June 1st, 2017, 10:41 AM | #1 |
ninjette.org newbie
Name: Travis
Location: Goldsboro, NC
Join Date: Mar 2017 Motorcycle(s): '08 Ninja 250J Posts: 3
|
250J carb ???
My 08 is having some carb problems, I believe there is a peice of sand clogging up one of the jets. I'll be riding and it'll choke and sputter out like it's out of gas, so I drop 2 or 3 gears and pop the clutch and she will come back alive from sloshing of the gas. My question being, I'm trying to find a jet kit, but all I see is jet kits for the 250R, can I use this jet kit or are they different carbs? Any suggestions on where to get a kit?
|
|
June 1st, 2017, 11:11 AM | #2 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
I suggest you first six the original problem, before diving into a jet kit.
Sounds like a fuel delivery issue, could be vapor locking, bad petcock, clogged fuel filter, etc.... Get it running right first before you start messing with stuff. Why do you think you need a jet kit? Any mods to the bike?
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
1 out of 1 members found this post helpful. |
June 1st, 2017, 11:24 AM | #3 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
Have you looked inside the tank for rust?
A significant amount of condensation in the tank could also do what you described. I agree with Ghostt. Don't do any carb/jetting mods right now, just solve the major problem before changing things. |
|
June 1st, 2017, 01:44 PM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Sounds like the small pilot circuits are clogged. These have very small passages that can stop flowing at the slightest hint of lint!!! Really should take out the carbs and inspect. If you can't clear it up with spray-cleaners, send it off to Ducatiman to get a real good cleaning. And rebuild if necessary.
|
|
June 1st, 2017, 06:13 PM | #6 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
Doesn't the 250 have the same tank vent issue as the 500?
Could that be at play here?
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
June 1st, 2017, 07:56 PM | #7 |
.
Name: .
Location: .
Join Date: Aug 2014 Motorcycle(s): . Posts: A lot.
MOTM - July '15
|
Also:
EX250R= "Ninja 250" EX250F= "Pregen Ninja 250" EX250J= "Newgen Ninja 250" Weird, right? |
|
June 1st, 2017, 11:02 PM | #8 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
I have a write-up on the cap vent fix, if needed. but it's for the PreGen, but I'm sure it might apply here re as well.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Motion Pro Syncpro Carb Tuner (Carb Sync) $60 Shipped | menikmati | Motorcycle-related | 4 | April 8th, 2020 12:39 AM |
Want EX300A/250J forks or tubes;Have complete 250F triple w/'08+ brake/wheel hardware | CZroe | Items Wanted | 6 | January 26th, 2013 08:21 PM |
2008 250J shock installed | JeffM | 1986 - 2007 Ninja 250R Farkles | 27 | July 20th, 2011 09:30 AM |
|
|