May 12th, 2019, 06:29 PM | #41 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
No need for pod filters as they won't flow any better than best-flowing airbox in market. Ninjette's airbox and filter is as large as those on my CBR600RR with 4x power. If you measure, you'll actually have a reduction in surface area with pod filters compared to stock. In any case, pod filters don't gain any flow, but will cause stumbling in cross-winds.
Start with stock 38 pilots and 105 mains with washer under slide needle to enrich mid-range and that should be perfectly spot-on. |
|
May 13th, 2019, 05:15 AM | #42 | |
ninjette.org member
Name: Simon
Location: Westerly Rhode Island
Join Date: Apr 2019 Motorcycle(s): 1993 katana 600 (sold) 1999 gsxr750 srad (sold) 1991 zx10 (blown)2016 grom 125 (sold) 2006 ninja 250r (current Posts: 35
|
Quote:
|
|
|
May 13th, 2019, 11:02 AM | #43 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
There's two bolts that ho!d airbox to frame.
I've actually retrofitted round spring-clamps from pre-gen to my new-gen so I can pull off carbs quicker. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bike won't start and backfires when trying to start | TrickyTriggs | General Motorcycling Discussion | 30 | April 16th, 2018 08:35 PM |
2006 Ninja EX250-F won't start need help! | C_RICH | 1986 - 2007 Ninja 250R Tech Talk | 7 | March 10th, 2015 06:51 PM |
2004 ex250 won't start | fallsdown76 | 1986 - 2007 Ninja 250R Tech Talk | 7 | October 21st, 2013 10:50 PM |
07 ninja won't start | Mark-96-XJ | 1986 - 2007 Ninja 250R Tech Talk | 13 | September 30th, 2011 02:45 PM |
Ninja Won't Start!! | Tintkng | 2008 - 2012 Ninja 250R Tech Talk | 3 | March 7th, 2010 12:18 PM |
|
|