SHINTO Group Design Thread

ThaiNinjaRR · March 31st, 2010, 03:30 AM

Ok, so i am sitting here Designing new items to make..when i had an idea....
Why not let you guys have a say in the Design....
I know what i like, but how many times have you said."i wish it..."

Well here is your chance...

Today i will say, lets Design a Front Oil Filler Cap (to replace OEM)

Of course, the colors are of no importance, as you know, i will make all the colors..

so just give me your feedback, your ideas, your "that would be nice"..
and the finished product will be Produced!..
Well, it will be made if its do-able...lol... i cant make a oil filler cap that has complete NHL team playing hockey.. so be sensable with your ideas lol..

OK...here is a blank cap i just mocket up, the sizing is not correct, its just somthing for you guys to get an idea..
The sides will have Shinto Racing Accessories (as shown)

Hope this works, and if it does, i will do more!!!

ThaiNinjaRR · March 31st, 2010, 03:30 AM

kenji_808 · March 31st, 2010, 03:39 AM

NICE!!!

i would be down for this, it would be even better to make a package deal with the rear reservoir cap and oil filler cap all together

ive been planning on getting some but its hard to find a company that make all 3, since anodizing creates different shades of the same color
Posted via Mobile Device

ThaiNinjaRR · March 31st, 2010, 03:43 AM

Quote:

Originally Posted by kenji_808

NICE!!!

i would be down for this, it would be even better to make a package deal with the rear reservoir cap and oil filler cap all together

ive been planning on getting some but its hard to find a company that make all 3, since anodizing creates different shades of the same color
Posted via Mobile Device

Very do-able!...lets see how this goes, how people respond to it, and then we can move to the rear

BlueRaven · March 31st, 2010, 04:14 AM

You're gonna need a distribution centre for north america soon...lol

ThaiNinjaRR · March 31st, 2010, 05:07 AM

Quote:

Originally Posted by BlueRaven

You're gonna need a distribution centre for north america soon...lol

Lol, would be awesome..!

bdavison · March 31st, 2010, 05:39 AM

Here's an idea....

Front brake master cylinder cover lid with a CLOCK built into it.

ninjabadger · March 31st, 2010, 05:49 AM

Ooh I like that! Formotion has some pretty nice clocks that one could source (or even better, find out who makes them for Formotion)
Posted via Mobile Device

Broc · March 31st, 2010, 06:48 AM

An alternative to full rear sets.....an adapter to move the stock sets back & up a tad. That'd make a good combo with your handle bar anglers

ThaiNinjaRR · March 31st, 2010, 07:21 AM

Quote:

Originally Posted by Broc

An alternative to full rear sets.....an adapter to move the stock sets back & up a tad. That'd make a good combo with your handle bar anglers

maybe i will make some soon, got alot of other things in the works at the moment..
over the next month or so, you will see a serious burst of new Shinto Products..
maybe i can add the extenders to that list

If you want the angeld risers, put your vote on the risers page, so can get some support, then i will make a new load..

adouglas · March 31st, 2010, 07:59 AM

Quote:

Originally Posted by Broc

An alternative to full rear sets.....an adapter to move the stock sets back & up a tad. That'd make a good combo with your handle bar anglers

+1. Should include a longer shift rod linkage and ideally be designed so the existing rear brake light switch, etc. can still be used.

Broc · March 31st, 2010, 08:00 AM

Bout time someone started making affordable mods for the 250r, I think you're going to make a lot of money my friend

What else you got coming up?

ThaiNinjaRR · March 31st, 2010, 08:14 AM

Quote:

Originally Posted by Broc

Bout time someone started making affordable mods for the 250r, I think you're going to make a lot of money my friend

What else you got coming up?

Hmm lets see.. of the top of my head, while i sit here comfortably on my sofa watching a movie...

Rear Brake caps, Front break caps, Regular riser, frame plugs, fork plugs for clip ons, key hole rings, exhaust hangers, licance plate holders, Bolt kits, gas caps, radiator covers, engine guards,hmm some other stuff cant think......

and thats just the metal work, wait and see what im doing with fibre and lights..

Its taking me longer thatn i thought to sort my webpage out, want it to be perfect!

ThaiNinjaRR · March 31st, 2010, 08:15 AM

Question: if i gave Shinto Decals out with products, do you think people would put them on the bike?

M-Oorb · March 31st, 2010, 08:23 AM

If the frame plugs are coming out soon you can add them to my order haha. And if it was a tasteful decal and not too big...dont see why not. It would have to be the right color though

ztrack157 · April 1st, 2010, 09:45 AM

I would change the racing accessories to racing products

iceman.kcmo · April 2nd, 2010, 09:48 PM

mirror block off plates? I just had to buy some for my pre-gen

ThaiNinjaRR · April 2nd, 2010, 11:13 PM

Quote:

Originally Posted by iceman.kcmo

mirror block off plates? I just had to buy some for my pre-gen

Wow... i was just thinking that last night!...
wondering to do just single place to go over the holes, or like a cap to cover the whole extruding bump... hmmm

RaceBikeRentals · April 3rd, 2010, 08:05 PM

I'd like to see an accessory mounting plate that fits over the fork tubes when using clip-ons. Black powdercoated.

Ken08Ninja · April 3rd, 2010, 08:52 PM

Any plans for some adjustable levers?

ThaiNinjaRR · April 3rd, 2010, 10:41 PM

Quote:

Originally Posted by Ken08Ninja

Any plans for some adjustable levers?

Yea i already stock 3 types of levers.
check out my web page in a few days. i will also post a SHINTO NEW ITEMS Thread in a day or two,

ThaiNinjaRR · April 3rd, 2010, 10:42 PM

Quote:

Originally Posted by RaceBikeRentals

I'd like to see an accessory mounting plate that fits over the fork tubes when using clip-ons. Black powdercoated.

Do you mean caps to fill the tube holes? (i am currently machining them now)

ThaiNinjaRR · April 3rd, 2010, 10:44 PM

So, no thought on the oil cover? its gonna get machined this week, so i may just leave it blank with logo on side, look neat and tidy

Dmitriy · April 4th, 2010, 10:50 AM

Quote:

Originally Posted by RaceBikeRentals

I'd like to see an accessory mounting plate that fits over the fork tubes when using clip-ons. Black powdercoated.

You mean one that would hold the GPX Pro Dash Logger? Nice That would be cool.

RaceBikeRentals · April 12th, 2010, 05:57 PM

Yeah, something like a bridge that fits across the top of the fork tubes, floating an inch or so above the triple clamp. I have one for my KLR650 and love it.

ithaca00 · April 12th, 2010, 09:04 PM

Quote:

Originally Posted by ThaiNinjaRR

Question: if i gave Shinto Decals out with products, do you think people would put them on the bike?

People put stickers on everything!

Personally, I wouldn't but that's just me. I know a lot of people that have A*, etc. plastered all over their bikes. Whether or not people put them on bikes isn't that big of a deal. What you want is them put up on SOMETHING be it a bike, a toolbox, a trailer, a toddler, anything will get the word out...

As far as the brake reservoir cap that you have I think it looks good the way it is, simple. Maybe like Matt said, change it to "Racing Products" but that depends on the company name and goal, so it's not lightly changed...

adouglas · April 13th, 2010, 04:00 AM

Quote:

Originally Posted by ThaiNinjaRR

Question: if i gave Shinto Decals out with products, do you think people would put them on the bike?

I did stuff like that....

.... when I was a teenager.

Absolutely not.

(Though I'd be glad to send you sticker with my band's logo on it if you'd like to put it on your bike....)

ThaiNinjaRR · April 18th, 2010, 09:24 AM

Quote:

Originally Posted by adouglas

I did stuff like that....

.... when I was a teenager.

Absolutely not.

(Though I'd be glad to send you sticker with my band's logo on it if you'd like to put it on your bike....)

Hell yea, go on, send me a nice sticker with your bands logo

and i will put it on a track bike!..

The reasons i ask, is when i look at other people's bikes, i see Alot of guys sticking the brand names of the products they use..
Perelli, Yoshimura, 7/11 Rattle can, etc etc...

just wondered would i be wasting money getting profesional stickers made up..

Gereneally i have had good feedback, saying yes.. so the stickers are in process.. ready next month..

im not a personal fan of totally decking your bike out in stickers, but one or two placed in the right spot can be ok..

oh i should mention, my stickers messure 1ft by 3 ft..... MESSING!... imagine the Ego i would have to have to chuck them in the post to you lol.

ThaiNinjaRR · April 18th, 2010, 09:25 AM

Quote:

Originally Posted by RaceBikeRentals

Yeah, something like a bridge that fits across the top of the fork tubes, floating an inch or so above the triple clamp. I have one for my KLR650 and love it.

Whats the purpose of this? to put accessories on it?..

RaceBikeRentals · April 18th, 2010, 08:26 PM

Yeah.... I could use a place for laptimer, water temp gauge, GPS, etc.

tjb0012 · April 18th, 2010, 08:42 PM

If you would like to send me some decals I would gladly put them on my bike! or helmet depending on their style.. either way, they would definitely go somewhere. I love your products and would be happy to rep shinto to fellow bikers

ThaiNinjaRR · April 18th, 2010, 10:51 PM

Quote:

Originally Posted by RaceBikeRentals

Yeah.... I could use a place for laptimer, water temp gauge, GPS, etc.

sounds interesting...
i could do this for you, if you need a few.

if you can send me one like in the pic you show above, i will look and adapt it to the ninja. ( of course return to you once i have looking at it)

Maybe this will be of use to you?

ThaiNinjaRR · April 18th, 2010, 10:52 PM

Quote:

Originally Posted by tjb0012

If you would like to send me some decals I would gladly put them on my bike! or helmet depending on their style.. either way, they would definitely go somewhere. I love your products and would be happy to rep shinto to fellow bikers

Thanx man!...

Thanx for the vote of Confidence.

pm me your info, and once they come in, i will send you some out.

Betlog · April 18th, 2010, 11:23 PM

Quote:

Originally Posted by ThaiNinjaRR

Do you mean caps to fill the tube holes? (i am currently machining them now)

Nice! How's this coming along? I want one of these.

ThaiNinjaRR · May 11th, 2010, 07:44 PM

Quote:

Originally Posted by Betlog

Nice! How's this coming along? I want one of these.

these are currently at the factory being Machined.

Would be interested to know what colors people would like.

i am thinking to get Gold, Silver, Red... any other requests?

rceezy · May 11th, 2010, 08:11 PM

Don't mind me, just subscribing to this awesome thread so I can keep checking back!

ThaiNinjaRR · May 12th, 2010, 11:31 PM

JUST IN: i have just recieved a pack from my CNC guy, and here are the Samples for the Front Oil Filler cap.

ThaiNinjaRR · May 12th, 2010, 11:34 PM

Of course will be available in all the usual colors..

So guys please some feedback..

and i will be deciding over the week if i will make a mass load of a few hundred, and feedback from you guys would help me decide..

Also, anyone who would like to buy one. just taking names at the moment, not orders.

if all goes well, i will takes order later on.

thnx guys..

randomwalk101 · May 13th, 2010, 11:42 AM

That looks real nice. How muc does a pair like that costs? Does it need some rubber gasket to seal? I'd hate to have brake fluid leaking all over
Posted via Mobile Device

ThaiNinjaRR · May 13th, 2010, 12:02 PM

Quote:

Originally Posted by randomwalk101

That looks real nice. How muc does a pair like that costs? Does it need some rubber gasket to seal? I'd hate to have brake fluid leaking all over
Posted via Mobile Device

the inside is exactly the same as the OEM, so you just use the OEM Rubber to seal. no point adding extra costing on items we already can re-use.

Dont come in pairs

just the one is needed of course.

i have not set pricing yet.. i am thinking like 25-30 bucks.

March 31st, 2010, 03:30 AM	#1
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	SHINTO Group Design Thread Ok, so i am sitting here Designing new items to make..when i had an idea.... Why not let you guys have a say in the Design.... I know what i like, but how many times have you said."i wish it..." Well here is your chance... Today i will say, lets Design a Front Oil Filler Cap (to replace OEM) Of course, the colors are of no importance, as you know, i will make all the colors.. so just give me your feedback, your ideas, your "that would be nice".. and the finished product will be Produced!.. Well, it will be made if its do-able...lol... i cant make a oil filler cap that has complete NHL team playing hockey.. so be sensable with your ideas lol.. OK...here is a blank cap i just mocket up, the sizing is not correct, its just somthing for you guys to get an idea.. The sides will have Shinto Racing Accessories (as shown) Hope this works, and if it does, i will do more!!!

March 31st, 2010, 03:30 AM	#2
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	The Blank Canvas

March 31st, 2010, 04:14 AM	#5
BlueRaven ninjette.org certified postwhore Name: Lil One Location: NB Canada Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.	You're gonna need a distribution centre for north america soon...lol __________________________________________________ I'm not small, I'm fun sized

March 31st, 2010, 06:48 AM	#9
Broc ninjette.org member Name: Broc Location: America Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176	An alternative to full rear sets.....an adapter to move the stock sets back & up a tad. That'd make a good combo with your handle bar anglers __________________________________________________ 2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc

March 31st, 2010, 08:00 AM	#12
Broc ninjette.org member Name: Broc Location: America Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176	Bout time someone started making affordable mods for the 250r, I think you're going to make a lot of money my friend What else you got coming up? __________________________________________________ 2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc

March 31st, 2010, 03:39 AM	#3
kenji_808 ninjette.org member Name: Justin Location: Ewa Beach, HI Join Date: Feb 2010 Motorcycle(s): 2009 CT Blue 250R(Sold), 2008 Black & Silver Honda CBR600RR(Current) Posts: 201	NICE!!! i would be down for this, it would be even better to make a package deal with the rear reservoir cap and oil filler cap all together ive been planning on getting some but its hard to find a company that make all 3, since anodizing creates different shades of the same color Posted via Mobile Device

March 31st, 2010, 05:39 AM	#7
bdavison Wartown, USA Name: Bryan Location: Warner Robins, GA Join Date: Nov 2009 Motorcycle(s): 2009 Ninja 250R SE, 2007 Ninja 650R, and assorted other bikes Posts: A lot.	Here's an idea.... Front brake master cylinder cover lid with a CLOCK built into it.

March 31st, 2010, 05:49 AM	#8
ninjabadger ninjette.org member Name: Corey Location: Madison, WI Join Date: Nov 2009 Motorcycle(s): 2009 Kawasaki 250R, 2008 Genuine Buddy 50 Posts: 121	Ooh I like that! Formotion has some pretty nice clocks that one could source (or even better, find out who makes them for Formotion) Posted via Mobile Device

March 31st, 2010, 08:15 AM	#14
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	Question: if i gave Shinto Decals out with products, do you think people would put them on the bike?

March 31st, 2010, 08:23 AM	#15
M-Oorb ninjette.org sage Name: Matt Location: South East Florida/Rutgers University Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914	If the frame plugs are coming out soon you can add them to my order haha. And if it was a tasteful decal and not too big...dont see why not. It would have to be the right color though __________________________________________________ Pictures of my ninjette plus...

April 1st, 2010, 09:45 AM	#16
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I would change the racing accessories to racing products __________________________________________________ Sportisimoto USA is born.

April 2nd, 2010, 09:48 PM	#17
iceman.kcmo ninjette.org member Name: Steve Location: Kansas city Join Date: Aug 2009 Motorcycle(s): 94 Ex250 Posts: 101	mirror block off plates? I just had to buy some for my pre-gen

April 3rd, 2010, 08:05 PM	#19
RaceBikeRentals Pimpin Name: Richard Location: Ninja 250 Whorehouse Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973	I'd like to see an accessory mounting plate that fits over the fork tubes when using clip-ons. Black powdercoated. __________________________________________________ -Richard MotoList.com <<<List your stuff!

April 3rd, 2010, 08:52 PM	#20
Ken08Ninja ninjette.org member Name: Ken Location: NY Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129	Any plans for some adjustable levers?

April 3rd, 2010, 10:44 PM	#23
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	So, no thought on the oil cover? its gonna get machined this week, so i may just leave it blank with logo on side, look neat and tidy

April 18th, 2010, 08:26 PM	#30
RaceBikeRentals Pimpin Name: Richard Location: Ninja 250 Whorehouse Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973	Yeah.... I could use a place for laptimer, water temp gauge, GPS, etc. __________________________________________________ -Richard MotoList.com <<<List your stuff!

April 18th, 2010, 08:42 PM	#31
tjb0012 ninjette.org member Name: T.J. Location: Massachusetts Join Date: Mar 2010 Motorcycle(s): 2009 SE Ninja250r Posts: 51	If you would like to send me some decals I would gladly put them on my bike! or helmet depending on their style.. either way, they would definitely go somewhere. I love your products and would be happy to rep shinto to fellow bikers

May 11th, 2010, 08:11 PM	#36
rceezy Lean Me Name: RC Location: America Join Date: Mar 2009 Motorcycle(s): 2008 Ninja 250 Posts: 678 Blog Entries: 4	Don't mind me, just subscribing to this awesome thread so I can keep checking back!

May 12th, 2010, 11:31 PM	#37
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	JUST IN: i have just recieved a pack from my CNC guy, and here are the Samples for the Front Oil Filler cap.

May 12th, 2010, 11:34 PM	#38
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	Of course will be available in all the usual colors.. So guys please some feedback.. and i will be deciding over the week if i will make a mass load of a few hundred, and feedback from you guys would help me decide.. Also, anyone who would like to buy one. just taking names at the moment, not orders. if all goes well, i will takes order later on. thnx guys..

May 13th, 2010, 11:42 AM	#39
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	That looks real nice. How muc does a pair like that costs? Does it need some rubber gasket to seal? I'd hate to have brake fluid leaking all over Posted via Mobile Device

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[roadracingworld.com] - Piaggio Group Americas Sets Up Advanced Design Center In Sout	Ninjette Newsbot	Motorcycling News	0	March 19th, 2012 03:20 PM
shinto clip-on group buy	want1sobad	Motorcycle-related	5	December 12th, 2010 08:41 AM
shinto clip-ons group buy	want1sobad	Motorcycle-related	11	July 22nd, 2010 06:36 PM
Group buy Shinto fender eliminator	sherjay	Motorcycle-related	10	July 21st, 2010 04:58 PM
SHINTO/ThaiNinjaRR Rep Thread	Postiez	Motorcycle-related	22	June 23rd, 2010 08:08 AM