April 2nd, 2011, 05:15 AM | #1 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
new red plastic part
just finished to change the oil at home when a friend from the kawasaki dealer came by with a new part that he showed me earlier in the day, which i had spontaneously decided to buy, lol
it goes down below the radiator, and i found that looks quite good (thus i bought it). the build quality seems to be really good, its made out of plastic with an injected mold (NOT FG), and fits really really well. you need to take the lower end of the bike faring plastic clip things off, and also remove the 2 lower bolts from the radiator. the piece slides in without much trouble. i removed the front wheel fender cos at first i couldn't figure out how to get it in at first, and i didn't want to bump and scratch it up due to the tight space. but its not actually necessary. the little plastic part that holds the bottom front end isnt long enough to hold all three layers of plastic together, so i found an old SS bolt that was a good size and used that quite pleased with the end result, it will stop flinging dirt at the exhaust pipes and engine block. the only drawback will be that each time i need to remove the bikes farings, ill have to take this off as well, which adds to the hassle somewhat... but ill survive im sure
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 2nd, 2011, 06:00 AM | #2 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Wayan
That looks good bro. Is that part kawi oem accessories or aftermarket |
|
April 2nd, 2011, 06:24 AM | #3 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
aftermarket i believe, the spare parts dood at the kawi dealer had it, they sell a mix of oem, and aftermarket parts at the dealer. not that much choice, but sometimes some interesting parts do appear.
this part cost half of what the FG bracket that i got for you. they have it in red, white, black, green and blue. the red on this one matches my bikes color very well. W~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 2nd, 2011, 08:27 AM | #4 |
ninjette.org member
Name: matt
Location: j.c. ny
Join Date: Oct 2010 Motorcycle(s): 08 ninja 250r Posts: 77
|
looks good ,where can i get one
__________________________________________________
Mother fuker! Are you out of your damn mind? |
|
April 2nd, 2011, 09:53 PM | #5 |
Shinobi Rider
Name: Seth
Location: McKinney, TX
Join Date: Feb 2011 Motorcycle(s): 2010 Passion Red Ninja 250R Posts: 79
|
I want and I need, more info please
|
|
April 2nd, 2011, 09:57 PM | #6 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
we could organise a GB, with the help of John, if he is interested to get one himself. i could ship a package over to him and then he can forward it over to the rest of you.
shipping cost can just be split between whoever many ppl decide to join in. about to go out for sunday lunch, ill discuss this later with john later
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 2nd, 2011, 10:10 PM | #7 |
Shinobi Rider
Name: Seth
Location: McKinney, TX
Join Date: Feb 2011 Motorcycle(s): 2010 Passion Red Ninja 250R Posts: 79
|
What was the US price for this roughly? If you don't mind me asking
|
|
April 2nd, 2011, 10:25 PM | #8 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
anything in white? im in if there's a white one for my 2011 ninja WE
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 2nd, 2011, 10:32 PM | #9 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Nice! I'd like to find something like that but a bit less angular and more like the lines already designed in the bike. Of course, we don't have any style of those available in The States.
That radiator cover looks like it blocks a bit more airflow than I'd be comfortable blocking in warm weather. I'd rather install hex mesh than a perforated sheet (a bit closer to wire mesh but at least with a little more protective ability). |
|
April 3rd, 2011, 02:28 AM | #10 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
I want one in kawi green
|
|
April 3rd, 2011, 02:57 AM | #11 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
well, lets start a GB, like i said before, the colors that are available are:
Red, Blue, White, Black and Green. not sure which blue it is... could find out if someone wants blue. i would need someone on the American side to handle the domestic shipping on your end, since it will cost you less to ship them all in one package from Bali to the States, and then send the individual parts over there to each of the buyers. i suggested John, since ive shipped a part to him already, which arrived, and i guess its someone i can say i trust shipping cost can be split between the buyers, i can not give a cost for that in advance, since i dont know how many i will need to send. the package i sent to John in Huston cost like $ 45 or 50 by registered post (air-mail, 7~10 days). so if the package is bigger it will cost more, but then it will be split by all of you guys, so it should cost less. the actual plastic part costs about $35 (depends how many ppl will get it i might be able to get a better price from the supplier). list of ppl interested~ name & Color that you want: 1: ride2rideagain - Green 2: sarapacman99 - White 3: Dat_Ninja_There - Red (is the 2010 red the same as the 08~09?) 4: blade - ? 5: bob706 - Black 6: randomwalk101 - White 7: Lvr - Black 8: just added names of who showed interest, i can edit, add, and remove, just wanted to kick start a list, lol no set date yet and no set limit, lets see who is interested and work from there. W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield Last futzed with by wayanlam; April 3rd, 2011 at 09:54 AM. |
|
April 3rd, 2011, 05:50 AM | #12 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Interested in a black one.
|
|
April 3rd, 2011, 08:58 AM | #13 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
I don't mind getting bulk & mail it out for you guys. I'd like to get a white one myself. Thanks
|
|
April 3rd, 2011, 09:29 AM | #14 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
For $35 + shipping, I'll definitely take one in black. Count me in!
|
|
April 3rd, 2011, 09:39 AM | #15 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
I just wanna say, this Ninjette community is awesome. I've been to other forums from other various things but none as helpful as everyone here.
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 3rd, 2011, 10:07 AM | #16 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ill update the list down here, so i dont have to keep searching for it up there~
current Price: $35 + shipping both John and i have PayPal, so for the parts + Bali to Huston shipment would go to me, and then the cost for shipping over there would need to be sent to John. tomorrow ill start finding out how long it would take me to order these. ill confirm that i can get them all before i accept any payments. I don't want to end up stranded without these parts after having received payments, lol im splitting the list into 2, one for the maybes and one for those who seem to want it. the Ok-Go list: 1: randomwalk101 - White 2: Lvr - Black 3: bob706 - Black 4: ride2rideagain - Green 5: sarapacman99 - White 6: the Maybe List: 1: Dat_Ninja_There - Red (is the 2010 red the same as the 08~09?) 2: blade - ? 3: CZroe - just get this one 4:
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 3rd, 2011, 10:09 AM | #17 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
is the white one compatible with my 2011 white ninja? just asking
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 3rd, 2011, 10:28 AM | #18 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ill ask tomorrow, i only saw the black and red ones in person. i would assume it is, since they have the 2011 white ninjas at the showroom where im buying this part from.
im just not sure about the red, for the 08~09 compared to the 2010+ and the blue, there might be 2 blues (candy blue, and another maybe)? im not so sure... the red that i got matches spot on with my 08~09 Red.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 3rd, 2011, 10:40 AM | #19 | ||
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
I do want one but I want it without all the slots so I can install my own mesh. Actually, just the top piece across would work for me. I need to save money anyway, so I can't really afford it. If they have some damaged ones for cheap, I may still be interested. Also, a suggestion: Many of our members are concentrated in southern California (Los Angeles, San Diego, surrounding areas) due to the year-round riding season and popularity of bikes in this area. If a bunch of them hop on board, it may make sense to ship there where many could pick it up locally without additional domestic shipping. Quote:
'09: CT blue '10: MI blue All different. |
||
|
April 3rd, 2011, 10:41 AM | #20 | |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
Quote:
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
|
April 3rd, 2011, 11:01 AM | #21 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
This is all I really want as far as covering the fairing opening:
fairing_cover_modified.jpg I think it would close things up enough for me to cleanly install some mesh. I do want to get a small triangle of CP blue plastic to put over my brake light to make the Sportisi undertail match the Hotbodies one (I think it fits the style of the bike perfectly). Yup. That too. |
|
April 3rd, 2011, 11:39 AM | #22 |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
I'm in for sure! Any color is fine as it will be painted anyway..
__________________________________________________
busastampede.com |
|
April 3rd, 2011, 11:45 AM | #23 |
ninjette.org member
Name: matt
Location: j.c. ny
Join Date: Oct 2010 Motorcycle(s): 08 ninja 250r Posts: 77
|
ill take one in green for sure, but it would have to be shipped , i live in ny
__________________________________________________
Mother fuker! Are you out of your damn mind? |
|
April 3rd, 2011, 05:50 PM | #24 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Expect about another $20 shipping/Paypal fee for shipping from my place to where you are (on average). Canada may be more.
I will refund the extra $ if s/h is less after I ship your items to you. |
|
April 3rd, 2011, 06:16 PM | #25 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
the Ok-Go list:
1: randomwalk101 - White 2: Lvr - Black 3: bob706 - Black 4: ride2rideagain - Kawi Green 5: sarapacman99 - White 6: DR1300R - any color 7: blade - what color? 8: the Maybe List: 1: Dat_Ninja_There - 2010 Passion Red (id have to check if they have that...) 2: so who in Cali wants to be used as the stop over / drop off? shipping and/or organizing a pickup to the rest of the GB from there would then be your responsibility. so far it seems like we have 7 people that have basically confirmed at this point. it will be up to the collective voice to decide when and where it gets shipped. my homework now is to find out how long it will take me to order 7~10 of these. i will have to buy all of these in advance and then have them packed and brought to the post office to find out the shipping cost before i will ask for money from you guys. so please make sure that if you confirm, that you will buy this. otherwise ill be left here with extra pieces, lol... im in the furniture business, this GB for the bike is just to offer you guys something that might not be available over there. im giving this basically for cost price, and just adding a couple bucks to cover exchange rates. so don't leave me hanging please ill also compare the shipping price with a DHL parcel, which is 3 to 5 days shipping, compared to the 7 to 10 days with the express post, and you guys can decide what you want me to ship with. back to work now, W~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 3rd, 2011, 06:25 PM | #26 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i just checked, we only have the standard red (the 1st red that came out, i guess, the 2008 model).
we did not get a different red selection to choose from here in Bali, nor the rest of Indo. i believe. for the 2x white, 2x black, and kawi green, i can get within 2 or 3 days i think. so for DR1300R i'll get white, since that's an easy color to paint over. for blade, im still waiting on his choice of color
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 3rd, 2011, 06:32 PM | #27 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
DHL prices to LAX / Cali:
Jumbo Junior (41 x 35 x 25 cm) max 10Kg = $186 Jumbo Box (48 x 52 x 32 cm) max 25Kg = $287 im not sure how many i can fit in either of these, but at least we have a price already. so currently, if i can fit all 7 in the junior box for $186, divided by 7, that's like $27 each, which isn't too bad. shipping by airmail / the post, will cost less im sure. but i wouldnt know the price till after i pack them and bring it to the post office. PS. if there is extra space in the box i could theoretically send other small stuff too if anyone is interested. i wouldn't know what, but for example, clipons, or rearsets, feel free to ask, and who knows, i might be able to find it for a reasonable-er price here.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 3rd, 2011, 07:00 PM | #28 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
i can wait for the white part
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 3rd, 2011, 07:01 PM | #29 | |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
Quote:
__________________________________________________
busastampede.com |
|
|
April 3rd, 2011, 07:11 PM | #30 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
if you could get a list together (item and price) that would be appreciated.
|
|
April 3rd, 2011, 09:03 PM | #31 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
yey, the forums are working again!
Quote:
please note that besides sending pictures of the product, i cant really take responsibility for it in the long run. i mean this plastic part is straight forward, nothing can go wrong (besides the package going MIA, lol). but if i were to, lets say send something else, thats a little more mechanical (such as rearsets?) and they dont work as you expected, i cant really do anything from my end. im happy to offer this plastic part because its made by an injected mould, so i know that it should fit your bikes, since it fits mine perfectly. and im not worried that they might not work on your bikes over there. however i cant guarantee/vouch for other parts that i haven't tried out myself yet.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
April 3rd, 2011, 09:08 PM | #32 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Sorry about that. They were doing a networking upgrade at the data center, and didn't expect for things to be down as long as they were. All should be well at this point, and if anything, things might seem slightly more responsive.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
April 3rd, 2011, 09:15 PM | #33 |
ninjette.org certified postwhore
Name: dino
Location: Oceanside, Ca
Join Date: Nov 2010 Motorcycle(s): '09 250 Street, '09 250 Race, '13 300 Race Posts: A lot.
|
Is this a Decepticon or an Autobot? I need to know if I put this on my bike, its going to protect me from Megatron or is it going try to kill me.
|
|
April 3rd, 2011, 09:16 PM | #34 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
i would like to know prices for a GP Cowl and a rear hugger from sportisi
http://www.sportisimotorsport.com/ni...accesories.php thank you! p.s. and if they have anything in white, i only saw black as the closest thing i can use on my white ninja. thanks again!
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 3rd, 2011, 09:45 PM | #35 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Wayan
Thanks for doing this. I recommend you collect money first in case people back out and you're stuck with extra pieces. I've seen it happened with GB before. People tend to be more committed when it's paid lol. Also you can talk to matt to see which shipping method he used. He ships stuffs for sportisi all the time. |
|
April 3rd, 2011, 09:48 PM | #36 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
do we do paypal or bank transfers?
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 3rd, 2011, 10:04 PM | #37 |
Shinobi Rider
Name: Seth
Location: McKinney, TX
Join Date: Feb 2011 Motorcycle(s): 2010 Passion Red Ninja 250R Posts: 79
|
Put me down for a red one
|
|
April 3rd, 2011, 11:18 PM | #38 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
regarding payment method, yes, Paypal works, since that seems to be the easiest and cheapest method to transfer. international bank transfers always eat up 5~15 buks per transaction, and that's a bit of a waste of money. the issue with requesting money in advance is that i don't know how much it will cost to ship until i have all the parts, packed and then brought over to the post, or see in which DHL box it might fit. i could ask everyone to pay the $35 up front for the part itself, and then the rest for the shipping later when i get a price, but that would end up being a whole heap of transactions, and i would like to keep it as simple as possible. i think i get charged for every paypal to Credit card transaction that i do. meaning that more money gets smoked, lol i helped John (randomwalk101) get a part from bali last month, and he sent me the total $ (for the part and shipping) once had it packed and weighed by the post office. iddealy i would like to do the same thing, but as he pointed out, i have the risk that someone might pull out after ive bought the part and am about to ship it if you ask me how much it costs to send a container to LA, i could get you a price in 5 minutes, but for these parts i don't know what the total size / weight will be once we decide to ship them all. personally i would like to use DHL, since i have a company account with them and i know that we can track it, and it wont get lost. now that there are maybe eight ppl in on this, the shipping cost should not be that expensive anymore once divided by so many. also we have not elected a person in CA that will take on the responsibility of receiving the package and redistributing them. someone needs to prepare some straws to pull on, who gets the short one gets to receive the package, hehehe the Ok-Go list: 1: randomwalk101 - White 2: sarapacman99 - White 3: DR1300R - White 4: Lvr - Black 5: bob706 - Black 6: ride2rideagain - Kawi Green 7: Dat_Ninja_There - Red (2008 Red) 8: blade - color? still want one? 9: so far: - 3x white - 2x black - 1x green - 1x red - 1xTBA. not bad considering i only posted this on Saturday and initially just intended as a DIY, lol cheers, W PS, this is definitely a Decepticon you can almost see their logo embedded in it!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
April 4th, 2011, 12:24 AM | #39 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
Hey guys, don't count me in, I did say I want one before the group buy started, but it looks like it'll be $35+about $25 shipped to Canada, if not more. I think I'll sit this one out as its more of a cosmetic mod. Sorry.
|
|
April 4th, 2011, 12:33 AM | #40 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
aww, too bad.
we still have time to get more to join, there is no time limit. its every ones call to decide to fix a date. im just along for the ride updated list: 1: randomwalk101 - White 2: sarapacman99 - White 3: DR1300R - White 4: Lvr - Black 5: bob706 - Black 6: Dat_Ninja_There - Red (2008 Red) 7: blade - color? still want one? 8: the more the merrier! i need to take more pictures of the bike and then it might convince more to join, hehe if the USD wasnt so weak, this item wouldnt cost as much. last year 1USD = 12.000 Rp, currently its down to like 8.700 Rp to the dollar. meaning the $ de-valuated almost 30% to the Rp's... cant do much about that though, we can blame the global economy for that, lol
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[kropotkin thinks...] - Memory Lane, Part 2: Red Bull US GP At Laguna Seca, By Scott | Ninjette Newsbot | Motorcycling News | 0 | December 30th, 2009 08:50 AM |
|
|