July 28th, 2011, 10:29 PM | #1 |
ninjette.org member
Name: Austin
Location: San Diego
Join Date: Jan 2011 Motorcycle(s): 2009 Ninja 250r Posts: 72
|
Having a problem mounting Area P exhaust to passenger peg
So today i installed my Area P exhaust, i'm a mechanic noob but it wasn't too bad. I'm stumped though, i'm finding it's difficult, very difficult to mount the exhaust to the peg.
Uploaded with ImageShack.us I can't for the life of my wrench the bolt through. Should I take the washer out? Directions say to use the area p washer provided, but I never remember coming across one. |
|
July 28th, 2011, 10:35 PM | #2 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Make sure the bolts in straight. If its not in the threading correctly it could be very hard to tighten and mess up the threads.
__________________________________________________
|
|
July 28th, 2011, 10:55 PM | #3 |
ninjette.org member
Name: Austin
Location: San Diego
Join Date: Jan 2011 Motorcycle(s): 2009 Ninja 250r Posts: 72
|
I'm not necessarily having trouble tightening it, only half of the bolt has threading on it, and the half closest to the head is naked. So it'll get it in, and it'll just come out
|
|
July 28th, 2011, 11:10 PM | #4 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
It was a pain in the ass for mine too. The only way we got around it was to mount the clap off the bike first so you can get the shape easier
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
July 28th, 2011, 11:28 PM | #5 |
ninjette.org member
Name: Austin
Location: San Diego
Join Date: Jan 2011 Motorcycle(s): 2009 Ninja 250r Posts: 72
|
Do you happen to have a pic of what the spacer looks like that Area P provides? I either didn't receive it, or its somewhere where I put all the nuts and bolts
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Passenger peg delete | jwollam | 2008 - 2012 Ninja 250R Farkles | 7 | November 13th, 2012 08:08 PM |
Area P High Mount Race Exhaust Passenger Pegs | Trailerboy531 | 2008 - 2012 Ninja 250R Tech Talk | 1 | March 2nd, 2012 08:12 PM |
Removing Passenger Peg | saxnbass | 2008 - 2012 Ninja 250R Farkles | 6 | January 3rd, 2012 06:03 PM |
passenger peg / exhaust hanger bent from the fall | wayanlam | 2008 - 2012 Ninja 250R Tech Talk | 3 | April 22nd, 2011 10:08 AM |
What is the piece that covers left passenger peg mount point like the exhaust hanger? | CZroe | 2008 - 2012 Ninja 250R Farkles | 4 | October 6th, 2009 04:25 PM |
|
|