September 5th, 2019, 05:49 AM | #1 |
ninjette.org member
Name: Frank
Location: Maine/Nova Scotia
Join Date: Sep 2016 Motorcycle(s): many! Posts: 107
|
[2015 Ninja 300] Air Filter Housing Separation
Hi All,
Do the plastic halves holding the air filter element just pull apart or is there something that's supposed to unscrew or ? I don't want to just yank it apart in my impatience... thanks! |
|
September 5th, 2019, 12:41 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
What are you trying to accomplish?
Last futzed with by DannoXYZ; September 5th, 2019 at 04:10 PM. |
|
September 5th, 2019, 12:52 PM | #3 |
ninjette.org member
Name: Frank
Location: Maine/Nova Scotia
Join Date: Sep 2016 Motorcycle(s): many! Posts: 107
|
Just replacing the air filter.... I found a video showing the two halves of the plastic doo-dad sandwiching the filter element just snap apart. This is what I suspected but I didn't want to break anything. Thanks for taking time to respond.
|
|
September 5th, 2019, 01:33 PM | #4 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
[Hi Frank, I hope you're doing well.]
|
|
September 5th, 2019, 01:38 PM | #5 |
ninjette.org member
Name: Frank
Location: Maine/Nova Scotia
Join Date: Sep 2016 Motorcycle(s): many! Posts: 107
|
hey Jim - all good, hope the same is true with you!
Just got back from several days LSR up at Loring, now in Nova Scotia, heading out to a track day tomorrow with the little Ninja.... Life is good! |
|
September 5th, 2019, 01:46 PM | #6 |
ninjette.org member
Name: Frank
Location: Maine/Nova Scotia
Join Date: Sep 2016 Motorcycle(s): many! Posts: 107
|
BTW, tons of cool pics on book of faces, look at Loring Timing Association if you're interested...
|
|
September 5th, 2019, 01:56 PM | #7 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
I hope you had an excellent time there. Good luck at track day... I still need to get to one here sometime. I even bought a suit for it.
|
|
September 5th, 2019, 04:09 PM | #8 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
There's two studs in middle that connect the 2-halves. Just grab ends of studs close to them and pull apart.
|
|
September 6th, 2019, 05:35 AM | #9 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
|
|
September 6th, 2019, 06:27 AM | #10 | |
ninjette.org newbie
Name: Steve
Location: Westchester
Join Date: Jun 2015 Motorcycle(s): 08 250 Posts: 3
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Air Filter from Hurricane Racing for the Ninja 300 & 250R | DaBlue1 | 2013 - 2017 Ninja 300 Farkles | 8 | March 25th, 2013 04:46 AM |
|
|