December 5th, 2012, 04:28 AM | #1 |
ninjette.org newbie
Name: Jordan
Location: Australia
Join Date: Nov 2012 Motorcycle(s): 2012 Ninja 250 Posts: 2
|
Ninja 250 FE Wiring (LP Light)
I've never been a DIY person, so a bad mistake on my half purchasing a cheap fender eliminator kit that lacks instructions. This wiring business is all new to me - so be nice.
After a tedious time dismantling the fender, I was was left wondering how to connect up the new license plate light and rear indicators. Unfortunately none of the wires came with connectors - so any ideas how to connect up the new license plate light (don't worry about the indicators for now)? Here's the new fender and the wires (LP wire is the long black one): http://i50.tinypic.com/dpa2gy.jpg Where it needs to connect to (female): http://i45.tinypic.com/2zsbtas.jpg OEM license plate wire (male): http://i45.tinypic.com/fyn7nm.jpg I've tried just plugging them directly into the female connector (2nd pic) and the lights work - but obviously it won't hold. Bit confused on what exactly I need to do (cut one of the wires + solder? buy new connector? from where?) Any help greatly appreciated |
|
December 5th, 2012, 04:35 AM | #2 |
ninjette.org guru
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012 Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really) Posts: 355
|
I personally would fit the wires on you FE kit with oem style connectors.
There is a thread on here of where to get them. your second option is to cut the original connectors off and resolder edit here is the link Eastern Beaver
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider Last futzed with by Alex; December 5th, 2012 at 07:49 AM. Reason: link fixed |
|
December 5th, 2012, 04:46 AM | #3 | |
ninjette.org newbie
Name: Jordan
Location: Australia
Join Date: Nov 2012 Motorcycle(s): 2012 Ninja 250 Posts: 2
|
Quote:
I really wanted to avoid spending more money, but since I don't own a soldering iron looks like my only option is to buy some OEM connectors (min. shipping from that guy is $20). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wiring for flush mount front turn signals for 07 ninja 250 | james250ninja | 1986 - 2007 Ninja 250R Tech Talk | 2 | October 4th, 2013 01:35 PM |
2008-2012 Ninja 250 OEM Taillight with Bulb and wiring | ajcadoo | Motorcycle-related | 0 | June 13th, 2013 05:52 PM |
early 90's 250 Ninja engine and wiring | ecannon1 | Motorcycle-related | 0 | September 22nd, 2010 12:11 AM |
WTB: Ninja 250 turn signal wiring | CGNY87 | Items Wanted | 10 | January 22nd, 2010 01:32 AM |
|
|