February 27th, 2009, 01:48 PM | #41 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
can you give alittle more info about the shift rod. Is there a specific place to get one or a specific bike to get one off of? thanks
|
|
February 27th, 2009, 01:51 PM | #42 |
Join Date: Nov 2008 Posts: Too much.
|
I'm assuming the shift rod comes with the extenders.
|
|
February 27th, 2009, 01:57 PM | #43 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
duh.k cool. I havent seen that pic in a few days.sorry. I'm In.
|
|
February 27th, 2009, 02:01 PM | #44 |
Join Date: Nov 2008 Posts: Too much.
|
lol... not ragging you man... That's an assumption I'm making... I really have no idea if the shift rod is included. I'd like confirmation from ride2max of what exactly is included in the kit and see some pictures of what exactly will ship.
|
|
February 27th, 2009, 02:31 PM | #45 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
This is a great solution for street style rear sets. What are the max measurements from the stock position like up and back? Also can the adjustments made to the brake hose and switch be done in a way with out modifying or cutting anything? Just in case I want to put it back to original.
|
|
February 27th, 2009, 04:50 PM | #46 |
忍者
Name: Jake
Location: WA
Join Date: Dec 2008 Motorcycle(s): None Now - Used to have an '08 Ninja 250R Candy Blue Posts: 151
|
yeah, I also wanted to know that. ride2max, how did you deal with the rear brake light cable? You said it had to be "adjusted", in what way exactly and how did you do it? pics would be great, and like kkim said, a list of what is included in this kit. Thanks for your time man! cheers!
|
|
February 27th, 2009, 05:15 PM | #47 |
That's me!
Name: TJ
Location: Ames, IA
Join Date: Nov 2008 Motorcycle(s): 2008 Ninja 250r (Tis blue), 2008 CBR600RR Posts: 454
|
Since you're literally moving the entire rearset, the master cylinder is mounted to the rearset and hence nothing to moves as the entire assembly moves. The hose will be a tad longer, but it shouldn't need shortening. As for adjusting the brake light (which again would not be needed by changing to the 'extender') it is simply adjusted up or down here:
|
|
February 27th, 2009, 05:34 PM | #48 |
ninjette.org member
Name: Michael
Location: Texas
Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 112
|
So nothing major i guess. thanks.
ride2max, any info on the paypal link. |
|
February 28th, 2009, 06:12 AM | #49 | |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Quote:
I know kk the shift rod seems to be my only inquiry. I dont care if it comes with or not. It would be nice to know.I guess even if it doesnt Im sure we'll all figure it out here. This does seem like a great idea. Fingers crossed |
|
|
February 28th, 2009, 08:15 AM | #50 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Can u guys pm me your email address with your full name and shipping address to me if u interested to buy this extender, so i can send u the paypal invoice for payment since i dun have my own website to add the 'buy now' button
|
|
February 28th, 2009, 09:23 AM | #51 |
忍者
Name: Jake
Location: WA
Join Date: Dec 2008 Motorcycle(s): None Now - Used to have an '08 Ninja 250R Candy Blue Posts: 151
|
ride2max - can do man! but first, I think many of us would like to know what all is going to be included in the kit. does it come with the shift rod? does it come with all the necessary hardware to mount the extenders? pics would be nice too! thanks for your time man!
|
|
February 28th, 2009, 09:59 AM | #52 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
The shift rod is come together with the extender, dun worry guys, i will included the screws, washers n a simple photo installation guide too. Regrading with the brake hose n brake light cable, same as VeX mention, u just need to adjust the brake hose on your liking if u dun wan to shorten it, for me i just make it look clean n neat. Same goes to the brake light cable, dun need to do any shortening as it can be adjust what shown from Vex photo or u also can adjust it under the rider seat, i will show it in the simple installation guide.
Here i show u a photo of clear view how it look like on the brake hose n brake light cable. Sorry for showing my dirty bike, when i riding home back from work, the sky suddenly rain. |
|
February 28th, 2009, 10:38 AM | #53 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Here are all the item included in the kit. If u guys want button screws, i will happy to provide it for u, just let me know. Cheers guys. Installation menu included too, sorry for not shown here coz havent ready yet, so sorry guys. There no need any extra or special tools to mount the extender, u can use your stock tools to do it.
|
|
February 28th, 2009, 10:39 AM | #54 |
忍者
Name: Jake
Location: WA
Join Date: Dec 2008 Motorcycle(s): None Now - Used to have an '08 Ninja 250R Candy Blue Posts: 151
|
sweet deal! I'm getting one! expect my pm soon...
|
|
February 28th, 2009, 11:00 AM | #55 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
|
|
March 1st, 2009, 12:50 AM | #56 |
Join Date: Nov 2008 Posts: Too much.
|
Just to let you guys know, I just placed my order. If you are on the fence about this, perhaps you would like to see how my transaction goes through and how the install is before you make a decision.
ride2max advises me the product will ship in few days after he cuts a set. |
|
March 1st, 2009, 09:53 AM | #57 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Thanks kaykay
|
|
March 5th, 2009, 06:14 PM | #58 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
They come in yet kelly?
|
|
March 5th, 2009, 06:27 PM | #59 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
hey ride2max I see you have a sportis hugger ,what do you think of it like the fit and ease of removing to clean the chain
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
March 5th, 2009, 07:28 PM | #60 |
Join Date: Nov 2008 Posts: Too much.
|
I just got an email from ride2max today saying he was going to ship them later this week.
|
|
March 7th, 2009, 08:41 AM | #61 | |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Quote:
Hi there, The hugger is nice but need to adjust the position on top the arm cover, so maybe u need to drill the holes longer to make it in the right position. For the arm cover it fit nicely without doing any adjusting. It dont need to be remove when u try to clean the chain. |
|
|
March 12th, 2009, 11:11 PM | #62 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
March 14th, 2009, 09:19 AM | #63 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Welcome Kelly, hope u enjoy the ride with the extender.
|
|
March 14th, 2009, 11:21 AM | #64 |
Join Date: Nov 2008 Posts: Too much.
|
Dennis, would it be possible to send 2 link rods with the kit with the second one being about 1/2" shorter than the present one? I could not use the bottom, forward most position on the plates due to the it being too long.
I'm sure it works fine with the other positions farther up, but it does not work for that one position. Even in the one I am using (lowest, farthest back), the link is at a very severe angle due to the length. |
|
March 14th, 2009, 12:20 PM | #65 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
No problem Kelly, i will send u the 2nd link rod shorter by 1/2" but would u mind giving some time to do it.
|
|
March 14th, 2009, 12:39 PM | #66 |
Join Date: Nov 2008 Posts: Too much.
|
Dennis,
Not at all. It was more of a comment on how the kit could be made better and was just trying to give my feedback to make it perfect. |
|
March 14th, 2009, 02:17 PM | #67 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
awesome. Thanks
|
|
March 15th, 2009, 12:01 AM | #68 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Kelly,
Thanks alot for your review and feedback so i can make it perfect. The 2nd link rod i will do it by next week and courier to you ASAP. |
|
March 15th, 2009, 07:40 AM | #69 |
ninjette.org member
Name: Simon
Location: Linden, NC
Join Date: Feb 2009 Motorcycle(s): 2009 Ninja 250R Posts: 81
|
hey sorry for the off topic post but were did u get that rear hugger?
|
|
March 15th, 2009, 07:53 AM | #70 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
|
|
March 15th, 2009, 08:40 AM | #71 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
hey ride2max i will be putting in an order shortly and how cool is that you are going to make a second link to a good guy
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
March 15th, 2009, 09:29 AM | #72 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Thanks alot bro, i will be waiting for your good news. I just want to make sure everyone happy with my extender, so i need to do improvement on it.
|
|
March 18th, 2009, 01:59 PM | #73 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Hello. Are you going to include another extender or revamp the design of the current one or thread it more then let buyers cut to length?
What type of metal are these made out of and whats the finish? Again great idea. Maybe it'll influence companys who make rearsets for this bike think about their prices a little harder. I've seen rearsets for other bikes cost way less. |
|
March 19th, 2009, 10:33 AM | #74 | |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Quote:
Hi bro, i will use back the same design. May i ask what do you mean by let the buyers cut to the length? The metal i using now is mild steel so coating can be done on it. If possible, i like to find distributors for my kits at US, so i can cut the cost on the material as i can do it on bigger production as well can cut the cost on the shipping fee. If anyone interest, can PM me for details. As for the link rod, i already design a new one that can fit all the settings. |
|
|
March 19th, 2009, 01:41 PM | #75 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
|
|
March 19th, 2009, 05:29 PM | #76 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
I see, thanks bro.
|
|
March 23rd, 2009, 11:24 PM | #77 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
The lastest batch of orders already been shipped out, i am sorry for abit delay on the shipment due to my work. The lastest batch of extender come with the rod that fit all the settings.
|
|
April 3rd, 2009, 10:46 AM | #78 |
ninjette.org member
Name: Cheng
Location: Malaysia KL
Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70
|
Here is the new shipping price for the extender using normal air parcel without tracking number is USD20
|
|
April 28th, 2009, 09:32 PM | #79 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
I'm going to ask you the same thing about this product as I did about your other one. Do you know if this fits pregens? Woodcraft says their rearset for the newgen 250 also fits the pregen, leading me to believe that the dims are the same... Any idea on the truth of this? Thanks and nice product, even if I can't get one.
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
|
September 20th, 2009, 09:31 AM | #80 |
ninjette.org member
Name: Steve
Location: Kansas city
Join Date: Aug 2009 Motorcycle(s): 94 Ex250 Posts: 101
|
I know this is old, but are these in production? How do you order? And can they be used for the pre-gens?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Skidmarx rear hugger and fender extender | Norway | 2008 - 2012 Ninja 250R Farkles | 9 | April 3rd, 2014 10:55 AM |
Good place to buy?(mirror extender) | Wade | 2008 - 2012 Ninja 250R Tech Talk | 17 | August 3rd, 2011 02:48 PM |
Anyone try this style mirror extender? | headshrink | 2008 - 2012 Ninja 250R Farkles | 12 | January 11th, 2011 10:17 PM |
Excellent DIY FootRest Extender (Rear Set) Install Video | g21-30 | 2008 - 2012 Ninja 250R Tech Talk | 0 | March 8th, 2009 07:39 AM |
|
|