ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old March 7th, 2019, 12:20 PM   #1
SlowNsteady
ninjette.org member
 
Name: Mike
Location: CA
Join Date: Aug 2017

Motorcycle(s): 2009 250r

Posts: 42
'09 Ninja 250r for sale - unfinished and cheap

Hi all,

I had the best intentions when I started this project, but as most of us have experienced, this project hit a wall and I now need to move on.

I'm moving soon from a house with a garage to a condo without any garage. I need the bike and all the great parts to find a new home - one that will actually finish this bike!

$300 gets you the following:

2009 Ninja 250r with clean/current California title

-Pireli tires
-Motion Pro quick turn throttle tube
-Woodcraft Clipons
-eBay rearsets
-OEM tail fairings (eBay)
-eBay levers
-eBay fork preload adjusters
-OEM seat (eBay)
-eBay rear cowl
-Apex stainless front brake line
-gas tank Stomp Grips
-PMC pair removal plate
-blue LEDs for instrument cluster
-Racetech fork springs
-Racetech gold valves
-eBay double bobble windscreen
-chain/sprockets

(please refer to this thread: https://www.ninjette.org/forums/showthread.php?t=301148 )

Since the last post in the build thread, I pull the fairings back off to keep pushing forward. I installed the rearsets and mocked the clipons. I started wiring the rear signals and tailight, mounted the rear tire, new chain and sprockets...

I'm hoping someone from this forum (a Ninja enthusiast) will pick this up. If I don't get any interest here I'll be posting it for sale elsewhere relatively soon.

Please contact me via PM with your email address if interested. And please only reply if you know you're 100% going to buy the bike. If you're local (SF Bay Area) I may be able to deliver everything to you.

Thanks,

Mike
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate
SlowNsteady is offline   Reply With Quote




Old March 7th, 2019, 01:50 PM   #2
CynicalC
ninjette.org certified postwhore
 
CynicalC's Avatar
 
Name: Colin
Location: Bay Area
Join Date: Feb 2011

Motorcycle(s): '96 EX250

Posts: A lot.
I'm in SF. Just sent you a PM.
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è.
CynicalC is offline   Reply With Quote


Old March 7th, 2019, 02:21 PM   #3
SlowNsteady
ninjette.org member
 
Name: Mike
Location: CA
Join Date: Aug 2017

Motorcycle(s): 2009 250r

Posts: 42
Thanks Colin. PMs replied.

To answer a couple questions: no shipping (I'm selling it cheap in hopes of a fast/easy sale to a local enthusiast), and it was running but the idle was hanging. The carbs need more adjustment to eliminate the rev hang. I would have zero hesitation to ride this bike on the street once all the provided parts are installed and the carbs are sorted.

Thanks

Mike
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate
SlowNsteady is offline   Reply With Quote


Old March 7th, 2019, 07:20 PM   #4
Z1R rider
ninjette.org certified postwhore
 
Z1R rider's Avatar
 
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014

Motorcycle(s): 1978 Z1R, 1999 EX250

Posts: A lot.
MOTY - 2018, MOTM - Oct '16
Wish I was about 1500 miles closer, anyway good luck!
__________________________________________________
top of the day to ya Unregistered
Z1R rider is offline   Reply With Quote


Old March 8th, 2019, 04:13 PM   #5
SlowNsteady
ninjette.org member
 
Name: Mike
Location: CA
Join Date: Aug 2017

Motorcycle(s): 2009 250r

Posts: 42
Sold! Thanks Colin, enjoy
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate
SlowNsteady is offline   Reply With Quote


Old March 8th, 2019, 07:19 PM   #6
CynicalC
ninjette.org certified postwhore
 
CynicalC's Avatar
 
Name: Colin
Location: Bay Area
Join Date: Feb 2011

Motorcycle(s): '96 EX250

Posts: A lot.
Quote:
Originally Posted by SlowNsteady View Post
Sold! Thanks Colin, enjoy
I'll try, but my wife is already eyeballing it for herself.
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è.
CynicalC is offline   Reply With Quote


Old March 8th, 2019, 08:50 PM   #7
Z1R rider
ninjette.org certified postwhore
 
Z1R rider's Avatar
 
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014

Motorcycle(s): 1978 Z1R, 1999 EX250

Posts: A lot.
MOTY - 2018, MOTM - Oct '16
Looks like it's going to a good home!
__________________________________________________
top of the day to ya Unregistered
Z1R rider is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Tons of AGV Sport Gloves For Sale CHEAP outasight20 Gear-related 18 July 23rd, 2014 06:38 AM
Bell Revolver on Sale, cheap Heed Gear-related 34 August 7th, 2012 06:37 PM
eBay : - Cheap teknic chicane suit for sale psych0hans Gear-related 0 June 18th, 2012 10:53 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 07:45 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.