January 29th, 2016, 09:43 AM | #1 |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
Who Says Tapered Steering Head Bearings Are Best?
I've heard the subject mentioned one time before, but seeing this picture today reminded me that different isn't necessarily better. There is a small group of riders who stick with ball bearings in their steering head because they say they provide a better feel. This is a picture of the lower triple clamp from Valentino Rossi's 2013 MotoGP bike:
|
1 out of 1 members found this post helpful. |
January 29th, 2016, 09:52 AM | #2 | |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
Quote:
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
|
|
January 29th, 2016, 10:26 AM | #3 |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
How did you get Rossi's lower triple clamp on your bench?
__________________________________________________
If everything seems under control; you're just not going fast enough! |
|
January 29th, 2016, 11:21 AM | #5 |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
|
|
January 29th, 2016, 11:26 AM | #6 |
ninjette.org member
Name: Ricky
Location: Modesto,CA
Join Date: Aug 2015 Motorcycle(s): 2000 EX250 Posts: 31
|
Define best.
Best for what? longevity? Feedback/ Feel? |
|
January 29th, 2016, 12:21 PM | #7 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
|
|
January 29th, 2016, 12:24 PM | #8 | |
ninjette.org member
Name: Ricky
Location: Modesto,CA
Join Date: Aug 2015 Motorcycle(s): 2000 EX250 Posts: 31
|
Quote:
Best is different for different type of riding. So I would say tapered rollers vs balls is a matter of end user preference. I have ball bearings in my track bikes and I switch to tapered rollers on all my street bikes when the original wears out |
|
|
January 29th, 2016, 01:14 PM | #9 |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
That's pretty much my point. It depends on what you're after. Though a cursory look on the internet would lead you to believe that ball type steering head bearings have no redeeming value and were invented by the Devil himself.
|
|
January 29th, 2016, 02:02 PM | #10 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
|
|
January 29th, 2016, 04:45 PM | #11 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Those are also probably fresh balls every race, likely a proprietary bearing race design, proprietary materials, etc etc.
|
|
January 29th, 2016, 05:00 PM | #12 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
They have bigger balls than regular street & race riders!
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
1 out of 1 members found this post helpful. |
January 29th, 2016, 05:12 PM | #13 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I prefer free balls over caged balls.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
January 29th, 2016, 05:24 PM | #14 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Free range balls! They're happier than caged balls!
|
|
February 7th, 2016, 05:18 AM | #15 |
Down Under
Name: Linkin
Location: Sydney, Australia
Join Date: Jun 2014 Motorcycle(s): Kawasaki ZXR250C Ninja Posts: 296
|
Going commando provides better feel
|
|
February 7th, 2016, 05:54 AM | #16 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I like where this thread is going...
|
|
February 14th, 2016, 04:30 PM | #17 |
ninjette.org member
Name: Fred
Location: Oklahoma
Join Date: Feb 2015 Motorcycle(s): 2012 250r Posts: 41
|
All balls are good lol. All balls makes a tapered bearing set for almost any bike out there. I have run both. Tapered gives you longer intervals on service and last longer but if not set up right you will lose some feedback at the bars.
|
|
February 14th, 2016, 04:48 PM | #18 | |
ninjette.org member
Name: charles
Location: Sugar Hill GA.
Join Date: Feb 2016 Motorcycle(s): many mostly racebikes cbr565 fzr490 ex250ish Posts: 40
|
Quote:
On topic of bearings round balls have lower friction but they dent the race a lot easier in a tumble causing notchy steering. My preference is the taper roller. I find it funny that some racers have a idea that stiff steering dampers are good but the races and bearings are a choice. |
|
|
February 15th, 2016, 06:37 AM | #19 | |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
Quote:
I agree with you about overly stiff steering dampers. I only dial them up enough for them to do their job. For the most part, steering dampers are not a performance item in my opinion. They are for safety and I cannot comprehend why people pay $400.00 plus for something that really has no performance value. That's why I try to use the old NHK dampers whenever possible. They are cheap, adjustable and well-proven. I usually find them for less than $30.00 on ebay. The fun part is getting them to fit because of their relatively short throw. |
|
|
February 15th, 2016, 11:47 PM | #20 |
Vintage Screwball
Name: B
Location: Washington
Join Date: Feb 2016 Motorcycle(s): 2011 Ninja 250, 2008 Ninja 250, 2019 KTM 1290SDR, 2017 FZ10 Posts: A lot.
MOTM - Mar '16
|
I took my Suzuki factory damper, drained it, flushed it and added thicker oil. Works like a champ, never have any headshake no matter what I'm doing.
__________________________________________________
Goin' fast on slow bikes! |
|
February 16th, 2016, 12:19 AM | #21 |
Schönen Tag noch
Name: c
Location: Central Cali
Join Date: Sep 2013 Motorcycle(s): 08 ninja 250 race bike, 02 gixxer 600 telefonica Posts: 184
|
|
|
February 18th, 2016, 09:36 PM | #22 |
ninjette.org member
Name: charles
Location: Sugar Hill GA.
Join Date: Feb 2016 Motorcycle(s): many mostly racebikes cbr565 fzr490 ex250ish Posts: 40
|
Head shake is a direct issue of poor geometry or rider input at wrong time. seen loose head bearings cause a shimmy but speed wobbles are mostly geometry issues. How many times have you seen a bike eject rider only to snap dead straight and keep rolling. Bikes are self correcting...now old gp 500 bikes them be a whole different ballgame...
|
|
February 19th, 2016, 06:37 AM | #23 | |
Old and slow
Name: Lohman
Location: Aiken, S.C.
Join Date: May 2014 Motorcycle(s): Suzuki TL1000R, Honda CBR600F3, Ninja 250 Posts: 889
|
This is where I get my replacement triple tree and wheel bearings.
http://www.allballsracing.com/ I'm going to have to agree with the shorter, but better life. When new, and properly set up, the steering head feels like it's melted butter (budda') Quote:
Jet fighters dance on the aerodynamicaly unstable line. The aircraft wants to turn all the time, the pilot just tell it when, and which direction. The same can be said for high performance bikes. It wants to fall over all the time, you just tell it when and which way. I've seen at least one vid where pilot comes off the bike, and it continues the turn. Most bikes will stand up and go straight when your hands come off the bars. A well set up GP bike is literally balanced on the razors edge.
__________________________________________________
|
|
|
February 21st, 2016, 09:29 AM | #24 |
ninjette.org member
Name: charles
Location: Sugar Hill GA.
Join Date: Feb 2016 Motorcycle(s): many mostly racebikes cbr565 fzr490 ex250ish Posts: 40
|
By poor I should say misaligned. Trail is a rider preference thing some like a short bike while others like a longer trail that gives more feedback. For a reference the KTM 390 is VERY short low 80's vs GSXR600 102 both bikes turn in is very good i.e knee down...the whole knee down thing is a heated topic in itself...But both bikes have a very different feel mid corner out one very stable arc the other you need to maintain a feel on the bars that holds the bike in the arc. The shorter bike seems to travel from one side to the other nice while the longer trail needs more lever to go side to side. Trade offs are ft end feel and stability. Hi speed wobbles are a battle between ft and rear effects caused by misalignments they can be induced by frame flex under power or braking. Bikes are much more than ft forks and rear shock. Yes All Balls are the ones I use as well.
|
|
February 21st, 2016, 12:56 PM | #25 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
That's not Valentino Rossi's garage.
|
|
February 21st, 2016, 01:00 PM | #26 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
I had heard he had groupies
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
|
February 21st, 2016, 01:02 PM | #27 |
Vintage Screwball
Name: B
Location: Washington
Join Date: Feb 2016 Motorcycle(s): 2011 Ninja 250, 2008 Ninja 250, 2019 KTM 1290SDR, 2017 FZ10 Posts: A lot.
MOTM - Mar '16
|
I've always replaced the balls with tapered roller bearings. For me they are smoother, less prone to damage and easier maintenance too.
__________________________________________________
Goin' fast on slow bikes! |
|
February 25th, 2016, 02:33 PM | #28 |
ninjette.org certified postwhore
Name: Paul
Location: UK
Join Date: Apr 2014 Motorcycle(s): Ninja 250, Yamaha RS200 (classic) Posts: A lot.
|
Once you have bought enough used classic bikes with 'straight ahead detented' ball races which you have had to source and replace you will appreciate the benefit of taper rollers.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
steering head bearing race driver | pb3 | 2008 - 2012 Ninja 250R Tech Talk | 3 | October 25th, 2015 02:57 PM |
Steering stem bearings- Grease or no? | MrSavvy | 2008 - 2012 Ninja 250R Tech Talk | 12 | June 10th, 2014 07:06 PM |
[motorcyclistonline] - All Balls Steering Head Bearings | MC Tested | Ninjette Newsbot | Motorcycling News | 0 | April 18th, 2013 01:10 PM |
steering head screw size | randomwalk101 | 2008 - 2012 Ninja 250R Tech Talk | 2 | May 4th, 2009 09:51 AM |
|
|