ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old March 23rd, 2018, 10:01 PM   #1
Josh4uto
ninjette.org newbie
 
Name: Joshua
Location: 3341 treyburn dr
Join Date: Mar 2018

Motorcycle(s): 99 ninja ex250

Posts: 6
Easy easy easy tail light/ turn signal led mod

So ive seen lot videos people doing tail light mod but never found and info on parts used other then using stock signal bulbs sorry imo that lame lol but each its on i guess.
Im here to help out next guy need help or info on this mod.
I will lay out how remove housing , parts and tools

1) remove 2 10mm bolts under seat to remove housing
2) unplug 2pin plug attach to tail light bulb
That easy to remove
3) now there is one screw on each lens that need be removed and pop out lens carefully there amall tab at top that hold it in ao dont pull straight out will break , pull down and out
4) take 1/4 inch drill bit are dremel and cleanly knock down the raised portion of plastic to make it smooth
5) now want make small notch bout 1/4 inch for the bulb socket to pop into housing flushly
6) NO GLUE NEEDED ONLY 10MM WRENCH , PHILLIPS HEAD , DREMEL
GUESS WHAT YOUR DONE THAT IT
PARTS USED FOR PROJECT
1) OREILLYS GM 3157 SOCKET PART #85881
2) HALOGEN / LED BULB YOUR CHOICE I WENT WITH SUPER BRIGHT WHITE LED BULB SUPER BRIGHT
NOW YOUR TAILIGHT WILL BE SUPER BRIGHT AT NIGHT AND SIGNAL BE BRIGHT AS WELL AND NOTICED
WIRING STEPS
1) USE WIRES GOING TO OLD TURN SIGNAL AND USE ON NEW SOCKET REALLY SIMPLE 3 WIRE WERE AS OLD 2 WIRE ONLY THING DIFFERENT YOU GROUND 3 WIRE TO BIKE

HOPE THIS HELPS YOU OUT NOW YOU CAN DELETE THE BULKY PLASTIC HOLDING SIGNALS AND TAG SUPER CLEAN LOOK
Attached Images
File Type: jpg 1521867541611147606539.jpg (71.5 KB, 16 views)
File Type: jpg 1521867580612604535380.jpg (32.8 KB, 16 views)
File Type: jpg 15218676130951549793991.jpg (75.0 KB, 17 views)
Josh4uto is offline   Reply With Quote




Old January 28th, 2019, 04:17 PM   #2
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Thanks for the DIY write up!
Snake is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Cheap and easy tail box. RogerPapaMike Cargo Space 5 January 10th, 2024 06:29 PM
gsxr damper easy mod mike_sema 2008 - 2012 Ninja 250R Tech Talk 11 March 18th, 2020 05:33 PM
turn signal tail light mod help plz BukkShot 1986 - 2007 Ninja 250R Tech Talk 3 March 18th, 2015 08:44 PM
go easy on me - i'm new. vsnizzle General Motorcycling Discussion 11 May 12th, 2014 05:47 AM
I Know This Should be Really Easy but... Scattcatt 2008 - 2012 Ninja 250R Tech Talk 20 August 25th, 2011 11:04 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 01:02 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.