September 13th, 2012, 03:01 AM | #1 |
ninjette.org member
Name: Alexandre
Location: Montreal
Join Date: Jul 2009 Motorcycle(s): Ninja 250r 09 SE Posts: 172
|
aftermarket front master cylinder??
is there a direct replacement for the front master cylinder?
i'm looking for a better one than the stock one. |
|
September 13th, 2012, 05:00 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
What's wrong with the stock one? The lil ninjette has more braking capability than it needs already.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
November 19th, 2012, 06:45 PM | #3 | |
ninjette.org member
Name: Jim
Location: Schofield Barracks, HI
Join Date: Jun 2012 Motorcycle(s): 2008 Ninja 250, 2009 Concours 14 Posts: 130
|
Quote:
I've seen a couple of threads around about upgrades, I was able to get a 2002 Honda Superhawk MC to fit without significant heartburn. Pretty much any MC from a bike with dual-disc front brakes will be a huge upgrade in stopping power since it will have been designed to push enough fluid to activate 2 calipers, usually larger than the one on the Ninjette. Since brake fluid is incompressible, this equates to much higher pressure in the system with much less lever pull. You just need one that will clear the right-hand grip group (throttle housing, killswitch, etc) and has the same banjo bolt thread size / location as the stocker and you're in business.
__________________________________________________
Igitur qui desiderat pacem, praeparat bellum... |
|
|
November 19th, 2012, 08:50 PM | #4 |
ninjette.org member
Name: Kurt
Location: Knoxville
Join Date: Oct 2012 Motorcycle(s): '04 R1 and '08 Ninja 250 Posts: 222
|
try putting on Stainless Braided lines and some Vesrah pads. That set up will not disappoint you.
__________________________________________________
Check out this Ninja 250 roadracing youth---> TheDraik77 <--- My son |
|
November 25th, 2012, 01:03 PM | #5 |
ninjette.org member
Name: Drew
Location: Midwest
Join Date: Nov 2012 Motorcycle(s): Many Posts: 68
|
My buddies has an r6 master made by brembo 16x18 works pretty well. The stocker on my Husqvarna 510 sm is wicked for a single disk but also very expensive oem replacement.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Aftermarket Master Cylinder | krolinked | Ninjettes At Speed | 11 | October 15th, 2014 07:12 AM |
Front brake master cylinder | ninjagaiden09 | 2008 - 2012 Ninja 250R Tech Talk | 7 | April 22nd, 2014 08:51 AM |
Front Master Cylinder Size | FvnnyL3tt3r1ng | 1986 - 2007 Ninja 250R Tech Talk | 3 | August 14th, 2013 02:38 PM |
front brake issues. master cylinder? | Solunatic | 1986 - 2007 Ninja 250R Tech Talk | 13 | June 25th, 2012 11:34 AM |
front master cylinder wanted | 03slime250 | Items Wanted | 4 | July 14th, 2011 09:56 AM |
|
|