August 24th, 2016, 11:54 PM | #1 |
ninjette.org member
Name: elle
Location: SF Bay Area
Join Date: Oct 2009 Motorcycle(s): 10 kawi ninja 250 Posts: 26
|
so, about those carb diy photos
i have a 2010 with a colorado title, that hasn't moved in two years.
someone else took off the tank and the carbs, cleaned the carbs and may or may not have put them back completely correctly. they arent upside down, but im not sure all the hoses are in the right places. and the tank isnt back on at all. with all of its hoses. and the battery isn't in. i'm told, it's just a matter of putting all the connections back where they go, and then it either works or it doesnt, but i'm finding that the photos in the diy threads are insufficient. does anyone have a link or a website or a video that shows what i need? even a better search term would help at this point. anything? anybody? |
|
August 25th, 2016, 03:26 AM | #2 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Try looking through the parts diagrams.
It probably doesn't have that CA emissions tank, so it should be easier. If it does, then navigate your way to CA bike diagrams on the website. If that still doesn't work, then hopefully someone close by can help you. Where in the bay are you? |
|
September 24th, 2016, 12:02 PM | #3 |
ninjette.org member
Name: elle
Location: SF Bay Area
Join Date: Oct 2009 Motorcycle(s): 10 kawi ninja 250 Posts: 26
|
I think I got all the hoses correct on the carb and put the tank back on, but found another hose piled in with all the covers and fairings. I do have some empty nibs, but this hose doesn't look like it connects them.
I'm in los altos. |
|
September 25th, 2016, 05:52 AM | #4 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
See if this section has what you are looking for - http://faq.ninja250.org/wiki/How_do_...n_the_carbs%3F
|
1 out of 1 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY Shimming the carb needles. | Viper-Byte | 2008 - 2012 Ninja 250R Tech Talk | 1078 | April 17th, 2014 10:16 PM |
DIY Carb Sync Tool | shiftdrift06 | Free stuff! | 9 | May 1st, 2012 02:47 AM |
Kkim's photos on DIY's are gone | Ichiro | Forum Information | 56 | December 10th, 2011 01:02 PM |
DIY- Carb Work on 2008 Ninja 250 carbs | kkim | 2008 - 2012 Ninja 250R Tech Talk | 40 | September 8th, 2011 07:51 AM |
Question to DIY'ers / carb experts | Betlog | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 28th, 2010 07:51 PM |
|
|