June 21st, 2010, 09:31 AM | #1 |
ninjette.org member
Name: Dave
Location: Newbold, Philly
Join Date: Apr 2010 Motorcycle(s): 09 Ninja 250r Thunder Blue Posts: 15
|
150/60/17 Rear tire
So I want to hear the options of people who have actually rode with a 150/60 17 rear tire.
I already bought a set of Mich Powers so before I install it and see for myself I want to hear others who have tried it. I know that racebikerentals.com uses this size and they go thru tires all day. I did a lot of research and only hear bad things from it from people who have never rode or install them and good things from people who have installed them. Let's get facts. Thanks! |
|
June 21st, 2010, 10:17 AM | #2 |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.
|
|
|
June 21st, 2010, 10:29 AM | #3 |
ninjette.org member
Name: Dave
Location: Newbold, Philly
Join Date: Apr 2010 Motorcycle(s): 09 Ninja 250r Thunder Blue Posts: 15
|
Thanks for the link.
Is $40 per tire a normal price to swap out tires? Anybody recommend a place in Philadelphia to swap tires and balance? |
|
June 21st, 2010, 11:02 AM | #4 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Should be about $10-15 / tire if you bring them the tire
Posted via Mobile Device |
|
June 21st, 2010, 02:44 PM | #5 | |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.
|
Quote:
To find an installer, go to this link and enter your zipcode: http://www.motorcycle-superstore.com...Installer.aspx |
|
|
June 21st, 2010, 02:49 PM | #6 |
Join Date: Nov 2008 Posts: Too much.
|
yep, I'm finding that a very handy feature that I bet most don't use. I wonder if Alex could move that feature to the top of the thread instead of out of sight on the bottom. Alex?
|
|
June 21st, 2010, 04:14 PM | #7 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I think it's useful as well! But I'm wary about moving it too far upwards on the page. While it's important, it shouldn't take screen real estate from the thread you're on itself. With smaller laptop screens, folks would have to start scrolling down to start seeing even the 1st or second post in the thread.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 21st, 2010, 04:18 PM | #8 |
Join Date: Nov 2008 Posts: Too much.
|
I agree. How about immediately after the last post in the thread... before that ad.
|
|
June 21st, 2010, 04:29 PM | #9 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
OK - it's moved up about as far as it can go. Need to leave it after that ad, turns out that ad location is the most successful, by a very wide margin, compared to every other location on the site. Can't explain why, but I'm not going to mess with it. The similar threads are now directly below it, trumping even the quick reply box. Let me know how this works for awhile...
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 21st, 2010, 04:31 PM | #10 |
Join Date: Nov 2008 Posts: Too much.
|
Thanks for being open to change. You Rock!!
|
|
June 21st, 2010, 04:35 PM | #11 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
No problem. Some things are easy, and some things are hard. Sometimes it's not easy to tell the difference externally. Moving existing items around on the page isn't too challenging, and is easy to move back if we change our minds. It's just editing a template rather than any particularly involved coding challenges. Hardest thing is to just make sure the spacing didn't get messed up.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 21st, 2010, 06:03 PM | #12 | |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.
|
Quote:
Just thought I would bring this link back to the forefront, since onepeon did ask for installer info. I too, do like the new location of similar links. Thanks Alex. |
|
|
June 27th, 2010, 06:58 PM | #13 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
I remember that thread (post #2) I started way back in the day....certainly helps to reread it.....
Months later---still as happy as a clam with my decision.....as stated before I love the 120/150 set up--I've had zero problems with it AND I just got back from a 280 mile trip-lots of freeway action...once again PERFECT..... Let me know how it goes for you--love to see some pics of your tires |
|
June 27th, 2010, 07:57 PM | #14 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Other than crashing the bike with them the first time you took them to GMR after install.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 27th, 2010, 08:02 PM | #15 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
June 27th, 2010, 09:18 PM | #16 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
I have a short memory when it comes to low siding but it wasn't the tires that did any of that....coincidence
I've spoken to a few others that have the 150 set up and have read endlessly about it and many riders feel the same way as I do....I guess the best tire is what you like or prefer...many race with the 150 in the rear and love them as much as I do... some argue that this set up is unsafe and that a 140 in the rear is the largest option........I personally DO NOT think my rear had anything to do with low siding as I have been up in the canyon many....many...many times and have leaned her over many many times--again and again.....when I think back my low siding...it was due to gravel in my turn....and since have done that turn probably 50 times now with no ill effects....so going back to the question of who's ridden with them and is using them right now...I am and I enjoy them.....plus they look sexy hott unlike the 130 ten speed tire.... |
|
June 27th, 2010, 09:35 PM | #17 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I dunno, I just wish that all the facts were on the table when you describe your experiences with that set of tires. Heck, even the OP is up for that:
No matter how much better you think they are performing, they couldn't keep the bike from lowsiding, right? There's a thread up here with several posters warning how the profile of your rear tire with the 150/60/17 003RS was *way* off based on the picture you posted, and it worried me; your crash soon after in some ways seemed to validate that concern. 120F/150R with the 003RS's seem to be a questionable idea for this bike on the street. 110F/140R for the 003RS's are a safer and better-performing option, while by many accounts 110F/150R on the BT-016's work pretty well as the 016's are narrower than the 003's.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 28th, 2010, 12:21 PM | #18 | |
oh yes it is!
Name: :D
Location: Missouri
Join Date: Jun 2010 Motorcycle(s): 2010 Ninja 250R SE - SOLD 2004 CBR600RR Candy Blue (sportech wind Screen / OEM Sliders) Posts: 56
|
Quote:
here's my fact: i have issues when making turns (let say cornering at speed of 40mph+) i feel like i'm riding on a wet road, slippery. maybe because it was brandnew. |
|
|
June 28th, 2010, 05:31 PM | #19 | |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
Quote:
|
|
|
June 28th, 2010, 08:12 PM | #20 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
For example, try out a 140/70/17 003RS on the rear next time and let us know why it performs better, or worse, than the 150's in the 003RS. Or as you suggest, compare it the BT-016's in the 150/60/17 size, which are significantly smaller than the 003RS's. Tell us how the bike behaves more predictably at the limit with a particular tire combination. Tell us how you dropped 3 seconds a lap with the new setup. Tell us how it wears more evenly and lasts 20% longer. Tell us how it rides better with more damping on sharp-edged bumps. Or even, do exactly as you've done here and state that you have 'em, you like 'em, and you're getting them again. That's a data point that our members can evaluate for themselves, and the more data points like that the better. I like the intent of this thread, and the more experiences that more of our members share with their different tire setups, the more information each of us will have to play with.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
June 28th, 2010, 08:54 PM | #21 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I just realized that in this entire thread, there hasn't been enough mention about which particular models of the 150/60/17 we're all talking about. While a denoted size alone should represent the size of a tire, it turns out the actual dimensions can vary quite a bit. Richard's rental racebikes typically use the 150/60/17 of the Bridgestone BT-016's. That size is the smallest Bridgestone makes for the 016's. The profile seems OK, and is not as pinched as someone might expect; it appears to be a "narrow" 150, is the best way to describe it. The 150/60/17 in some other tires, even from the same manufacturer, have different actual sizes. The Bridgestone 003RS in a 150/60/17 appears much more pinched on the rim, with the profile affected much more than is noticeable on the BT-016's. The good news is that if you want a race tire, the 003RS is available in a 140/70/17, which fits our rims a bit better. There are varying reports about other models with the 150/60/17 size, from Pilot Powers to Diablos and others. Some of the fastest 250 racers (2:08 at THill, you kiddin' me??!!) are using the Pirellis.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 28th, 2010, 09:19 PM | #22 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
Well Alex- I may give the Pirellis a try...do they come in a 150? I'd love to hear what others are using and the type of tires as well. You have many valid points as far as the Bts go--I value them and may try the 140 next time around just to see what it's like compared to the 150.
|
|
June 28th, 2010, 09:24 PM | #23 |
Join Date: Nov 2008 Posts: Too much.
|
I have one ride on a 150/60 bt016 rear tire. haven't pushed the tire due to it not being fully scrubbed in yet, but my initial reaction is that coming from a 140/70 bt090, the bt016 rides smoother, but feels a bit slower turning in corners, which I expected. So far, I like the tire and can live with it until it wears out.
Last futzed with by kkim; June 29th, 2010 at 12:26 PM. |
|
June 28th, 2010, 10:49 PM | #24 |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
I run the BT016 in 150 and love them. I might switch to the 003RS in 140 but I hear those do not last as long so I decided to go with the BT016 for now.
|
|
June 29th, 2010, 05:30 AM | #25 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
June 29th, 2010, 12:27 PM | #26 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
June 30th, 2010, 10:10 AM | #27 |
ninjette.org member
Name: Jerry
Location: Ontario, Canada
Join Date: Jun 2009 Motorcycle(s): 09 EX250 LE Posts: 117
|
The Pirellis Sport Demons come in 150/70/17. I have a 130/70/17 installed on my bike and it performs great for most days.
I notice that I get pushed around a bit more in strong winds even compared to the stock 130 tires but in the twisties, the Pirellis are in their element. On the stock tires, I can sometimes feel the rear sliding slightly when I run wide into a corner and have to lean more / accelerate harder to make it out. The Pirellis, once they heat up a bit are like glue! Even in the wet, I have never had them slip or slide on me under any circumstance. So the tires themselves are definitely made of good stuff. As for how well the 150s are, I couldn't tell you. |
|
July 2nd, 2010, 12:11 AM | #28 |
ninjette.org Monkey Spank
Name: Kevin
Location: Illinois
Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.
|
Bt-16 150/60 on the rear and love it. Had NO issues at the track with this tire. Gives AWESOME grip. Good price, and lasts a long time. What more can you ask for?? The leap from GT501 (which I lowsided on due to lack of grip among other things) to BT-16 resulted in over a 2 1/2 second improvement in lap times.
I love bt-16 tire, I run them on my FZ at the track with good results.
__________________________________________________
Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket |
|
July 2nd, 2010, 08:35 AM | #29 | |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
Quote:
|
|
|
July 3rd, 2010, 01:09 AM | #30 |
ninjette.org Monkey Spank
Name: Kevin
Location: Illinois
Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.
|
heres a pic of the "pinch" on the rim.
You can see that it is pinched a little and therfore you cant scrub off the rubber all the way to the edge of the tire. The tire itself doesnt look that much bigger than the stock 501's that came on the bike. The improvement in lap times tells the tale. Dont buy this tire if your looking for the "fat" rear tire look. You will be disappointed. If you want a adhesion improvement this tire is for you.
__________________________________________________
Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket |
|
July 3rd, 2010, 09:28 AM | #31 | |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
Quote:
Mine looks exactly like that--I thought the BT016 didn't pinch as the BT003s--but there it is. I don't think this affects the way the tire functions as I've had mine on for 3000+ miles.....but some would argue otherwise. I wonder if the BT045 150 pinches this way? Anyone have one on their ride that can post a pic? |
|
|
July 3rd, 2010, 12:39 PM | #32 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
I ordered a set of BT-016 (110/70 and 150/60) front/rear and currently sitting in my closet waiting fo this stupid GT501 to wear out so I can put them on.
I love the BT016..feel so smooth on the road, much more confidence in turns, so well planed compared to the 501...oh wait da minute..these are for "later" |
|
July 3rd, 2010, 01:44 PM | #33 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
My rear 150 BT003.....my pinch resembles the BT016 pinch where the sidewalls will never get used...
|
|
July 3rd, 2010, 03:26 PM | #34 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I want to make sure we're on the same page in terms of what people are telling you about "pinch". Pinch does not mean that you can't get to the edge of the tire. It just means that the tire is too wide for the rim, causing weirdness with the tire profile, different stresses on the tire that it wasn't designed for, and unpredictable results. Here's the 016 in 150 width that almost40 posted up:
Look at the red angle. This is how much the tire had to be pulled in to fit on the rim. It looks more than some tires, but not extreme. The edge of the tire's contact patch (in green) does start to look pretty steep, and likely isn't completely usable, but it's still an arc from the center of the tire all the way to the edge. Here's the 003RS in 150 width that you posted up: Look at the red angle, and see how far the tire had to be pulled in to fit on the rim. The angle is much steeper than on the 016. To the point that it will cause weirdness with the profile as the tire is mounted. That's one of the reasons that you and Mike noticed that waviness in the tire when it was new. And it's one of the reasons that the wear pattern isn't even, just by looking at the edge of the tire that you've used. Look at the areas near the blue arrows, showing how the wear pattern gets wavy at the same lean angle. Tires shouldn't look like that. It's a clear indicator that the contact patch is getting weird while you're leaned over.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
July 3rd, 2010, 04:05 PM | #35 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
I see what you're saying Alex- never disagreed with you about the waves produced or the pinch.....
Looking at the BT016-I didn't think it would also have that mini sidewall (in green) you pointed out...I'm guessing any 150 is going to do this? What do you think? Maybe one day you could come down south--drive my Ninja and tell me how the tire feels to you? |
|
July 3rd, 2010, 04:15 PM | #36 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I wouldn't stress about that area that's unused (the green part). Depending on particular tires and the way particular bikes are set up, sometimes the usable part of a tire isn't all the way to the edge, even with hard parts of the bike dragging along the road.
I don't know whether any 150 would also have a similar unusable area, but perhaps. I'd be curious to see what one of Richard's rear tires look like before they are taken off the racebikes.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
July 3rd, 2010, 04:20 PM | #37 |
Join Date: Nov 2008 Posts: Too much.
|
I believe Richard has mentioned before that the 016 tires he used on the ninjette were not able to use that last bit of tire. I guess he's so much of a noob, yo, that he's not able to heel the bike over to use all of it.
Chicken strips... how unsightly. |
|
July 5th, 2010, 10:11 AM | #38 |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
Yes, Richard did mention that the 016 will have chicken strips but the 003 in 140 form will not have any.
|
|
July 5th, 2010, 07:40 PM | #39 |
ninjette.org Monkey Spank
Name: Kevin
Location: Illinois
Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.
|
If Richard can wear a BT-16 to the edge then hes my Hero. I dont see it as possible. My front tire is worn all the way to the edge but its the stock size. You would run out of front tire long before you got to the edge of the rear on a BT-16. Of course you might scuff up the edge of the rear while your bike is sliding on its side down the track
__________________________________________________
Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket |
|
July 6th, 2010, 11:13 AM | #40 |
ninjette.org member
Name: Neville
Location: MALTA (EU)
Join Date: May 2010 Motorcycle(s): ninja 250, vespa gts 300 Posts: 19
|
I run my 250 on a 150/60 rear and a 120/60 front, both soft compound Contis - prefer it that way and not just aesthetically. It's not so twitchy and I feel I have more control round corners.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
150/60/17 rear tire do i need to change the front | brownninja | 2008 - 2012 Ninja 250R Tech Talk | 11 | April 9th, 2014 10:50 AM |
150 Rear Tire | TheJimmyEnglish | 2008 - 2012 Ninja 250R Tech Talk | 27 | August 4th, 2011 09:58 PM |
150/60 REAR Tire Upgrade! | SilentNinja | 2008 - 2012 Ninja 250R Tech Talk | 60 | June 4th, 2011 10:26 PM |
WTB: 150 rear tire...;) | Plasma | Items Wanted | 0 | October 3rd, 2009 04:09 PM |
|
|