|
July 25th, 2012, 11:54 AM
|
#1 |
|
ninjette.org newbie
Name: John
Location: San Diego
Join Date: Jul 2012 Motorcycle(s): Ninja 250r Posts: 6
|
turn light indicator stopped working...
I have the proton flush mount lights and the Blaster-X Integrated LED Tail Light installed on my bike. i also installed the no-cut diode kit that came with it and the electronic flasher relay... everything worked for a while and then i noticed that my flasher indicator on the bike didn't blink sometimes when i used the signals and the proton lights blinked dim... the flasher relay was also making a "click click click click" sound rather then the "click click...click click" so i changed out the flasher relay for a new one and now it works, but the rear turn signals strobe with the proton lights, and the gauge indicator for the flasher still doesn't work... any thoughts?
|
|
|
|
July 25th, 2012, 01:19 PM
|
#2 |
|
ninjette.org newbie
Name: John
Location: San Diego
Join Date: Jul 2012 Motorcycle(s): Ninja 250r Posts: 6
|
Ok so I took the bike apart and re checked all the connections... I grounded the ground wire from the diode kit directly to the batt this time and re installed the original electronic relay i had and everything including the gauge light worked... I'm pretty sure the relay is going bad though bc sometimes it will work fine and other times the lights will blink dimly... Could that be right?
|
|
|
|
|
July 25th, 2012, 02:04 PM
|
#3 |
|
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
I don't think the relay has to do with the dim blinking. It just sounds like you didn't have a proper ground
|
|
|
|
|
July 25th, 2012, 02:31 PM
|
#4 |
|
ninjette.org newbie
Name: John
Location: San Diego
Join Date: Jul 2012 Motorcycle(s): Ninja 250r Posts: 6
|
It's grounded directly to the batt
|
|
|
|
|
July 26th, 2012, 09:51 AM
|
#5 |
|
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Trying connecting your stock front signals and see if the same thing happens. If it doesn't, then it might be your protons.
|
|
|
|
|
July 26th, 2012, 06:12 PM
|
#6 |
|
ninjette.org newbie
Name: John
Location: San Diego
Join Date: Jul 2012 Motorcycle(s): Ninja 250r Posts: 6
|
Figured it out! One of the diods in the "no cut diode kit" was bad... Cut them out and put two of my own in and boom worked like a champ!
|
|
|
|
|
July 26th, 2012, 07:52 PM
|
#7 |
|
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Cool!
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Indicator Problem - Turn Signals Not Working | alex192 | 2008 - 2012 Ninja 250R Tech Talk | 6 | December 7th, 2014 09:56 AM |
| Turn signals stopped working. | Insan3guy | General Motorcycling Discussion | 1 | October 15th, 2013 10:17 PM |
| Blinkers just stopped working | coluk33 | 1986 - 2007 Ninja 250R Tech Talk | 8 | May 6th, 2013 09:13 PM |
| tach stopped working -.- | ajaygraci | 2008 - 2012 Ninja 250R Tech Talk | 23 | March 31st, 2012 10:55 PM |
| Turn Signals Stopped Working! | DisciplesHeart | 2008 - 2012 Ninja 250R Tech Talk | 18 | March 21st, 2012 08:45 PM |
|
|
