May 18th, 2019, 09:39 PM | #1 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
250r motor harness exhaust carbs cluster complete
I want to 300 swap my 250R to motivate me to keep it but my need a home for this power plant first.
2008 engine 13145 miles Good leakdown and compression Fresh valve adjustment Area P header custom race exhaust (underbelly exit) New uni pods Carbs are at ducatiman now being refreshed ($140 alone) Various jets and pilots Manual cam chain tensioner Crankcase breather and valve cover blockoff Coil on plug swapped 15T 520 sprocket $400 obo Will come with gauge cluster, entire bike wire harness (including COP harness), fuel petcock level sender and lines...literally everything you need to sit this motor on a bench and run it |
|
May 18th, 2019, 09:41 PM | #2 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Pics
|
|
May 19th, 2019, 05:13 AM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Darn, that's great deal. I'd take it in a second! Catch is, how much would that cost to ship to CA?
I guess we can get some quotes for 120-lb box/pallet from uShip or Yellow. BusFreighter.com is another good shipper, i don't mind goin down to bus-station to pick it up |
|
May 19th, 2019, 05:40 AM | #4 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
While a local deal is preferable, I’d even be willing to drive a considerable distance to meet up, I’m not opposed to shipping. How serious we talking spend my whole day getting materials to make a box and get a couple quotes or just casually ballpark a price?
|
|
May 19th, 2019, 03:33 PM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Let me get couple quotes first.
|
|
June 6th, 2019, 03:37 PM | #6 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Motor is back in my bike and now running, beginning the tuning process (pilots and mains). As it sits, it idles well and pulls through the powerband without issue, it just needs to be optimized.
Package will now come with a high mount race exhaust as well as the underbelly exhaust (I had to make something to clear the new bellypan). Videos of bike running/driving upon request to serious buyers. Buyer may also come see it run in person. Bike harness has been modified for koso rx2n cluster (I did it plug and play). The cluster will be included. The stock cluster could still be used with about a half hour of repinning connectors. |
|