April 1st, 2013, 11:22 AM | #1 |
ninjette.org member
Name: Annalaura
Location: Las Vegas, NV
Join Date: Feb 2013 Motorcycle(s): 2006 Kawasaki Ninja 250R, 2008 Kawasaki Ninja 250R Posts: 39
|
Turn Signals not working correctly
Hi, I'll admit that I am a newb when it comes to mechanics and so far a lot has been going wrong while trying to (mostly cosmetically) mod my 06 ninja 250. The previous owner had installed some flush mount turn signals from some sort of cruiser and honestly they looked pretty ugly on my bike. So I bought some small stick on led turn signals from ebay. These:
I installed them on my bike the same way I took the other ones off, but instead of turn signals I have hazards. With either direction that I turn on the signals, all four lights flash. Has anyone experienced this and knows how to fix the problem? Thank you.
__________________________________________________
If your surroundings are not a blur, then you are riding too slow. |
|
April 1st, 2013, 12:55 PM | #2 |
ninjette.org member
Name: milhouse
Location: Santa Monica, CA
Join Date: Mar 2013 Motorcycle(s): 04 Ninja 250 Posts: 29
|
|
|
April 1st, 2013, 01:11 PM | #3 |
ninjette.org member
Name: Annalaura
Location: Las Vegas, NV
Join Date: Feb 2013 Motorcycle(s): 2006 Kawasaki Ninja 250R, 2008 Kawasaki Ninja 250R Posts: 39
|
Hey, thanks
__________________________________________________
If your surroundings are not a blur, then you are riding too slow. |
|
April 1st, 2013, 01:26 PM | #4 |
ninjette.org member
Name: milhouse
Location: Santa Monica, CA
Join Date: Mar 2013 Motorcycle(s): 04 Ninja 250 Posts: 29
|
No problem. I was missing some turn signals so I was looking at those leds as well, but in the end just decided to keep it stock.
Btw, tons of other good info on that site. I'm very much a newb and its basically become my homepage since I got my bike. |
|
April 1st, 2013, 04:42 PM | #5 |
ninjette.org member
Name: John
Location: Crossville, Tn.
Join Date: Oct 2010 Motorcycle(s): '02 Ninja 250, '98 Triumph Sprint 900, '69 H-D Sportster XLCH 900 Posts: 80
|
'06?
You sure your bike is an '06?
|
|
April 1st, 2013, 08:46 PM | #6 |
ninjette.org member
Name: Annalaura
Location: Las Vegas, NV
Join Date: Feb 2013 Motorcycle(s): 2006 Kawasaki Ninja 250R, 2008 Kawasaki Ninja 250R Posts: 39
|
Positive, that's what it says on the title. That's not my bike in the pic, that's just an example pic.
__________________________________________________
If your surroundings are not a blur, then you are riding too slow. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
no turn signals working | kaosyin | 2008 - 2012 Ninja 250R Tech Talk | 3 | January 29th, 2015 04:53 PM |
Indicator Problem - Turn Signals Not Working | alex192 | 2008 - 2012 Ninja 250R Tech Talk | 6 | December 7th, 2014 09:56 AM |
Turn signals stopped working. | Insan3guy | General Motorcycling Discussion | 1 | October 15th, 2013 10:17 PM |
Turn Signals Stopped Working! | DisciplesHeart | 2008 - 2012 Ninja 250R Tech Talk | 18 | March 21st, 2012 08:45 PM |
Left turn signals not working properly | maraci | 2008 - 2012 Ninja 250R Tech Talk | 7 | April 16th, 2011 07:38 PM |
|
|