ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old April 4th, 2021, 04:16 PM   #121
JayVapes
ninjette.org member
 
JayVapes's Avatar
 
Name: Honorio
Location: Rio Grande Valley
Join Date: Aug 2020

Motorcycle(s): Ninja EX250

Posts: 118
Blog Entries: 8
righteous
__________________________________________________
RIDE IT UNTIL THE WHEELS FALL OFF, THEN BUY NEW WHEELS
JayVapes is offline   Reply With Quote




Old April 7th, 2021, 05:27 PM   #122
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
This 250 refurb completed today, can't do any better than these, note EX500 rail filter plugged in. Tighter, it has more of a tendency to stay put. Found the 250 filter on these displaced and wedged up inside the fuel line an inch or so.
Attached Images
File Type: jpg jt1.jpg (114.6 KB, 17 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; April 9th, 2021 at 07:55 AM.
ducatiman is online now   Reply With Quote


1 out of 1 members found this post helpful.
Old April 8th, 2021, 02:01 AM   #123
JayVapes
ninjette.org member
 
JayVapes's Avatar
 
Name: Honorio
Location: Rio Grande Valley
Join Date: Aug 2020

Motorcycle(s): Ninja EX250

Posts: 118
Blog Entries: 8
I recommend your work always!
__________________________________________________
RIDE IT UNTIL THE WHEELS FALL OFF, THEN BUY NEW WHEELS
JayVapes is offline   Reply With Quote


Old April 8th, 2021, 09:02 PM   #124
JayVapes
ninjette.org member
 
JayVapes's Avatar
 
Name: Honorio
Location: Rio Grande Valley
Join Date: Aug 2020

Motorcycle(s): Ninja EX250

Posts: 118
Blog Entries: 8
xp that was my filter down inside that line. I have no idea how the motorcycle even ran!
__________________________________________________
RIDE IT UNTIL THE WHEELS FALL OFF, THEN BUY NEW WHEELS
JayVapes is offline   Reply With Quote


Old April 9th, 2021, 05:13 AM   #125
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Haha, I had no idea that was you responding in the thread here, JT!

If it ran (at all) before, it should run awesome now. We shall see.
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 9th, 2021, 05:16 AM   #126
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
note kink in the vent line i referred to, textbook otherwise.
Attached Images
File Type: jpg jt2.jpg (119.1 KB, 12 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 13th, 2021, 12:16 PM   #127
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
EX500 carbset refurbed today, these for sale, my property
Attached Images
File Type: jpg 91-2.jpg (148.4 KB, 12 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 16th, 2021, 10:28 AM   #128
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
^ SOLD ^

with yet another 500 set in the works, again my property, will be for sale
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; April 18th, 2021 at 05:57 AM.
ducatiman is online now   Reply With Quote


Old April 22nd, 2021, 05:34 PM   #129
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
today, knocked off a set of ZR750 Kaw carbs, Keihins reminiscent of 2# linked EX250 sets.
Attached Images
File Type: jpg zr7-7.jpg (148.5 KB, 8 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 23rd, 2021, 12:04 PM   #130
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
back to EX500's today
Attached Images
File Type: jpg jad7.jpg (141.4 KB, 4 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 25th, 2021, 12:16 PM   #131
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Echo blower and Craftsman weed whacker both got running today, both needing carb work....belonging to my (lucky) next door neighbor. Ditto on his pressure washer just a couple weeks ago.
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old April 26th, 2021, 05:54 PM   #132
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
back to a 250 carbset today
Attached Images
File Type: jpg xj1.jpg (97.4 KB, 4 views)
File Type: jpg xj5.jpg (108.3 KB, 5 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 6th, 2021, 03:10 PM   #133
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
received at 10am, refurbed and shipped back out by 4:30 today. Not too shabby if i don't say so myself. Now bolt on runners, problems included missing pilot screw orings and a frozen in place decel valve diaphragm.
Attached Images
File Type: jpg danm1.jpg (100.5 KB, 4 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; May 6th, 2021 at 04:49 PM.
ducatiman is online now   Reply With Quote


Old May 6th, 2021, 07:51 PM   #134
JayVapes
ninjette.org member
 
JayVapes's Avatar
 
Name: Honorio
Location: Rio Grande Valley
Join Date: Aug 2020

Motorcycle(s): Ninja EX250

Posts: 118
Blog Entries: 8
so modest
__________________________________________________
RIDE IT UNTIL THE WHEELS FALL OFF, THEN BUY NEW WHEELS
JayVapes is offline   Reply With Quote


Old May 8th, 2021, 11:38 AM   #135
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
finished another set of 500's today which underwent quite a transition. Both pilot jets and emulsion tubes were clogged, badly varnished.
Attached Images
File Type: jpg sm1.jpg (131.9 KB, 9 views)
File Type: jpg sm5.jpg (106.1 KB, 8 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 9th, 2021, 06:51 AM   #136
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
been advised of Mikuni/Ducati carbs incoming
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 15th, 2021, 06:22 PM   #137
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
especially nasty Ducati/Mikuni's still in process. A couple before/after shots. To update when done tomorrow.
Attached Images
File Type: jpg tw5.jpg (130.0 KB, 3 views)
File Type: jpg tw7.jpg (155.6 KB, 3 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 16th, 2021, 03:56 PM   #138
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
all done, 1 more before/after shot
Attached Images
File Type: jpg tw2.jpg (150.4 KB, 0 views)
File Type: jpg tw15.jpg (141.5 KB, 0 views)
File Type: jpg tw13.jpg (127.2 KB, 2 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 19th, 2021, 07:24 PM   #139
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
a nasty set of EX500 carbs here for normal refurb. Final pics tomorrow. Lets see if we can wake these up a bit.
Attached Images
File Type: jpg am1.jpg (128.4 KB, 6 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old May 20th, 2021, 11:24 AM   #140
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
yup, now awoken to bolt on runners.
Attached Images
File Type: jpg am6.jpg (148.9 KB, 5 views)
File Type: jpg am7.jpg (139.1 KB, 5 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old June 7th, 2021, 07:35 AM   #141
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Today 3 items incoming from landscaper to me.

The first, a non-starting Craftsman pressure washer already done. Required a carb pull/clean (NO parts). New fangled carb featuring plastic body/internals......now starts 1st pull , goes into reliable steady idle.
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; June 7th, 2021 at 02:05 PM.
ducatiman is online now   Reply With Quote


Old June 11th, 2021, 06:15 PM   #142
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Vulcan 500 carbset refurbed today, using a new general cleaner. Worked out well, restored brass tuning components like new, carb bodies greatly improved over what was received.
Attached Images
File Type: jpg mcrist2.jpg (100.6 KB, 7 views)
File Type: jpg mcrist3.jpg (95.0 KB, 6 views)
File Type: jpg mcrist4.jpg (95.0 KB, 6 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old June 19th, 2021, 01:49 PM   #143
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
These 2 fitties came out no less than spectacular today. Using a newfound cleaner...as clean inside as outside. Wet tested, fuel levels tweaked, ALL circuits confirmed clear...these'll bolt on and GO (the general idea)
Attached Images
File Type: jpg spence1.jpg (150.8 KB, 2 views)
File Type: jpg spence3.jpg (106.5 KB, 2 views)
File Type: jpg spence4.jpg (107.0 KB, 2 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old June 20th, 2021, 05:09 PM   #144
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Knocked these 500's off today, will be fine runners. Note restored to like-new factory supplied brass tuning components.

nat2.jpg

nat3.jpg

nat5.jpg
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; June 20th, 2021 at 06:17 PM.
ducatiman is online now   Reply With Quote


Old June 25th, 2021, 09:36 AM   #145
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Today a set of 4 banger Keihin FCR39 for Honda CB900RR on the bench. A ton of parts, better pics to follow. So far, findings include 3 of 4 pilot jets totally clogged. Further advised bike has sat for 7 years.
Attached Images
File Type: jpg fcr1.jpg (137.4 KB, 9 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; June 25th, 2021 at 07:29 PM.
ducatiman is online now   Reply With Quote


Old July 6th, 2021, 12:45 PM   #146
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
the FCR's await seals. In the meantime........
Attached Images
File Type: jpg fcr8.jpg (131.8 KB, 12 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 7th, 2021, 09:02 AM   #147
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Oh oh, torn diaphragm on 250 set i'm currently doing.
Attached Images
File Type: jpg mar1.jpg (72.3 KB, 5 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 7th, 2021, 04:08 PM   #148
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
new diaphragms installed, carbs done, they worked out quite nice. EX500 mesh rail filter installed.
Attached Images
File Type: jpg mar5.jpg (112.3 KB, 5 views)
File Type: jpg mar6.jpg (111.0 KB, 4 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; July 7th, 2021 at 05:10 PM.
ducatiman is online now   Reply With Quote


Old July 8th, 2021, 12:29 PM   #149
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
and a set of fi' hunnerts done today.
Attached Images
File Type: jpg htrich5.jpg (131.2 KB, 3 views)
File Type: jpg htrich4.jpg (146.3 KB, 4 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


1 out of 1 members found this post helpful.
Old July 10th, 2021, 03:55 PM   #150
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
seals (not supplied in kits) finally arrived today allowing me to complete these FCR39's from a Honda CBR900.
Attached Images
File Type: jpg fcr9.jpg (121.3 KB, 3 views)
File Type: jpg fcr10.jpg (117.8 KB, 3 views)
File Type: jpg fcr11.jpg (104.3 KB, 3 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 12th, 2021, 11:21 AM   #151
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
today, in quite the transition, i'm on a single carb from an older '82 Honda CM250. Worked out well.
Attached Images
File Type: jpg jcal1.jpg (104.8 KB, 5 views)
File Type: jpg jcal5.jpg (101.1 KB, 4 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 13th, 2021, 05:32 AM   #152
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
This thread is not good for my diet......





































Too many carbs.....
csmith12 is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old July 13th, 2021, 12:57 PM   #153
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Working on poorly set up 250 carbs today. Inactive, dead slides...replacement diaphragm rubbers incorrectly installed, and dead floats.... amongst other problems.

Completed pics will follow.
Attached Images
File Type: jpg water8.jpg (106.1 KB, 1 views)
File Type: jpg water6.jpg (108.5 KB, 1 views)
File Type: jpg water7.jpg (96.4 KB, 1 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com

Last futzed with by ducatiman; July 14th, 2021 at 07:08 AM.
ducatiman is online now   Reply With Quote


Old July 24th, 2021, 03:52 PM   #154
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
500's done today turned out textbook perfect.
Attached Images
File Type: jpg sholl4.jpg (141.7 KB, 7 views)
File Type: jpg sholl5.jpg (125.6 KB, 5 views)
File Type: jpg sholl6.jpg (125.6 KB, 6 views)
File Type: jpg sholl8.jpg (122.7 KB, 6 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 27th, 2021, 01:01 PM   #155
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Near done today , a Keihin set from a Honda CBR250RR MC22 (Australian model) aka "Babyblade" here for a "functional clean".

Refurbed original jetting installed, the kit the owner supplied used different sizes....opted to stick with OEM 105/102 mains (note inner and outer main jets are sized differently)

Not perfect, but greatly improved in a visual sense, I do anticipate will be fine runners.
Attached Images
File Type: jpg klima6.jpg (128.5 KB, 5 views)
File Type: jpg klima1.jpg (110.6 KB, 3 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 27th, 2021, 05:53 PM   #156
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
finished this evening
Attached Images
File Type: jpg klima7.jpg (116.3 KB, 2 views)
File Type: jpg klima10.jpg (123.2 KB, 3 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old July 28th, 2021, 07:41 AM   #157
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13

Link to original page on YouTube.

csmith12 is offline   Reply With Quote


Old August 8th, 2021, 01:52 PM   #158
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Rained near all day here.....perfect time to tackle some equipment maintenance prior to knocking this 250 set off, which came out near perfect.
Attached Images
File Type: jpg sal3.jpg (103.0 KB, 9 views)
File Type: jpg sal6.jpg (96.2 KB, 7 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old August 10th, 2021, 08:22 AM   #159
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
rained yet again.....so I knocked off these EX500's. What the heck, can't ride anyways.
Attached Images
File Type: jpg gort2.jpg (150.9 KB, 4 views)
File Type: jpg gort4.jpg (108.5 KB, 1 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Old August 17th, 2021, 01:23 PM   #160
ducatiman
ninjette.org certified postwhore
 
ducatiman's Avatar
 
Name: Gordon
Location: new york
Join Date: Sep 2009

Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R

Posts: A lot.
MOTM - Nov '18, Mar '17
Nope, not the same, but another set of 500's came out nice today. Bolt-on runners, yup. Shiny brass, yup. All original tuning components restored/reused.
Attached Images
File Type: jpg caleb2.jpg (129.5 KB, 7 views)
__________________________________________________
gordon@customcarbservices.com
Custom Carb Service
www.customcarbservices.com
ducatiman is online now   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
[roadracingworld.com] - Yamaha VR46 Master Camp Video: Day Four Was A Special Day For Ninjette Newsbot Motorcycling News 0 May 26th, 2019 10:52 AM
[roadracingworld.com] - â??Racers Edge Performance Hosting Track Day/ Practice Day Ap Ninjette Newsbot Motorcycling News 0 March 25th, 2015 02:20 PM
[kropotkin thinks...] - IMS Press Release: A Day-By-Day Guide To What's On At The Red Ninjette Newsbot Motorcycling News 0 August 5th, 2014 09:30 AM
[motorcycledaily.com] - Max Biaggi Finishes First Day of Two-Day Ducati MotoGP Test ( Ninjette Newsbot Motorcycling News 0 June 6th, 2013 05:10 PM
[kropotkin thinks...] - Shots In The Dark, Day 4: Scott Jones, Race Day Ninjette Newsbot Motorcycling News 0 April 9th, 2013 03:50 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:34 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.