Awesome farkles from Indonesia

[Aggrotech]

@Bob2010, @dfox, @akima @LNasty @VERSACE@ZackoFF96..some really cool stuff.
http://cyber-ninja250r.darkbb.com/t9...e-and-get-some

Believe the very bottom part means if you spend over 1million IDR you get 10% off.
----------------------------------

Tank Cover type A:

---------------------------

Tank Cover B:

-----------------------------

Tank Cover Type C

-------------------------------

Tank Cover Type D

--------------------------------

Tank Cover Type E

-----------------------

Rear Huggers
[IMG]
http://i1179.photobucket.com/albums/x385/graffityminimart/Bodyparts/IMG00019-20110605-1300_zpsf77de4be.jpg[/IMG]

-----------------------------

Undertails!

--------------------------------------

Undercowls!

--------------------------------

Front Fenders!

------------------

Headlamp Covers!

----------------------------

Reartail Replica M1 (Short)

-----------------------------

Reartail Replica M1 (Long)

-------------------------

Reartail Replica Ducati

-----------------------------------

Reartail Replica ZX

-------------------------------------

A-Tech Replica Fairings!

--------------------------

I have left out the front upper replica cowls, streetfighter fairings type 1 and 2 aaand the streetfighter engine cover. if anyone wants them i can add them

[NevadaWolf]

Argh, this would be so much easier if their photobucket wasn't private!

[Aggrotech]

Originally Posted by NevadaWolf

Argh, this would be so much easier if their photobucket wasn't private!

yeahhhh. i was bummed. i was going to put the kewl tank covers up as just a tease. Isnt all that hard to click the link and then the little hidden tab to show off the pictures though.'

the ducati tail farkle omgggg. specifically made for the carb 250!

[NevadaWolf]

I was able to get into the PB album but only the one image. I'd like to just scroll through.

I am INSANELY jealous of all the mods they have.

[Aggrotech]

Originally Posted by NevadaWolf

I was able to get into the PB album but only the one image. I'd like to just scroll through.

I am INSANELY jealous of all the mods they have.

prices seem to be pretty damn reasonable from what ive already converted. Can only hope the guy understands english as online translators fail!
ducduc tail and tank cover will look noice with my headlamp cover :O

[dfox]

mmm... streetfighter fairings look awesome. Type 1... that white bike is awesome.

[Bob2010]

I can't see or understand anything on that site
Ill save my suspense until the pics are posted !

[Aggrotech]

Originally Posted by Bob2010

I can't see or understand anything on that site
Ill save my suspense until the pics are posted !

They wont be as the links are fcked and only show up on that site.

just scroll down until you see big bold blu letters and click the "pict:" to show the pictures o.o

[boomer187um]

...hmmm not sure what you guys talking about, worked for me

just a few

[ZackoFF96]

You guys should really go to Indonesia if you want to mod your 250

there are lots of cooler stuff than those here. and they sell those pretty cheap, around 30$ for each tank covers.

[ZackoFF96]

Originally Posted by Aggrotech

Grand dragon master wizard over here.

Zacko ur from Indo right? Would you be able to possibly translate? Ive tried google translator with Hindi and Malay. Ive already messaged them over FB i'll hopefully see shortly if they know some english

Sure, i'll be happy to help. which part do you want me to translate ?

I can contact and text the seller too if you want

[LNasty]

prices are retarded! $400 for a tank cover!!!!!!! **** that!

[ZackoFF96]

@Aggrotech

i'll be back in a bit. i will translate the whole page for ya. i hope i can be better at english lol

[ZackoFF96]

Originally Posted by LNasty

prices are retarded! $400 for a tank cover!!!!!!! **** that!

who said that ? it's $30 each

[ZackoFF96]

Page translation :

-------------

We from graffiti mart wants to offer our products which are based on fiber materials.
In this thread we’re going to show products that are for use on Ninja 250R carbureted model.

Our products use quality materials, its for none other to give our best to costumers, not for quantity and money
* one example is the use of fiberglass mesh cloth
This part is the most important thing to make the products stronger, more flexible, and guarantee the finishing of the products.
* the material is rather expensive and the process takes a long time, that’s why not many manufacturers want to use this material
* for comparative purpose you can check the cheaper parts, they are rather weak and easy to break, and not as good as ours.
* the next point is PRECISION
* our products are handmade, which is why it’s very precise and can be use immediately to your bike.
* the last is coloring
* our product is carefully painted, therefore the tolerated color difference is about 5%, so you wont be able to differentiate our products and the originally made products.

-----------

yep that about sums it up

[LNasty]

Originally Posted by ZackoFF96

who said that ? it's $30 each

My bad, just saw that its in ruples

* Kondom Tangki Tipe A/B/C/D = IDR 400.000
* Kondom Tangki Tipe E = IDR 450.000
* Rear Hugger = IDR 400.000
* Undertail = IDR 450.000
* Undercowl = IDR 300.000
* Front Fender = IDR 300.000
* Cover Headlamp = IDR 175.000
* REARTAIL replika M1 (SHORT.LONG) = IDR 1.000.000
* REARTAIL replika DUCATI = IDR 1.200.000
* REARTAIL replika ZX = IDR 1.100.000
* FRONT UPPER COWL replika A-TECH = IDR 900.000 - IDR 1.650.000 (tergantung jenis lampu yang diaplikasikan)
* FAIRING replika A-TECH = IDR 1.700.000
* FAIRING STREETFIGHTER TIPE.1 = IDR 600.000
* FAIRING STREETFIGHTER TIPE.2 = IDR 700.000
* ENGINE COVER STREETFIGHTER = IDR 400.000

[LNasty]

I want the type C or E tank cover now. How do they stay on?

[Aggrotech]

I have no idea. I made an account on the forums to try and contact the seller but you need an admin to verify your account so who knows how long this'll take. Also messaged them on FB and on Yahoo. surely they will answer one of them!

[LNasty]

wonder what shipping would cost to U.S.

[NevadaWolf]

I'm liking the undertail. As long as it comes out cheaper than the hotbodies one, this poor guy may suddenly get a flood of orders.

[akima]

Originally Posted by NevadaWolf

I'm liking the undertail. As long as it comes out cheaper than the hotbodies one, this poor lucky guy may suddenly get a flood of orders.

Fixed!

[NevadaWolf]

Well yeah, that too!

[JohnnyBravo]

He is def right about the fiber-mesh... It is one of the stronger fiber products, and hand laid is the way to go... Their products look pretty crisp and on point!!! With the conversion rate I'd say as long as they ship a major carrier and your best friend doesn't love forming fiberglass you will wind up on the good end of the deal.

On fiberglass... You would be suprised at how many shops use none fiberglass products in their fiber products... I used to do door panels out of mostly or all felt and resin... Would be hard, and last, but was not the quality piece that I charged double or triple for out of mesh mat.
If it looks woven its good... You see nothing but strands going every way or something that doesn't look right, you may wanna study up on it... There may be a hood scoop made out of felt and bondo out there... But hey dude said cheap and to make it now.( the customer is always right) I hope it don't hurt nobody, an air catcher flying off at speed is nothing to trifle with!

[JohnnyBravo]

Originally Posted by ZackoFF96

i hope i can be better at english lol

Your English looks fine to me
I know plenty of folks that live here that use worse English, myself included some times

[Aggrotech]

Anyone else wanna try and see how they do? Still no response from any admins so i cant post or message anyone on the forums and the seller has not been on yahoo/FB.

[NevadaWolf]

Saw they have a twitter account but it's private and only showing 1 or so tweets so doesn't look like they are active there either.

Made it to the end of the original thread, it was bumped in August so someone is still around.

[VERSACE]

How to buy?

Thanks

[Aggrotech]

Originally Posted by VERSACE

How to buy?

Thanks

have been trying to contact the seller for the last day and a half or so. Will report back if i ever get a reply D:

they bumped a thread recently as a month ago surely they're still in business.

[ZackoFF96]

Originally Posted by Aggrotech

I have no idea. I made an account on the forums to try and contact the seller but you need an admin to verify your account so who knows how long this'll take. Also messaged them on FB and on Yahoo. surely they will answer one of them!

that forum sure is a pain in the back to register. i can text the seller if you want.

Originally Posted by NevadaWolf

I'm liking the undertail. As long as it comes out cheaper than the hotbodies one, this poor guy may suddenly get a flood of orders.

if you're ordering from here, they're about a half cheaper than the hotbodies

Originally Posted by JohnnyBravo

Your English looks fine to me
I know plenty of folks that live here that use worse English, myself included some times

thanks bro, that means a lot to me

[NevadaWolf]

Originally Posted by ZackoFF96

if you're ordering from here, they're about a half cheaper than the hotbodies

Yes, but then how much does the shipping company take?

I'm actually liking the undertail, the hugger, and the headlight cover....

[ZackoFF96]

guys i already contacted the seller and he said he can to deliver the goods by ship or by plane

so what about it guys ?

[NevadaWolf]

Originally Posted by ZackoFF96

guys i already contacted the seller and he said he can to deliver the goods by ship or by plane

so what about it guys ?

Oh what the hell, I want a unique look on mine.

It's coming out to just under $100 (1.025.000 IDR) for the three pieces i am looking at. Did he happen to say how much shipping would be? If I am allowed a choice, let's say by plane.

Since it's probably dependent on weight/volume, I'm wanting the headlight cover, the undertail, and the rear tire hugger.

I have the candy lime green 2012 bike. Your translation says the color match is about 5%. Could you translate the rest of this part for us?


* Untuk urusan warna ,biasa kita kategorikan di bagian pengecatan.
Di bagian ini lagi-lagi banyak case ,calon customer bertanya masalah warnanya sama atau tidak ..

Dengan senang hati saya jawab tidak ..
Karena untuk menghasilkan produk yg sama warnanya dengan parts lain di motor yg sama,hampir tidak mungkin dilakukan kalau tidak diguyur seluruhnya alias siram satu body ,,

Boleh tanya ke bengkel repair mobil atau motor,kalau cat ulang hanya salah satu panel pada mobil tsb (misal: bumper/kap mesin/dll) sedangkan yg lainnya tidak .. apakah mereka berani menjamin 100% tidak ada perbedaan gradasi warna ..
Udah pasti jawabannya tidak juga dari mereka,hehehe ..

Buat kita juga bgitu,sama 100% memang sulit dilakukan walau kita pun menggunakan bahan dan warna yg sama seperti original nya, di samping itu bahan yg kita gunakan juga berbeda,antara body ori dari plastik ABS sedangkan kita dari fiber' ..

Trus poduk kita belang dong warnanya kalau dipasang ke motor ?!
Kita punya tolensi gradasi warna antara 5-10% saja,jadi hampir sulit dilihat secara kasat mata kcuali anda perhatikan dengan detail dan mata melotot sambil membandingkan dengan tegas sama warna asli pabrikan ..

Jadi masalah warna sama atau tidak / warna belang atau tidak sudah saya jelaskan di atas yah ..

[Aggrotech]

Originally Posted by NevadaWolf

Oh what the hell, I want a unique look on mine.

Earlier you mentioned you liked teh headlamp cover. Check out my thread on that exact item, that i bought from Sportisi awhile ago.
http://www.ninjette.org/forums/showthread.php?t=112982
----
*edited first post* Hopefully these conversions are Accurate!

[NevadaWolf]

Originally Posted by Aggrotech

Earlier you mentioned you liked teh headlamp cover. Check out my thread on that exact item, that i bought from Sportisi awhile ago.
http://www.ninjette.org/forums/showthread.php?t=112982
----
*edited first post* Hopefully these conversions are Accurate!

I'd been seeing the Sportisi one and really liked it. These look almost identical which is why i'm interested. Ninja with bug eyes!

[Bob2010]

I wouldn't mind 2 under cowls and 2 huggers shipped to buffalo ny 14211

[NevadaWolf]

Oh, yeah, that would be helpful.

Shipping to Fallon, NV 89407

[Aggrotech]

Ducati tail in black
shipping to fresno california 93722

[BlownWideOpen]

I wouldn't mind a hugger and a front fender.

[ZackoFF96]

Originally Posted by NevadaWolf

Oh what the hell, I want a unique look on mine.

It's coming out to just under $100 (1.025.000 IDR) for the three pieces i am looking at. Did he happen to say how much shipping would be? If I am allowed a choice, let's say by plane.

Since it's probably dependent on weight/volume, I'm wanting the headlight cover, the undertail, and the rear tire hugger.

I have the candy lime green 2012 bike. Your translation says the color match is about 5%. Could you translate the rest of this part for us?


* Untuk urusan warna ,biasa kita kategorikan di bagian pengecatan.
Di bagian ini lagi-lagi banyak case ,calon customer bertanya masalah warnanya sama atau tidak ..

Dengan senang hati saya jawab tidak ..
Karena untuk menghasilkan produk yg sama warnanya dengan parts lain di motor yg sama,hampir tidak mungkin dilakukan kalau tidak diguyur seluruhnya alias siram satu body ,,

Boleh tanya ke bengkel repair mobil atau motor,kalau cat ulang hanya salah satu panel pada mobil tsb (misal: bumper/kap mesin/dll) sedangkan yg lainnya tidak .. apakah mereka berani menjamin 100% tidak ada perbedaan gradasi warna ..
Udah pasti jawabannya tidak juga dari mereka,hehehe ..

Buat kita juga bgitu,sama 100% memang sulit dilakukan walau kita pun menggunakan bahan dan warna yg sama seperti original nya, di samping itu bahan yg kita gunakan juga berbeda,antara body ori dari plastik ABS sedangkan kita dari fiber' ..

Trus poduk kita belang dong warnanya kalau dipasang ke motor ?!
Kita punya tolensi gradasi warna antara 5-10% saja,jadi hampir sulit dilihat secara kasat mata kcuali anda perhatikan dengan detail dan mata melotot sambil membandingkan dengan tegas sama warna asli pabrikan ..

Jadi masalah warna sama atau tidak / warna belang atau tidak sudah saya jelaskan di atas yah ..

sorry for the late reply

the seller didnt tell me about the shipping rates though

translation :

for color, it will be categorized in the painting section.
in this case, there are many consumer asking whether the color will be the same as the factory color or not.

Unfortunately, i will have to say no.
because, in order to make a product with the same color as you bike, its almost impossible unless you paint the whole bike.

you can ask your local painter, if you only paint 1 of the parts, not all of the parts, can they guarantee 100% no difference in the color ?
of course they will also say no, hehehe

this also applies to us, 100% same color is very hard to paint even though we use the same material and color like the factory color. other than that, our material is different too, factory use ABS plastics and we use fibers.

"so, the color wont be the same if we apply it to our bike?"
we have color gradation tolerance about 5%-10%, so it will be hard to differentiate. except if you actually look hard and try to spot the difference, and if you compare it with the factory color.

So thats it about color, as i already explained above

[ZackoFF96]

and about the shipping.

why dont you guys do GB ? send the goods to one place, then one of you guys send them to their respective owners ?

i think its cheaper than sending each of the goods directly to houses ?