Would have been a pretty cool bike

subxero · July 11th, 2014, 07:25 AM

Browsing pictures of rz350's I came across this old article

Looks awesome IMO, would have been a kick ass little bike

http://www.motorcycle.com/manufactur...ept-82286.html

sharky nrk · July 11th, 2014, 07:35 AM

would have could have should have ........ BUT .......

broken neck · July 11th, 2014, 09:16 AM

Love the Ninja 250 wheels...

Almost the same as my 2011 SE wheels with the red tape...

kdogg2077 · July 11th, 2014, 01:37 PM

http://www.motorcycle-usa.com/792/18...s-Honduki.aspx

Here's a street 2 stroke for ya, just gotta fork over 11,000 or build one yourself.

subxero · July 11th, 2014, 02:35 PM

thats not bad for a somewhat custom built bike. There are bikes to be had, several in the state alone. I am just in no position to pull the trigger

Ninjinsky · July 11th, 2014, 02:59 PM

I'm hoping one of the big 4 will develop the stepped piston 2 stroke

http://users.breathe.com/prhooper/opads.htm

It is a 2stroke that uses a stepped piston instead of the crankcase so you can use wet sump and a lot less pollution to meet regs.

July 11th, 2014, 07:35 AM	#2
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	would have could have should have ........ BUT ....... __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

July 11th, 2014, 01:37 PM	#4
kdogg2077 ninjette.org sage Name: Alex Location: Ebensburg, PA Join Date: Sep 2013 Motorcycle(s): 2015 Yamaha FZ07, Ninja 250r 2012 Limited Edition (Sold) Posts: 529	http://www.motorcycle-usa.com/792/18...s-Honduki.aspx Here's a street 2 stroke for ya, just gotta fork over 11,000 or build one yourself. __________________________________________________ "Take it easy driving. The life you might save might be mine."

July 11th, 2014, 02:35 PM	#5
subxero dirty boy Name: Joe Location: Johnstown, PA Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot. MOTM - Apr '14	thats not bad for a somewhat custom built bike. There are bikes to be had, several in the state alone. I am just in no position to pull the trigger __________________________________________________ I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
water transfer printing, pretty cool	subxero	Videos	4	April 15th, 2014 02:22 AM
Pretty cool story...	red5	General Motorcycling Discussion	6	November 21st, 2013 09:39 AM
I think it's pretty cool...	greenmachine	Videos	5	August 27th, 2013 12:29 PM
pretty cool bodykit - Lent	joes280	2008 - 2012 Ninja 250R Farkles	63	October 4th, 2012 04:34 AM
Met someone pretty cool today	THE BIG SITT	General Motorcycling Discussion	14	February 21st, 2012 08:04 AM

July 11th, 2014, 09:16 AM	#3
broken neck ninjette.org guru Name: Thomas Location: Montréal Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Special Edition (sold), 2017 CRF250 Rally Posts: 384	Love the Ninja 250 wheels... Almost the same as my 2011 SE wheels with the red tape...

July 11th, 2014, 02:59 PM	#6
Ninjinsky ninjette.org certified postwhore Name: Paul Location: UK Join Date: Apr 2014 Motorcycle(s): Ninja 250, Yamaha RS200 (classic) Posts: A lot.	I'm hoping one of the big 4 will develop the stepped piston 2 stroke http://users.breathe.com/prhooper/opads.htm It is a 2stroke that uses a stepped piston instead of the crankcase so you can use wet sump and a lot less pollution to meet regs.