List of mods so far - Page 5

shadewalker · February 5th, 2014, 01:09 AM

Wow finally problem solved.. Had to remove the dust caps that came with the pyramid bearings and had to use my own.. They were causing interference and made my life hell..

old3 · February 5th, 2014, 12:19 PM

It had to be something simple, right? Good you figured it out!

shadewalker · February 5th, 2014, 12:20 PM

Quote:

Originally Posted by old3

It had to be something simple, right? Good you figured it out!

you have no idea how relieved i am..

old3 · February 5th, 2014, 12:21 PM

Did you ever post up the condition of the stock loose ball bearings and races? Were they pounded?

shadewalker · February 6th, 2014, 11:35 AM

Quote:

Originally Posted by old3

Did you ever post up the condition of the stock loose ball bearings and races? Were they pounded?

no i havent. but they weren't pounded for sure came out almost brand new. i could clean the bearings and races and post pics if you would like me to.

shadewalker · February 6th, 2014, 11:40 AM

just got done installing the SSR preload adjusters. took me 15 minutes after jacking the front up. special mention to Spacep0d for making my life easier by uploading the step by step procedure.

also a small change i made was to the gas tank cover nuts. changed them to red too

and im also attaching a pic of the bracked i had made for using the 636 akra on my bike. its made of ss and was fashioned using argon welding. strong stuff i tell you that ss.

so now with all the mods done. i can rest..

old3 · February 6th, 2014, 05:18 PM

Quote:

Originally Posted by shadewalker

no i havent. but they weren't pounded for sure came out almost brand new. i could clean the bearings and races and post pics if you would like me to.

No, no, not necessary. Did you have the wobbles yet. I forget as we cross post in so many different threads.

shadewalker · February 6th, 2014, 08:13 PM

Quote:

Originally Posted by old3

No, no, not necessary. Did you have the wobbles yet. I forget as we cross post in so many different threads.

Oh yeah at about 50 mph.. Felt horrible

shadewalker · February 8th, 2014, 01:45 AM

Just overhauled the calipers.. They were full of the Orange goop that brake oil turns to..yeeuch.. Now it's properly running all 4 pistons..

Xtina · February 10th, 2014, 06:00 PM

Quote:

Originally Posted by shadewalker

Just overhauled the calipers.. They were full of the Orange goop that brake oil turns to..yeeuch.. Now it's properly running all 4 pistons..

Powdercoat it!

shadewalker · February 10th, 2014, 08:13 PM

Quote:

Originally Posted by Xtina

Powdercoat it!

The caliper? But it's absolutely new now.. Not even a single scratch on the original paint

shadewalker · February 27th, 2014, 03:18 AM

Time to Convert my stock exhaust headers to a full open system.. This weekend I'm going to sit with a Silencer guy and decat my exhaust and also get a new adapter made for the slip on..Let's see how different the bike sounds now.. Super excited :-D

shadewalker · October 2nd, 2014, 08:46 AM

So I'm back.. Really sorry for the absence. I just got sidetracked by my vlogging and work. Ok so here's what I've been upto..

Track days track days and more track days.. Almost thrice a month now lol. It's an addiction I can't get over now. So I've obviously had to mod my bike accordingly. So here's a list of all that I've added since the last time.

10r master cylinder.
Brembo caliper
Ohlins rear suspension
Racetech gold valve emulators
Lust racing 40mm raising links.

Michelin pilot street radials. Since I can't get diablo Rosso 2 in India. Dammit.

Two brothers slip on and a decatted header.

Well that's as much as I remember. I'll be having my first test with the new suspension this weekend and I'll also. Compete in the 251 to 400 class for the best lap times. God that makes me nervous..

We'll wish me Luck guys and ill be sure to. Post a review by Monday.

JohnnyBravo · October 2nd, 2014, 09:30 AM

Your ride is def lookin sweet!!!

shadewalker · October 2nd, 2014, 09:52 PM

Quote:

Originally Posted by JohnnyBravo

Your ride is def lookin sweet!!!

Thanks man..

Here's a video of the latest top Speed Run.

Episode 14 : Ninja 300 Top Speed Run : Quick Shif…: http://youtu.be/7jLtC8Dzwhg

JohnnyBravo · October 3rd, 2014, 01:25 AM

Sweet vid... Ridin like a boss

hope your race goes well! The roads in India look exhilarating!!!

shadewalker · October 3rd, 2014, 02:23 AM

Quote:

Originally Posted by JohnnyBravo

Sweet vid... Ridin like a boss

hope your race goes well! The roads in India look exhilarating!!!

Every second of my life is exhausting living in India. 😕

Do check out my. Other videos too.. 😊

JohnnyBravo · October 3rd, 2014, 02:29 AM

The road videos I've seen remind me of my times in the middle east... Wild times

Will do... When I wake again

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mods	heyzeus	1986 - 2007 Ninja 250R Tech Talk	5	June 17th, 2014 08:18 PM
List Your Mods!!!	kkim	General Motorcycling Discussion	210	March 12th, 2014 11:49 AM
Yes or no on these mods?	Kerberos	General Motorcycling Discussion	19	December 13th, 2011 10:33 AM
List of Mods	TheJimmyEnglish	2008 - 2012 Ninja 250R Farkles	63	October 16th, 2011 08:55 AM
My mods and what i got for my $$	eddiekay	General Motorcycling Discussion	2	August 9th, 2011 09:27 AM

February 5th, 2014, 01:09 AM	#161
shadewalker ninjette.org member Name: Archit Location: India Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181	Wow finally problem solved.. Had to remove the dust caps that came with the pyramid bearings and had to use my own.. They were causing interference and made my life hell..

February 5th, 2014, 12:19 PM	#162
old3 ninjette.org sage Name: Jim Location: NJ Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913	It had to be something simple, right? Good you figured it out!

February 5th, 2014, 12:21 PM	#164
old3 ninjette.org sage Name: Jim Location: NJ Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913	Did you ever post up the condition of the stock loose ball bearings and races? Were they pounded?

February 27th, 2014, 03:18 AM	#172
shadewalker ninjette.org member Name: Archit Location: India Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181	Time to Convert my stock exhaust headers to a full open system.. This weekend I'm going to sit with a Silencer guy and decat my exhaust and also get a new adapter made for the slip on..Let's see how different the bike sounds now.. Super excited :-D

October 2nd, 2014, 09:30 AM	#174
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Your ride is def lookin sweet!!!

October 3rd, 2014, 01:25 AM	#176
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Sweet vid... Ridin like a boss hope your race goes well! The roads in India look exhilarating!!!

October 3rd, 2014, 02:29 AM	#178
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	The road videos I've seen remind me of my times in the middle east... Wild times Will do... When I wake again