|
July 11th, 2013, 10:38 AM
|
#1 |
|
ninjette.org member
Name: Drew
Location: Northern Virginia
Join Date: Apr 2013 Motorcycle(s): 2006 Ninja 250 Posts: 179
|
Issue with old gen starting
06 rode 200 miles back from obx, parked, went to start up several days later and it won't turn over...
Never had any issues with this before? Lights turn on so battery shouldn't be dead? Also bike is idling a bit low? How can I adjust this Does anyone seafoam these?
__________________________________________________
http://i857.photobucket.com/albums/a...ps2080efbb.jpg |
|
|
|
July 11th, 2013, 10:43 AM
|
#2 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Yes, we use seafoam but your success will vary. My best guess is your battery is low. ie... enough to work the lights but not enough to start it. Try a jump start.
Next would be to check/clean/tighten your battery terminals while your there. Good luck Drew!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
|
July 11th, 2013, 10:48 AM
|
#3 |
|
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
try a bump/push start
__________________________________________________
Unregistered found this post helpful. Track Day Preparation Checklist 1. Financial 2. Mental 3. Physical 4. Gear / Bike |
|
|
|
|
July 13th, 2013, 05:17 PM
|
#4 |
|
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to pre-gen tech
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New-gen engine in Pre-gen frame. Oil leak under exhaust ports. | AFazakerley | 2008 - 2012 Ninja 250R Tech Talk | 11 | June 5th, 2016 02:03 PM |
| 2008 Not starting - battery issue? | Ash | 2008 - 2012 Ninja 250R Tech Talk | 8 | April 14th, 2015 08:51 AM |
| Swapped New gen forks onto pregen, kept old gen ignition switch. | thumper64 | 1986 - 2007 Ninja 250R Tech Talk | 4 | March 31st, 2014 07:05 PM |
| ninja 250 starting issue | ninjawing | 2008 - 2012 Ninja 250R Tech Talk | 21 | October 1st, 2013 10:33 AM |
| Compare new-gen and old-gen fork inner/upper tube | abhijitz | 2008 - 2012 Ninja 250R Tech Talk | 2 | February 23rd, 2013 09:22 AM |
|
|
