Ecotrons map

swarfman64 · January 14th, 2015, 11:42 PM

Hello, I was wondering if anyone had a map for a turbocharged/ Ecotrons injected ninja, ideally one that is known to work with the standard fuel regulator. And going to the full 2.5 bar too.
I have a project at a stand still

.
Any help appreciated

Somchai · January 15th, 2015, 02:16 AM

Andrew I don't know the Ecotrons system, Matt for sure can tell you how to do it, but normally you go and calculate the mass of air your engine is sucking in per hour.
The formula is: 60 * cc of each cylinder (in liter) * cylinders * rpm * grade of delivery (turbo = 1.2 - 1.6) / 2
i.e. for your bike: 60 * 0.125 * 2 * 12000 * 1.4 / 2 = 126000 liter / hour
All those values are calculated for full open throttle.
Good luck

swarfman64 · January 15th, 2015, 06:09 AM

Thanks for the info', I'm waiting on some help from Matt. I have some files but are having some minor issues loading them. I initially was shooting for 8psi boost, but now I think I'm going to push a lot further which means a rising rate reg and possibly bigger injectors.
I was also interested to know if there is actually another Ecotrons boosted ninja that is sorted tune wise, I'm thinking there may not be yet.

January 14th, 2015, 11:42 PM	#1
swarfman64 Master modder Name: Andrew Location: Australia Join Date: Jan 2014 Motorcycle(s): TURBO gpx250 99 CB250/500rs Sherco290 Trials Indian 1911big base (replica) Posts: 138	Ecotrons map Hello, I was wondering if anyone had a map for a turbocharged/ Ecotrons injected ninja, ideally one that is known to work with the standard fuel regulator. And going to the full 2.5 bar too. I have a project at a stand still. Any help appreciated __________________________________________________ [B]Come and see my turbo ninja build, dyno build and other stuff at http://swarfman64.blogspot.com.au/20...rtia-dyno.html

January 15th, 2015, 06:09 AM	#3
swarfman64 Master modder Name: Andrew Location: Australia Join Date: Jan 2014 Motorcycle(s): TURBO gpx250 99 CB250/500rs Sherco290 Trials Indian 1911big base (replica) Posts: 138	Thanks for the info', I'm waiting on some help from Matt. I have some files but are having some minor issues loading them. I initially was shooting for 8psi boost, but now I think I'm going to push a lot further which means a rising rate reg and possibly bigger injectors. I was also interested to know if there is actually another Ecotrons boosted ninja that is sorted tune wise, I'm thinking there may not be yet. __________________________________________________ [B]Come and see my turbo ninja build, dyno build and other stuff at http://swarfman64.blogspot.com.au/20...rtia-dyno.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ecotrons Install Thread	Jiggles	2008 - 2012 Ninja 250R Tech Talk	1732	May 31st, 2022 02:17 PM
Ecotrons petcock option	swarfman64	1986 - 2007 Ninja 250R Tech Talk	2	January 10th, 2015 03:26 PM
WTB:Ecotrons petcock	crimsondragon	Items Wanted	2	September 21st, 2014 06:54 AM
Ecotrons kit	garth285	Items Wanted	0	June 17th, 2014 05:09 PM
Ecotrons and Koso Question	msebastian	2008 - 2012 Ninja 250R Tech Talk	29	July 19th, 2012 05:07 PM

January 15th, 2015, 02:16 AM	#2
Somchai Freedom for Germany Location: This World Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.	Andrew I don't know the Ecotrons system, Matt for sure can tell you how to do it, but normally you go and calculate the mass of air your engine is sucking in per hour. The formula is: *60 cc of each cylinder (in liter) * cylinders * rpm * grade of delivery (turbo = 1.2 - 1.6) / 2** i.e. for your bike: 60 * 0.125 * 2 * 12000 * 1.4 / 2 = 126000 liter / hour All those values are calculated for full open throttle. Good luck