April 1st, 2019, 11:26 PM | #1 |
ninjette.org member
Name: Vasileios
Location: athens
Join Date: Jan 2019 Motorcycle(s): Ninja250r Posts: 14
|
250sl hugger for 250r?
Hello team,
I was wondering if anyone has tried ninja's 250sl hugger (pn:36014-0562) fitting it in the r version.I guess it won't be plug and play but if it is easily modded i guess i should give it a try.Cost is around 30euro.Also my rear is 150/60/17 will it fit? |
|
April 2nd, 2019, 05:11 PM | #2 |
EX500 full of EX250 parts
Name: Bill
Location: Grand Rapids-ish, MI
Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot.
Blog Entries: 1
MOTM - Aug '15
|
Just looking at the parts diagram, it looks like it uses the same mounting points on the left side. You could probably drill and tap a hole in the crossbrace for that one. It looks like there's a couple extra tabs on the right side for it to mount to. You may be able to rig something up - I believe people were using zipties on the right side with the Byson hugger.
The 300's mini-hugger chainguard mounts on the 250 swingarm with just a couple extra holes. This one might not be too different either. The Z250SL's trellis frame is obviously quite different, but the swingarm looks pretty similar (along with a number of other parts). If you wanted to go that far, you might be able to swap the whole swingarm in to get all the correct mounting points.
__________________________________________________
*** Unregistered, I'm not your mom and I'm not paying for your parts, so do whatever you want with your own bike. *** |
|
April 5th, 2019, 07:53 AM | #3 |
Nooblet
Name: Akima
Location: England
Join Date: Jul 2011 Motorcycle(s): 2011 Ninja 250R FI Posts: A lot.
Blog Entries: 5
MOTM - Oct '13
|
I don't know about that hugger, but a bunch of people on this forum have successfully fitted a Honda CBR250R hugger to the Ninja 250R (2008+). It's cheap and looks great. You just have to cut a small bit of plastic off of it and use strong zip ties to hold it on the bike. Here's one of the threads on it:
https://www.ninjette.org/forums/showthread.php?p=967120
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[visordown.com] - Kawasaki Ninja 250SL and Z250SL unveiled | Ninjette Newsbot | Motorcycling News | 0 | November 4th, 2014 03:00 AM |
|
|