April 2nd, 2012, 03:39 PM | #1 |
ninjette.org member
Name: Drew
Location: Canada
Join Date: Nov 2011 Motorcycle(s): '10 250R SE Posts: 79
|
Reducing noise on Two bros Slip on?
Hey guys,
so I have a little issue with my muffler! The stock one is too quiet, and I feel my two bro's slip on is TOO LOUD, more so at the lower rpm/idle range. At higher rpm's on the street I dont mind but when coming into a residential area, it seems a tad bit loud to me. Is there any way to make it a bit quieter? I dont really care for the super deep low rumble, I actually think it makes the bike sound more like a truck than a sport bike =\ , I read those two bro's silencers dont really make a difference? or do they.. Any suggestions?! thanks in advance guys
__________________________________________________
[2010 250R SE] |
|
April 2nd, 2012, 03:46 PM | #2 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
They don't really make a huge difference, just change the tone slightly. They do get rid of some of that low rumbly-ness though. You might like it. Borrow someone's and test it out
|
|
April 2nd, 2012, 05:34 PM | #3 |
ninjette.org member
Name: Andrew
Location: Michigan
Join Date: Mar 2012 Motorcycle(s): Red 2009 Ninja 650r Posts: 209
|
Sell the two bros to me for cheap and put the stock one back on...
|
|
April 2nd, 2012, 05:38 PM | #4 |
ninjette.org member
Name: Drew
Location: Canada
Join Date: Nov 2011 Motorcycle(s): '10 250R SE Posts: 79
|
^ haha, at first I was considering it but the stock is too quiet but the weight savings on the can is very favourable
__________________________________________________
[2010 250R SE] |
|
April 2nd, 2012, 11:58 PM | #6 |
ninjette.org member
Name: Drew
Location: Canada
Join Date: Nov 2011 Motorcycle(s): '10 250R SE Posts: 79
|
^ Turns out there is , they offer a P1 tip which is a ~3-4 DB reduction, and a P1X tip which is about 7-8 DB reduction..
only problem is Im not sure if the P1X tip will fit the application , hopefully it does because I think I will be ordering one soon!
__________________________________________________
[2010 250R SE] |
|
April 3rd, 2012, 07:37 AM | #7 |
ninjette.org member
Name: Andrew
Location: Michigan
Join Date: Mar 2012 Motorcycle(s): Red 2009 Ninja 650r Posts: 209
|
|
|
April 20th, 2013, 01:15 PM | #8 |
ninjette.org member
Name: Eric
Location: Etters pa
Join Date: Mar 2012 Motorcycle(s): 09 ninja 250,93 vulcan 750 Posts: 92
|
the tips helped alot for the old gen
so I would imagine it would work on the new gens |
|
April 20th, 2013, 01:32 PM | #9 |
crash 250, get supersport
Name: Richard
Location: San Diego, CA
Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.
|
threaddddddd necrooooooo.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two bros slip on FS | sharky nrk | Motorcycle-related | 10 | June 5th, 2014 10:15 AM |
Reducing the noise of an aftermarket exhaust ? | Noobman | 2008 - 2012 Ninja 250R Tech Talk | 10 | May 23rd, 2013 06:27 AM |
Bros Aluminum Slip On | illrational | Motorcycle-related | 6 | March 11th, 2011 07:35 AM |
two bros slip on | tylerdurden119 | 2008 - 2012 Ninja 250R Tech Talk | 5 | May 20th, 2009 04:35 PM |
[webbikeworld.com] - Blockade Noise Reducing Earbuds Review | Ninjette Newsbot | Motorcycling News | 0 | May 2nd, 2009 03:25 AM |
|
|