Parting out 08 - who needs parts? - Page 4

garth285 · April 14th, 2015, 06:38 AM

Quote:

Originally Posted by DanielObrien42

Do you still have the damaged passenger seat? NewGen? How much?

I do, PM me an offer and we'll get it goin!

Carnitas · April 30th, 2015, 09:55 AM

Do the side fairings mount up securely? How much shipped to 97210?

Hasersys · May 5th, 2015, 08:14 PM

What is left of the front end an rear end, I am in vero. I need forks, triples, front and rear wheel, also some small parts here an there.

garth285 · May 6th, 2015, 08:30 AM

Quote:

Originally Posted by Hasersys

What is left of the front end an rear end, I am in vero. I need forks, triples, front and rear wheel, also some small parts here an there.

Unfortunatly I dont have any of those big parts, wheels, triple, forks. What small parts do you need?

Hasersys · May 6th, 2015, 09:41 AM

Far left spacer for rear wheel. Also the bolt that holds the brake guide braket off the swing arm. Probably alot more than I can think of right now. If you ever run across another bike your parting out send me a msg. I am right down the road. Converting pregen to newgen front end an rear end.

Joekuh · May 7th, 2015, 08:42 PM

Anything left of the rear wiring harness?

skilletmo · May 9th, 2015, 01:00 PM

Do you have the headlight socket? It is piece 23017 on the picture i attached. It connects to the headlight bulb in the rubber housing.

Qomomoko · May 9th, 2015, 01:51 PM

Quote:

Originally Posted by Hasersys

Far left spacer for rear wheel. Also the bolt that holds the brake guide braket off the swing arm. Probably alot more than I can think of right now. If you ever run across another bike your parting out send me a msg. I am right down the road. Converting pregen to newgen front end an rear end.

I got most of the parts from garth for the front and rear conversion..
in process of painting...

Hasersys · May 9th, 2015, 02:03 PM

I am very interested in seeing more of his turbo 250.

bkbaseballa16 · May 18th, 2015, 11:17 AM

Do you still have the front wheel? I only need the rim. I'm local in West Palm.

DmbShn41 · May 25th, 2015, 09:14 AM

Still have the rear fairings? I know you said paint wasn't the greatest but I plan on repainting, as long as tabs were all good. Can you quote shipping to 45244?

CZroe · June 5th, 2015, 06:12 AM

Quote:

Originally Posted by skilletmo

Do you have the headlight socket? It is piece 23017 on the picture i attached. It connects to the headlight bulb in the rubber housing.

I have it left over after an HID conversion. No clue where I put it. If I find it, you still want?

June 5th, 2015, 06:19 PM

I need a shifter if you still have it

garth285 · June 6th, 2015, 10:55 AM

Quote:

Originally Posted by rjizzle36

I need a shifter if you still have it

What part exactly do you need?

garth285 · June 6th, 2015, 10:55 AM

Quote:

Originally Posted by DmbShn41

Still have the rear fairings? I know you said paint wasn't the greatest but I plan on repainting, as long as tabs were all good. Can you quote shipping to 45244?

Yes I do have the tail pieces for sale. I'll get a shipping quote later today and PM you!

June 6th, 2015, 03:02 PM

Quote:

Originally Posted by garth285

What part exactly do you need?

I broke the actual shift lever, the part I shift with my foot snapped off.

DmbShn41 · June 6th, 2015, 05:04 PM

Quote:

Originally Posted by garth285

Yes I do have the tail pieces for sale. I'll get a shipping quote later today and PM you!

Ahhhhhh....I just made an offer on a newer set but will accept my fate and honor both offers! Any chance you have the front wheel fender still?

oblivion007 · June 6th, 2015, 09:49 PM

Do you still have the rear fender? I thnk you had listed it with two pictures under battery tray. Also that piece i asked about before, the upper cowling frame bit?

skilletmo · June 9th, 2015, 10:33 AM

Quote:

Originally Posted by CZroe

I have it left over after an HID conversion. No clue where I put it. If I find it, you still want?

I actually found a almost identical piece at orielly. I will post the number here and on a new thread. I couldn't find it any where on any forum describing or naming the part so i will post a new thread on the part number and other details of where you can pick it up for less than 10$ instead of ordering it for more at a place like bikebandit for double the price because you simply cant find it anywhere else. Its off a car, mazda 3 if i remember. I will post a thread like i said when i get home and check the receipt and part number.

Thanks though! Appreciate the effort bud

xxmeleemagicxx · June 29th, 2015, 02:12 PM

Do you have the gas cap available?

garth285 · June 29th, 2015, 02:21 PM

Quote:

Originally Posted by xxmeleemagicxx

Do you have the gas cap available?

I do have a gas cap but I was going to try to sell the lock set complete (gas cap, ignition, and truck lock)

Interested in the whole set or just need the gas cap?

JHP_Goose · June 29th, 2015, 02:40 PM

Hi ! Do you still have a foot brake lever ?

xxmeleemagicxx · June 29th, 2015, 03:21 PM

Quote:

Originally Posted by garth285

I do have a gas cap but I was going to try to sell the lock set complete (gas cap, ignition, and truck lock)

Interested in the whole set or just need the gas cap?

I just need the gas cap, really. I'll PM you. Thanks.

psykown · June 29th, 2015, 03:24 PM

Hey Garth do you know if the front turnsignals fit an 07? If they do I can pick them up right away. I am in Daytona.

champofgames · July 4th, 2015, 01:03 PM

Hey! I was wondering if you still had the rear brake pedal bracket:

And also the rear passenger bracket?

garth285 · July 4th, 2015, 01:05 PM

I know I have the driver rearset but I'll check on a passenger one in a minute. I will pm you back shortly

champofgames · July 4th, 2015, 01:07 PM

Alright, thanks man! Those are the only two parts that I need to get back on riding! Haha.

WolFeYeZ · July 20th, 2015, 03:28 PM

Im looking for a front fairing stay for 08-current ninja 250. Got one?

colombianodny · August 13th, 2015, 03:56 AM

how is the headlight?
and if in good condition how much?

colombianodny · August 13th, 2015, 03:58 AM

hey how is the headlight? i need the entire assembly and how much?

cookiebug79 · August 13th, 2015, 08:38 AM

If the OP doesn't have a headlight, I've got this one. There's a big scratch on the front, but other than that it should be functional:

colombianodny · August 13th, 2015, 08:41 AM

Quote:

Originally Posted by cookiebug79

If the OP doesn't have a headlight, I've got this one. There's a big scratch on the front, but other than that it should be functional:

I have an 09 250, email me colombianodny@gmail.com with the price.

garth285 · August 13th, 2015, 09:44 AM

I dont have a headlight sorry.

feernando · August 13th, 2015, 01:13 PM

Quote:

Originally Posted by garth285

I dont have a headlight sorry.

what parts do you still have?

Hoons54 · August 13th, 2015, 01:53 PM

Do you have front left blinker and driver seat?

garth285 · August 13th, 2015, 05:16 PM

Quote:

Originally Posted by Hoons54

Do you have front left blinker and driver seat?

No blinker but I do have a drivers seat. Pm me if you need it

garth285 · August 14th, 2015, 05:57 AM

Parts Still Available:

Frame
Swingarm
suspension knuckle
rear axle
battery tray
radiator
wiring harness
coils
front fairing stay
lock set
airbox
engine

I know have some other stuff and will update later.

feernando · August 14th, 2015, 06:19 AM

Pm sent

learn-to-live-again · August 26th, 2015, 08:08 PM

Do you still have the left side rearset/footrest or the shift lever or the rod that attaches to the shifter?

garth285 · August 27th, 2015, 05:01 AM

Quote:

Originally Posted by learn-to-live-again

Do you still have the left side rearset/footrest or the shift lever or the rod that attaches to the shifter?

PM me an offer, cheapest one I saw on ebay was about 100???

May 18th, 2015, 11:17 AM	#130
bkbaseballa16 ninjette.org member Name: Nelson Location: West Palm Beach, FL Join Date: Dec 2014 Motorcycle(s): Ninja 300 Posts: 21	Front Wheel? Do you still have the front wheel? I only need the rim. I'm local in West Palm.

May 25th, 2015, 09:14 AM	#131
DmbShn41 Wannabe Reborn Name: Unregistered Location: Cincy Ohio Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302	Still have the rear fairings? I know you said paint wasn't the greatest but I plan on repainting, as long as tabs were all good. Can you quote shipping to 45244? __________________________________________________ " If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "

June 29th, 2015, 02:12 PM	#140
xxmeleemagicxx ninjette.org newbie Name: Anthony Location: Raleigh Join Date: Jun 2015 Motorcycle(s): 250r Ninja 2009 Posts: 9	Gas cap Do you have the gas cap available?

August 13th, 2015, 03:56 AM	#149
colombianodny Rickninja250 Name: ricardo Location: New york Join Date: Aug 2015 Motorcycle(s): 2009 kawasaki ninja 250 Posts: 3	headlight how is the headlight? and if in good condition how much?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting out 1988 Engine	Finesse	Motorcycle-related	4	May 15th, 2014 12:06 PM
Parting Out 1988 Ninja 250	Finesse	Motorcycle-related	19	April 17th, 2014 09:12 PM
parting 2007 ex250	kycycles	Motorcycle-related	26	June 29th, 2013 07:25 AM
yeah had my first parting yesterday	paulforaname	!%@*#$%!)@#&!%@ I crashed!	7	October 26th, 2011 04:09 AM
Parting out an 08 Plasma Blue...	dubojr1	General Motorcycling Discussion	6	September 30th, 2010 05:17 AM

April 30th, 2015, 09:55 AM	#122
Carnitas ninjette.org newbie Name: Joe Location: Portland Join Date: Aug 2014 Motorcycle(s): 2009 Ninja 250R Posts: 2	Do the side fairings mount up securely? How much shipped to 97210?

May 5th, 2015, 08:14 PM	#123
Hasersys ninjette.org member Name: Hasersys Location: Florida Join Date: Dec 2014 Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750 Posts: 70	What is left of the front end an rear end, I am in vero. I need forks, triples, front and rear wheel, also some small parts here an there.

May 6th, 2015, 09:41 AM	#125
Hasersys ninjette.org member Name: Hasersys Location: Florida Join Date: Dec 2014 Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750 Posts: 70	Far left spacer for rear wheel. Also the bolt that holds the brake guide braket off the swing arm. Probably alot more than I can think of right now. If you ever run across another bike your parting out send me a msg. I am right down the road. Converting pregen to newgen front end an rear end.

May 7th, 2015, 08:42 PM	#126
Joekuh NooB. Name: Joekuh Location: SoCal Join Date: Apr 2013 Motorcycle(s): What's that? Posts: 13	Anything left of the rear wiring harness?

May 9th, 2015, 02:03 PM	#129
Hasersys ninjette.org member Name: Hasersys Location: Florida Join Date: Dec 2014 Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750 Posts: 70	I am very interested in seeing more of his turbo 250.

June 5th, 2015, 06:19 PM	#133
rjizzle36 Guest Posts: n/a	I need a shifter if you still have it

June 6th, 2015, 09:49 PM	#138
oblivion007 "scandal!" Name: Adan Location: Somewhere Join Date: May 2011 Motorcycle(s): 2011 250R(Crashed 2/26/2014), 09 ER6n Posts: 660	Do you still have the rear fender? I thnk you had listed it with two pictures under battery tray. Also that piece i asked about before, the upper cowling frame bit?

June 29th, 2015, 02:40 PM	#142
JHP_Goose ninjette.org newbie Name: John Location: Canada Join Date: Jun 2015 Motorcycle(s): Ninja 250 2009 Posts: 1	Hi ! Do you still have a foot brake lever ?

June 29th, 2015, 03:24 PM	#144
psykown ninjette.org member Name: Joe Location: Lancaster CA Join Date: Dec 2013 Motorcycle(s): 2007 Ninja 250 "sold" 2014 ninja 300 "Gold" 2000 DRZ400S (Sold the POS) K7 GSXR600 (Also POS...see a pattern? Posts: 207	Hey Garth do you know if the front turnsignals fit an 07? If they do I can pick them up right away. I am in Daytona.

July 4th, 2015, 01:03 PM	#145
champofgames ninjette.org member Name: Allen Location: Charlotte, NC Join Date: Oct 2014 Motorcycle(s): '08 Ninja 250 Posts: 10	Hey! I was wondering if you still had the rear brake pedal bracket: And also the rear passenger bracket?

July 4th, 2015, 01:05 PM	#146
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	I know I have the driver rearset but I'll check on a passenger one in a minute. I will pm you back shortly

July 4th, 2015, 01:07 PM	#147
champofgames ninjette.org member Name: Allen Location: Charlotte, NC Join Date: Oct 2014 Motorcycle(s): '08 Ninja 250 Posts: 10	Alright, thanks man! Those are the only two parts that I need to get back on riding! Haha.

July 20th, 2015, 03:28 PM	#148
WolFeYeZ ninjette.org member Name: Brad Location: Denver Join Date: Jul 2015 Motorcycle(s): 09 Ninja 250, 05 R6, 06 R6 Race Posts: 35	Im looking for a front fairing stay for 08-current ninja 250. Got one?

August 13th, 2015, 03:58 AM	#150
colombianodny Rickninja250 Name: ricardo Location: New york Join Date: Aug 2015 Motorcycle(s): 2009 kawasaki ninja 250 Posts: 3	hey how is the headlight? i need the entire assembly and how much?

August 13th, 2015, 08:38 AM	#151
cookiebug79 n00b with the b00bs Name: Jen Location: Southern California Join Date: Jan 2013 Motorcycle(s): 2007 EX250, 2008 EX250, 2001 ZR-7S, 2010 ZX-6R Posts: 470	If the OP doesn't have a headlight, I've got this one. There's a big scratch on the front, but other than that it should be functional:

August 13th, 2015, 09:44 AM	#153
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	I dont have a headlight sorry.

August 13th, 2015, 01:53 PM	#155
Hoons54 ninjette.org member Name: Jung Location: Sacramento Join Date: Jul 2014 Motorcycle(s): 09 Ninja 250r Posts: 42	Do you have front left blinker and driver seat?

August 14th, 2015, 05:57 AM	#157
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	Parts Still Available: Frame Swingarm suspension knuckle rear axle battery tray radiator wiring harness coils front fairing stay lock set airbox engine I know have some other stuff and will update later.

August 14th, 2015, 06:19 AM	#158
feernando ninjette.org member Name: fernando Location: tacoma Join Date: Jul 2015 Motorcycle(s): ninja 300 ninja 250 project Posts: 35	Pm sent

August 26th, 2015, 08:08 PM	#159
learn-to-live-again ninjette.org newbie Name: JJ Location: Missouri Join Date: Aug 2015 Motorcycle(s): Ninja 300 Posts: 2	Do you still have the left side rearset/footrest or the shift lever or the rod that attaches to the shifter?