4]

November 30th, 2011, 10:46 AM	#26
camaroz1985 ninjette.org certified postwhore Name: Ryan Location: Carlisle, PA Join Date: Nov 2008 Motorcycle(s): 2008 WR250R, 2006 Ural Raven (Sold), 2009 Versys Green (Sold), 2008 Ninja 250R Green (Sold) Posts: A lot.	Got my 2 on monday, and they both fit well. It is a little hard to get my glasses on while wearing the helmet, but they do work. Might have to modify the padding as I saw someone did on webbikeworld. Initial impressions are good. They seem decently made, but there are some glaring issues with the supplied accessories. First the breath guard on the top of the chin bar hits the rubber seal of the eye port when you open the chinbar. This can be fixed with a little trimming of the guard with a razor blade, but I think Bell should have fixed this first. Also my helmet came with a breath deflector/chin curtain that I haven't seen in any of the reviews so far (maybe it was a late addition, my helmet has a manufacture date of 8/11. Did your's have this cerberusrex25). It snaps into the vents in the chin bar and kind of wraps around your chin. There were a lot of reviews that said it needed a chin curtain so maybe this is Bell's answer. Unfortunately with it installed you can't open the chin bar more than about half way, as in interferes with the upper part of the helmet. My temporary solution was to remove both the breath guard and chin curtain. I only took a short ride to work this morning, and I would say the helmet is about as noisy or maybe slightly more so than my HJC IS-16 (on a Versys with a Givi windscreen, and I always wear ear plugs). There is a lot of air that comes in under the chin bar so I will be trying to get the curtain to work for the winter. Also the inner sunshield has good coverage of the eye port, but is not dark enough. I will be getting two dark smoke inner visors (had to do the same for the IS-16). Also the anti-fog coating seems to work great. I had to keep the visor on my IS-16 cracked until I get out of town and get up to speed, but the visor on the Revolver can be closed, and left closed even at traffic lights (well until my glasses started to fog up). All in all I think it was a good purchase, especially for $85. It is my first modular, and I think I will like it, but I haven't had enough time with my head in it yet to determine that. Here is a quick picture I snapped at the office. Also tomorrow my Scala Rider G4 will arrive and I will give that a try. I have used the Q2 with my IS-16, but got a good cyber monday deal on a set of G4's and wanted to upgrade to hopefully only have to take one device with me for wireless music and gps. I have a Q2 available for a very reasonable price if anyone is interested. I was thinking $75 shipped.

December 1st, 2011, 10:22 AM	#29
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	I don't think mine has the chin curtain, I will go and look for it when I get back home(working out of town), I just hope I didnt drop it somewhere when I took it out of the box.

August 3rd, 2012, 09:31 PM	#30
iplante I ride like a granny Name: Isabelle Location: Minneapolis Join Date: Jun 2012 Motorcycle(s): 2003 Ninja 250R - EX250F Posts: 521 Blog Entries: 1	Old thread, but I just picked up (by that, I mean ordered online) a Bell Revolver matte black on sale. My HJC is pretty scratched up from dropping it but it's still nice so I'm thinking of painting it when I paint my bike, same color. What sold me on the revolver other than the price is the slide down sun visor. I should get it Monday or Tuesday. Pretty excited. I need to get me some reflective tape to add to it though.

August 3rd, 2012, 10:32 PM	#31
Jiggles Jigglin' your Jiglets Name: Sean Location: San Jose, Ca Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much. Blog Entries: 1 MOTM - Apr '13	So cheap and so tempting! ARG! I think I have enough though __________________________________________________ If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs

August 4th, 2012, 08:33 AM	#33
iplante I ride like a granny Name: Isabelle Location: Minneapolis Join Date: Jun 2012 Motorcycle(s): 2003 Ninja 250R - EX250F Posts: 521 Blog Entries: 1	I thought i was bumping a thread in the Gear section, not the for sale section! Sorry Jiggles!

August 5th, 2012, 09:32 AM	#34
ryan.chin ninjette.org sage Name: Ryan Location: Columbia, MD Join Date: Jul 2012 Motorcycle(s): 2007 R6 Posts: 605	This is the first helmet I bought, and I'm pretty disappointed with it. The visor levers that allow you to remove the visor and put it back on are very poor design and quality. A few plastic parts broke after only about 3 weeks. The helmet is much larger than that of the same size bell helmets, and it seems to weigh a bit more, but I guess that's because of the internal visor. The helmet... is also extremely loud. I tried out my friends Bell Star, and it was about 50% quieter. Also, I bought the U-Clear HBC 100 and put them into my helmet, which was easy enough... but I discovered the speaker holes are way too far up on the head, resulting in a very quiet set of speakers. I had to actually cut a bit out of the foam so I could put the speakers in. I'll be buying a new helmet very soon. Just my 2 Cents.

August 7th, 2012, 06:37 PM	#35
iplante I ride like a granny Name: Isabelle Location: Minneapolis Join Date: Jun 2012 Motorcycle(s): 2003 Ninja 250R - EX250F Posts: 521 Blog Entries: 1	The place I ordered my helmet from just called - they are out of the old model in XS for me so they will send me the new model for the same price I should call and ask for the rally stripe one!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tons of AGV Sport Gloves For Sale CHEAP	outasight20	Gear-related	18	July 23rd, 2014 06:38 AM
[RoadRUNNER] - Bell Revolver Evo Helmet	Ninjette Newsbot	Motorcycling News	0	June 15th, 2013 01:30 PM
eBay : - Cheap teknic chicane suit for sale	psych0hans	Gear-related	0	June 18th, 2012 10:53 AM
[webbikeworld.com] - Bell Revolver Review	Ninjette Newsbot	Motorcycling News	0	March 12th, 2011 02:50 PM
[webbikeworld.com] - Bell Revolver	Ninjette Newsbot	Motorcycling News	0	February 22nd, 2011 04:10 PM