Countershaft Question

JLinde1339 · December 5th, 2011, 12:51 PM

Okay, so I've been tearing my bike down, and came across a collar on the countershaft behind the sproket. Does anyone know the function of this thing? I'm guessing its a spacer to help keep the front sprocket properly distanced for aligning with the rear sprocket. Can somebody confirm this? Thanks in advance.
Posted via Mobile Device

Skippii · December 5th, 2011, 02:04 PM

This thing, 92027?
http://www.ronayers.com/Fiche/TypeID...p/Transmission

Yes.

JLinde1339 · December 5th, 2011, 02:19 PM

I think that's the one, but the fiche doesn't come up on my mobile phone, just the parts list. And the description sounds right. So I was trying to clean the engine off a bit, and this thing just popped off and fell on the floor. It was so grimy, I couldn't tell from where, but that's where it fit. Well, almost, cuz it doesn't butt right up against the casing due to all the sludge on it. Gonna be cleaning her up tonite.
Posted via Mobile Device

Jinx250 · December 6th, 2011, 09:22 AM

Quote:

Originally Posted by Skippii

This thing, 92027?
http://www.ronayers.com/Fiche/TypeID...p/Transmission

Yes.

That's funny! If you can see that part then you have some major issues, since that collar is supposed to be inside the case.

JLinde1339 · December 6th, 2011, 09:41 AM

Well, I cleaned up the frame and swingarm last nite. Plan to clean the engine tonite to get all the grime off it. I'll see how it fits. I'll also confirm if we're talking about the same part when I check the parts diagram on my laptop. Thanks for the freak out of the day, jinx.

Posted via Mobile Device

JLinde1339 · December 7th, 2011, 07:29 AM

Okay, cleared the gunk off the engine. So the collar doesn't go on the drive shaft, but the shifter shaft. So I'm much less worried now.
Posted via Mobile Device

Skippii · December 7th, 2011, 04:32 PM

Funny thing is it actually has the exact same part number:
http://www.ronayers.com/Fiche/TypeID...ange_Mechanism

el250 · December 8th, 2011, 01:33 AM

92027 is just the reference number, 92027-1302 is not 92027-1440.

Jinx250 · December 8th, 2011, 07:50 AM

Quote:

Originally Posted by JLinde1339

Thanks for the freak out of the day, jinx.

Posted via Mobile Device

You're welcome! Pics in cases like this are priceless though, because no matter how many words you use, nothing can replace a pic of the actual part. I can usually ID about 70% of parts from a good description, but almost 99% with a pic.

JLinde1339 · December 13th, 2011, 11:04 AM

I try to get pics of most things I come across. Usually for my own reference when I go to the store for parts or mods. In this case, my hands were so greased up I didn't want to touch my phone. I was actually texting my girlfriend in the house using a screwdriver. LOL
Posted via Mobile Device

Skippii · December 13th, 2011, 06:07 PM

Quote:

Originally Posted by JLinde1339

I try to get pics of most things I come across. Usually for my own reference when I go to the store for parts or mods. In this case, my hands were so greased up I didn't want to touch my phone. I was actually texting my girlfriend in the house using a screwdriver. LOL
Posted via Mobile Device

I want pics of you doing that...oh....wait....nevermind

JLinde1339 · December 14th, 2011, 01:04 PM

Haha! I'll have her snap a pic next time. Its a blackberry, non-touchscreen, if that helps the mental imagery...
Posted via Mobile Device

December 5th, 2011, 12:51 PM	#1
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	Countershaft Question Okay, so I've been tearing my bike down, and came across a collar on the countershaft behind the sproket. Does anyone know the function of this thing? I'm guessing its a spacer to help keep the front sprocket properly distanced for aligning with the rear sprocket. Can somebody confirm this? Thanks in advance. Posted via Mobile Device

December 5th, 2011, 02:04 PM	#2
Skippii Milkshake Drinker Name: Skippii Location: Richmond, Va Join Date: Aug 2011 Motorcycle(s): 2007 Orange DRZ400-S, 2005 Ninja 250 & Custom Thundercunt Dirt Chopper Posts: A lot.	This thing, 92027? http://www.ronayers.com/Fiche/TypeID...p/Transmission Yes. __________________________________________________ "What a sweetheart."- ninja_sleeper to me

December 7th, 2011, 04:32 PM	#7
Skippii Milkshake Drinker Name: Skippii Location: Richmond, Va Join Date: Aug 2011 Motorcycle(s): 2007 Orange DRZ400-S, 2005 Ninja 250 & Custom Thundercunt Dirt Chopper Posts: A lot.	Funny thing is it actually has the exact same part number: http://www.ronayers.com/Fiche/TypeID...ange_Mechanism __________________________________________________ "What a sweetheart."- ninja_sleeper to me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
countershaft balancer question	micoulisninja	2008 - 2012 Ninja 250R Tech Talk	23	August 2nd, 2014 06:53 AM
Need help removing front sprocket (countershaft)	cb160racer	2008 - 2012 Ninja 250R Tech Talk	37	November 11th, 2012 10:53 PM
going to 16 tooth countershaft sprocket?	thomason2wheels	2008 - 2012 Ninja 250R Tech Talk	3	September 17th, 2012 11:02 AM
Anyone find a 13T countershaft sprocket?	RaceBikeRentals	General Motorcycling Discussion	3	January 27th, 2010 09:14 PM
super tight countershaft nut	hzrnbgy	2008 - 2012 Ninja 250R Tech Talk	2	June 18th, 2009 01:44 PM

December 5th, 2011, 02:19 PM	#3
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	I think that's the one, but the fiche doesn't come up on my mobile phone, just the parts list. And the description sounds right. So I was trying to clean the engine off a bit, and this thing just popped off and fell on the floor. It was so grimy, I couldn't tell from where, but that's where it fit. Well, almost, cuz it doesn't butt right up against the casing due to all the sludge on it. Gonna be cleaning her up tonite. Posted via Mobile Device

December 6th, 2011, 09:41 AM	#5
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	Well, I cleaned up the frame and swingarm last nite. Plan to clean the engine tonite to get all the grime off it. I'll see how it fits. I'll also confirm if we're talking about the same part when I check the parts diagram on my laptop. Thanks for the freak out of the day, jinx. Posted via Mobile Device

December 7th, 2011, 07:29 AM	#6
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	Okay, cleared the gunk off the engine. So the collar doesn't go on the drive shaft, but the shifter shaft. So I'm much less worried now. Posted via Mobile Device

December 8th, 2011, 01:33 AM	#8
el250 no such thing as ninjette Name: AP Location: L.A., CA Join Date: May 2011 Motorcycle(s): (2) 1987 EX250E2, 1989 EL250B3, 1991 EL250E1, (3) 2005 EX250F19, 2007 EX250F7F, soon to add more.. Posts: 26	92027 is just the reference number, 92027-1302 is not 92027-1440.

December 13th, 2011, 11:04 AM	#10
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	I try to get pics of most things I come across. Usually for my own reference when I go to the store for parts or mods. In this case, my hands were so greased up I didn't want to touch my phone. I was actually texting my girlfriend in the house using a screwdriver. LOL Posted via Mobile Device

December 14th, 2011, 01:04 PM	#12
JLinde1339 Fighterer in Training Name: Joshua Location: Schenectady, NY Join Date: Jul 2011 Motorcycle(s): 2001 Ninja 250R Posts: 316	Haha! I'll have her snap a pic next time. Its a blackberry, non-touchscreen, if that helps the mental imagery... Posted via Mobile Device