My LED strip turn signal lights ....

tc3jg · May 28th, 2009, 01:37 AM

No extra resistors needed.......
used stock lights for that

they blink in unison with the fronts

hzrnbgy · May 28th, 2009, 03:11 AM

very nice. i wanted the same but i just dont have the guts to drill into my fairings

tc3jg · May 28th, 2009, 02:16 PM

Hey thanks alot yes I was a little apprehensive at first to but the hole is only about 2 to 2.5 mm so its not even that noticeable if I removed the lights. dont let that stop you from doing the mod as its well worth it I havent had any trouble with the police either.

dmonaco05 · May 28th, 2009, 02:46 PM

idk y cops would hassle u from the vid its more noticeable than the stock. lights

tc3jg · May 28th, 2009, 03:56 PM

Quote:

Originally Posted by dmonaco05

idk y cops would hassle u from the vid its more noticeable than the stock. lights

yeah those are my thoughts as well but some say I may get some FLack because they are not DOT approved. but cross our fingers

tylerdurden119 · May 28th, 2009, 04:27 PM

SICK....very sharp. Looks reaaaally good, bet they look amazing at night.

DsmRacing · May 28th, 2009, 04:53 PM

I have yet to rip the rear end of the bike apart, preparing to move right now. I really like the look of the license plate look. Did you just drill some holes? How is it attached.

tc3jg · May 28th, 2009, 05:49 PM

Hey thanks alot Tyler ... yeah at night they are pretty ridiculous cant say you didnt see me they kind of light up the ground to the right side of the bike as well or the left if that signal is on.

to DSMracing- Yes I just drilled some holes and placed two L brackets behind the plate but there is a strip of metal behind the plate that the brackets go into so they dont have to go into the plate itself.

few more pictures

Seth · May 28th, 2009, 11:33 PM

I'm guessing they are similar to the ones i got of ebay, i do have the problem that they blink faster than stock but thats because i have aftermarket ones at the front also.

The ebay seller supplied me with an Electronic LED relay but it's 3 pins compared to the U shaped one the Ninja has, with only two pins.

If anyone has applied a 3 pin flasher relay please let me know how to do it.

Link to original page on YouTube.

Link to original page on YouTube.

I didn't drill anything but slided the wires in through a small gap left by the fender eliminator kit.

akcalhoun · November 16th, 2012, 09:45 AM

so u just spliced them in? also where did u buy them they look nice

himynameisjoe · November 16th, 2012, 12:35 PM

Quote:

Originally Posted by akcalhoun

so u just spliced them in? also where did u buy them they look nice

I feel pretty confident in saying these guys aren't going to be commenting back...

akcalhoun · November 16th, 2012, 12:47 PM

Quote:

Originally Posted by himynameisjoe

I feel pretty confident in saying these guys aren't going to be commenting back...

lol opps didnt notice the date

himynameisjoe · November 16th, 2012, 12:48 PM

Quote:

Originally Posted by akcalhoun

lol opps didnt notice the date

lolol yeah. That being said, these are pretty slick! I dig em'!

cuz · November 16th, 2012, 01:01 PM

Quote:

Originally Posted by akcalhoun

so u just spliced them in? also where did u buy them they look nice

yes
http://www.ebay.com/itm/SUPER-BRIGHT...item43aa8d7ba1

cuz · November 16th, 2012, 01:08 PM

Just noted that it for signal lights mine r just a extra brake light(s)

Mowgli · November 20th, 2012, 09:32 AM

Do you have night time pics of those?

cuz · November 23rd, 2012, 09:43 PM

@Mowgli

BRAKE!!!

Kstorm21 · November 23rd, 2012, 11:51 PM

Didn't someone do something similar but as front turn signals?

LNasty · January 3rd, 2013, 01:43 PM

Can you show more on how you wired those in for the brake lights?

May 28th, 2009, 01:37 AM	#1
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	My LED strip turn signal lights .... No extra resistors needed....... used stock lights for that they blink in unison with the fronts

November 16th, 2012, 01:08 PM	#15
cuz cuz Name: Israel Location: Houston (me) Galveston Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.	Just noted that it for signal lights mine r just a extra brake light(s) __________________________________________________ THE GOOD LIFE

November 23rd, 2012, 09:43 PM	#17
cuz cuz Name: Israel Location: Houston (me) Galveston Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.	:0 @Mowgli BRAKE!!! __________________________________________________ THE GOOD LIFE

November 23rd, 2012, 11:51 PM	#18
Kstorm21 ninjette.org sage Name: Katherine Location: Schofield Barracks, HI Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767	Didn't someone do something similar but as front turn signals? __________________________________________________

May 28th, 2009, 03:11 AM	#2
hzrnbgy ninjette.org member Name: HzrnBgy Location: Hawaii Join Date: Apr 2009 Motorcycle(s): 2009 Black Ninja 250R, 2004 Yellow Ninja 250R Posts: 111	very nice. i wanted the same but i just dont have the guts to drill into my fairings

May 28th, 2009, 02:16 PM	#3
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	Hey thanks alot yes I was a little apprehensive at first to but the hole is only about 2 to 2.5 mm so its not even that noticeable if I removed the lights. dont let that stop you from doing the mod as its well worth it I havent had any trouble with the police either.

May 28th, 2009, 02:46 PM	#4
dmonaco05 ninjette.org member Name: Dom Location: oswego ny Join Date: Apr 2009 Motorcycle(s): 2009 ninja 250r Posts: 46	idk y cops would hassle u from the vid its more noticeable than the stock. lights

May 28th, 2009, 04:27 PM	#6
tylerdurden119 ninjette.org member Name: Kristopher Location: Hamilton, Ontario, Canada Join Date: May 2009 Motorcycle(s): BLACK 09 250r, burnt orange 09 zx 6r Posts: 25	SICK....very sharp. Looks reaaaally good, bet they look amazing at night.

May 28th, 2009, 04:53 PM	#7
DsmRacing ninjette.org member Name: Chad Location: Valrico, FL Join Date: Apr 2009 Motorcycle(s): 2008 Green 250R and 06 636 maybe? Posts: 16	I have yet to rip the rear end of the bike apart, preparing to move right now. I really like the look of the license plate look. Did you just drill some holes? How is it attached.

May 28th, 2009, 05:49 PM	#8
tc3jg ninjette.org member Name: Justin Location: illinois Join Date: May 2009 Motorcycle(s): 08 ninja 250r Posts: 158	Hey thanks alot Tyler ... yeah at night they are pretty ridiculous cant say you didnt see me they kind of light up the ground to the right side of the bike as well or the left if that signal is on. to DSMracing- Yes I just drilled some holes and placed two L brackets behind the plate but there is a strip of metal behind the plate that the brackets go into so they dont have to go into the plate itself. few more pictures

May 28th, 2009, 11:33 PM	#9
Seth Akira Name: Bruno Location: Sydney Join Date: Feb 2009 Motorcycle(s): Ninja 250R Posts: 13	I'm guessing they are similar to the ones i got of ebay, i do have the problem that they blink faster than stock but thats because i have aftermarket ones at the front also. The ebay seller supplied me with an Electronic LED relay but it's 3 pins compared to the U shaped one the Ninja has, with only two pins. If anyone has applied a 3 pin flasher relay please let me know how to do it. Link to original page on YouTube. Link to original page on YouTube. I didn't drill anything but slided the wires in through a small gap left by the fender eliminator kit.

November 16th, 2012, 09:45 AM	#10
akcalhoun ninjette.org member Name: aaron Location: east texas Join Date: Jul 2012 Motorcycle(s): 2013 honda shadow phantom Posts: 170	so u just spliced them in? also where did u buy them they look nice

November 20th, 2012, 09:32 AM	#16
Mowgli ninjette.org member Name: Michael Location: San Antonio Join Date: Jul 2012 Motorcycle(s): None yet Posts: 29	Do you have night time pics of those?

January 3rd, 2013, 01:43 PM	#19
LNasty Daily Jap rider Name: Lance Location: La Porte Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.	Can you show more on how you wired those in for the brake lights?