My White Ninja 250R SE Thread. - Page 2

Mr.E · October 20th, 2011, 03:43 PM

Got the cowl a day early. Going to a meetup tonight and see if they can show me to fix the gap. Here's a pic

I will admit, i ended up walking back into the place and asking if it were meant to be so... sparkly... it was weird to say the least, but it works. Im sure once it dirties up I wont be so worried. x-)

greatwhiteninja · October 21st, 2011, 08:52 AM

the seat cowl sparkly?? looks good tho

and my seat cowl i took all the rubber grommets off, bent the front bar on it and actually had to tweak the rear bracket that it pushes into.. sits flush now

Heed · October 21st, 2011, 09:35 AM

i wish they still offered white. -_-

Mr.E · October 23rd, 2011, 02:16 AM

It is a bit sparkly. Im not sure why though, but it grew on me so it looks nice. Ill try and see monday if I can get a good picture of what I mean.

And what do you mean Heed? Make white bikes still?

As for the bike, I ordered some pazzo levers today. I saw the 2wheels at a meet up, I liked them, but the more I thought about it the red was too off for my liking, and Im very big on looks. Now im just debating on what kind of grips to get. Any ideas?

greatwhiteninja · October 23rd, 2011, 06:13 AM

grips are about the only thing i havent changed yet..loL! im no help there. i do like those spike grips, but i wouldnt be able to run my bar end mirrors with them so..

Custom Seat Creations · October 23rd, 2011, 09:56 AM

Beautiful bike!

Cazper · October 23rd, 2011, 10:12 AM

The reason your cowl is "sparkly" is because you got an 09 model. All 09's have the diablo black which has a flake in it. Even my SE has it on the black areas. Just thought I'd point that out for you.

Posted via Mobile Device

Mr.E · October 23rd, 2011, 02:53 PM

*sigh* the guy told me it was made for my 2011 se. it looks fine in all honesty. And i do a lot of riding at night so its not too noticable.

Thank you Becky.

and im not sure if Id like spiked. Wouldnt you be scared if it fell on you?

Trailerboy531 · October 23rd, 2011, 08:21 PM

I just put Ariete Race Replica grips on, they look great and really comfy! You should get them and do the zip-tie mod while you're at it. Makes the throttle body a bit wider where the push/pull cables attach so there's less throw in the throttle. Essentially a bit more acceleration for cheap!

Picture related

Mr.E · October 23rd, 2011, 08:50 PM

Hey max, those grips do look good. Mind me asking how much they ran you? I can see Dude certainly is enjoying them lol.

I looked up the ziptie mod now, I think that will be one of my next mods. I want to shimm my needles though first. I just havnt built up the guts to do so, and im waiting till after my 600 mile check up, so if there is any problems they cant blame it on me lol. But thats a great suggestion, thanks. A little more throttle responce would be great x-)

Trailerboy531 · October 23rd, 2011, 09:08 PM

Over the weekend at the So Cal Tech Day I did the throttle mod, only I used (or rather Kevin2109 basically did for me..) PVC pipe. It's about the thickness of 2 zipties so it has even less throw and I love it! Scour the web and see if you can do that instead, but the zip tie way works as well.

As far as price of the grips I don't entirely remember but I got them from amazon for less than $30 I think. Maybe even $15?

EDIT: here ya go! $22

http://www.amazon.com/Ariete-Race-Re...9429350&sr=8-1

Mr.E · October 23rd, 2011, 10:00 PM

they make flexible pvc pipe? and those are a good price! I see you have clip ons though, do you think they'd fit stock handle bars?

Trailerboy531 · October 23rd, 2011, 11:44 PM

Flexible?

You definitely just cut the size pipe you need, cut a slot in the circle for the throttle cables to pass through, glue the pipe to the body, and then dremel it down so its not too thick on there. I have a picture on my phone but I am lazzzzzzzzzzzy. Maybe i'll get them off tomorrow.

and those grips will probably fit better on stock bars than they did on my clip-ons

though they did fit well on the clip-ons.

Trailerboy531 · October 24th, 2011, 12:11 AM

Oh i know that..but.....lazeeeeeeeeee

Mr.E · October 24th, 2011, 12:14 AM

ohh man, i had a slow moment, sorry. Working a 12 again over night and by sunday i dont have many brain cells active, I forgot pvc pipes were round -_- I get wht you mean now lol. Thats a good idea.

And I might just buy those. Im just worried thy wouldnt fit stock bars, I think stock is like 7/8 or something? *sigh* lol

Mr.E · October 24th, 2011, 01:18 AM

Quote:

Originally Posted by Phil7153

They will fit. Im like 95% sure. Plus amazon is great about returns

Ordering now. x-)

Trailerboy531 · October 24th, 2011, 11:29 AM

They will fit and you'll love them

Mr.E · October 24th, 2011, 11:59 AM

Quote:

Originally Posted by Trailerboy531

They will fit and you'll love them

Ordered. x-) Hopefully they'll come in the same day as my pazzos

blink · October 24th, 2011, 12:14 PM

Ahhhhh your ninja is sexy!

Mr.E · October 24th, 2011, 08:17 PM

Quote:

Originally Posted by blink

Ahhhhh your ninja is sexy!

Thanks! Thats all Ive been saying today when I see it or been wanting to ride. I think i got the bug.

Today I let loose just a little, since it's still in its break in period, Man I cant wait to open her up. It was so fun, much more power then I thought. But Ill wait till my 600 to make sure its all ok. 450 miles on her now. :-\ I need to just ride around one night

saxnbass · October 24th, 2011, 08:29 PM

Hey E, I should be getting mine hopefully tomorrow. If not, either Wednesday or Thursday, we should ride this Friday or this weekend if you're free and I get all my gear in by then.

Trailerboy531 · October 24th, 2011, 08:50 PM

I have to go ride to a friends, but I should be back in an hour. I'll leave this thread open so I hopefully dont forget!

STILL LAZYYYYYYY

Trailerboy531 · October 25th, 2011, 12:08 AM

...my phone is failing horribly... after 2 hours of trying to sync my pictures here I am...a failure, using email.

Like I said, get PVC pipe (don't ask me the size, Kevin2109 did this mod for me and deserves ALL credit.) Cut a piece that fits the end of the throttle body leaving space for the cables to go in, as pictured. Super glue it down once you're sure you have the right fit. Dremel that mofo down because stock pipe thickness is just way too much (again, look at the picture) make sure all the edges are smooth and then put it back in. yay!

blink · October 25th, 2011, 09:33 AM

Quote:

Originally Posted by Mr.E

Well I decided I'll just post up these older ones. The rear is completely chopped now. But its good to show progress.

I also want some opinions. I was going to get a red chain, but after looking at probolts it looks like I can get some red bolts for here (the bolt im pointing at)

Just wondering what would you guys think of those bolts instead of red chain?

Link: http://www.probolt-usa.com/Products/...ocket_Nuts_Set (in red)

The red bolts would look awesome!

Mr.E · October 27th, 2011, 11:38 PM

Finally got my grips in, and got glue, no clue how to get bar ends off. I dont have a torch. Kinda want to avoid that route anyways. :-\

Trailerboy531 · October 28th, 2011, 01:28 AM

send Kevin2109 a pm and ask how he does it. I absolutely raped and pillaged my bar ends trying to get them off.....he walked over with a f-ing power drill or something and took them off in 5 seconds.

i hate that guy...

Mr.E · October 28th, 2011, 08:15 AM

Lol. I didnt try a power tool. I'll try that when I get my bike back. Brought it up just now for the 600 mile service. I figure since its raining I wont be going out today, so I'll just install the grips when I get it back.

Mr.E · October 28th, 2011, 01:30 PM

All tools of which I dont have. I have the drill, and hear about drilling off the screw head, but I want to be able to put my bars back on...

Trailerboy531 · October 28th, 2011, 01:44 PM

We landed up having to take off the screw head for the side I had raped so you need to be careful. MAKE SURE you use a #3 phillips head!!!

Mr.E · October 28th, 2011, 03:20 PM

So if you take off the screw head, how do you get the bar ends back on? Or do you not?

Trailerboy531 · October 28th, 2011, 07:29 PM

You get a new screw! But my screw head came off BECAUSE i messed up and torches/impact drivers/power tools were not working, they ended up stripping the hell out of the bolt until there was nothing to grab. THEN we (actually KCJohnson, who is the greatest guy ever) took the bolt head off. Yours should just come right off and be able to go right back on, unless you run in to similar problems.

Mr.E · October 30th, 2011, 05:58 PM

I ran into simular problems. :-\ My right side came off with the impact driver, but since I fidled with my left side before any research, it ended up becoming extremely stripped with the impact driver. I drilled the head off, will be buying some good vice grips to get the rest of the screw off.

I did get the grips on though. Glued them before I left to work so they'd be dry by the time I get home. They look good, Ill post pictures once I get my bar ends back on. x-)

Trailerboy531 · October 30th, 2011, 10:57 PM

keep in mind mine were dirty in about 10 minutes....damn dirty ass gloves

Mr.E · October 31st, 2011, 12:32 AM

Max, why do you keep telling me things a little too late? First the rearsets, now this.

. jk. Im sure it will be fine. If anything, my bike is dirty, so it will match.

Trailerboy531 · October 31st, 2011, 12:39 PM

Yeah i'm a little slow on passing the details in the information sometimes haha, sorry. To be fair if I saw you were looking for red rear sets I would have told you right away

Mr.E · October 31st, 2011, 05:50 PM

I see what you mean. They did get dirty, but not too bad I guess. Anywho, rearsets coming in, they're actually the black x red ones, which I personally thought looked nice as well, since the red wasnt in stock. Also got some new red bar ends on order, since I couldnt find any damn screws long enough around town today at autozone, home depot, or lows. I think the red bar ends will look nice so all is good.

Trailerboy531 · October 31st, 2011, 06:32 PM

Yeah red bar ends look good. I actually considered buying that red/black set that you just bought but after talking to Kevin we're going to take his apart and mine apart and make one of our own, saves a pretty penny!

Mr.E · November 2nd, 2011, 08:39 PM

Word to ya 250.

Red pazzo levers black adjustment coming in. Red bar ends coming in. red front brake oil cap.

All thats left:

Red passenger foot pegs and possibly a black db windscreen. Then Im done.

Rearsets were a pain in the ass on the brake side.

saxnbass · November 2nd, 2011, 08:43 PM

Nice grips... the flushmounts new too?

Trailerboy531 · November 2nd, 2011, 08:57 PM

those grips and rear sets look great!

October 20th, 2011, 03:43 PM	#41
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Got the cowl a day early. Going to a meetup tonight and see if they can show me to fix the gap. Here's a pic I will admit, i ended up walking back into the place and asking if it were meant to be so... sparkly... it was weird to say the least, but it works. Im sure once it dirties up I wont be so worried. x-) __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 21st, 2011, 08:52 AM	#42
greatwhiteninja Ridin Dirty Name: Ed Location: Delaware Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921	the seat cowl sparkly?? looks good tho and my seat cowl i took all the rubber grommets off, bent the front bar on it and actually had to tweak the rear bracket that it pushes into.. sits flush now __________________________________________________ #1

October 23rd, 2011, 02:16 AM	#44
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	It is a bit sparkly. Im not sure why though, but it grew on me so it looks nice. Ill try and see monday if I can get a good picture of what I mean. And what do you mean Heed? Make white bikes still? As for the bike, I ordered some pazzo levers today. I saw the 2wheels at a meet up, I liked them, but the more I thought about it the red was too off for my liking, and Im very big on looks. Now im just debating on what kind of grips to get. Any ideas? __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 23rd, 2011, 06:13 AM	#45
greatwhiteninja Ridin Dirty Name: Ed Location: Delaware Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921	grips are about the only thing i havent changed yet..loL! im no help there. i do like those spike grips, but i wouldnt be able to run my bar end mirrors with them so.. __________________________________________________ #1

October 23rd, 2011, 09:56 AM	#46
Custom Seat Creations Sportbike Seat Covers Name: Becky Location: Colorado Springs Join Date: Dec 2008 Motorcycle(s): 10' Special Edition Tribal 250 Red/Black ; 08' Ninja 250 (RIP by a cager); 05' Honda CBR 600 Posts: 235	Beautiful bike! __________________________________________________ Bonanzle Store-CSC Seat Covers

October 21st, 2011, 09:35 AM	#43
Heed ninjette.org certified postwhore Name: John Location: Illinois Join Date: Aug 2011 Motorcycle(s): None yet, yet. Posts: A lot.	i wish they still offered white. -_-

October 23rd, 2011, 10:12 AM	#47
Cazper ninjaholic Name: Dustin Location: Oceanside, CA Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot. Blog Entries: 3	The reason your cowl is "sparkly" is because you got an 09 model. All 09's have the diablo black which has a flake in it. Even my SE has it on the black areas. Just thought I'd point that out for you. Posted via Mobile Device

October 23rd, 2011, 02:53 PM	#48
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	sigh the guy told me it was made for my 2011 se. it looks fine in all honesty. And i do a lot of riding at night so its not too noticable. Thank you Becky. and im not sure if Id like spiked. Wouldnt you be scared if it fell on you? __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 23rd, 2011, 08:50 PM	#50
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Hey max, those grips do look good. Mind me asking how much they ran you? I can see Dude certainly is enjoying them lol. I looked up the ziptie mod now, I think that will be one of my next mods. I want to shimm my needles though first. I just havnt built up the guts to do so, and im waiting till after my 600 mile check up, so if there is any problems they cant blame it on me lol. But thats a great suggestion, thanks. A little more throttle responce would be great x-) __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 23rd, 2011, 09:08 PM	#51
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Over the weekend at the So Cal Tech Day I did the throttle mod, only I used (or rather Kevin2109 basically did for me..) PVC pipe. It's about the thickness of 2 zipties so it has even less throw and I love it! Scour the web and see if you can do that instead, but the zip tie way works as well. As far as price of the grips I don't entirely remember but I got them from amazon for less than $30 I think. Maybe even $15? EDIT: here ya go! $22 http://www.amazon.com/Ariete-Race-Re...9429350&sr=8-1

October 23rd, 2011, 10:00 PM	#52
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	they make flexible pvc pipe? and those are a good price! I see you have clip ons though, do you think they'd fit stock handle bars? __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 23rd, 2011, 11:44 PM	#53
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Flexible? You definitely just cut the size pipe you need, cut a slot in the circle for the throttle cables to pass through, glue the pipe to the body, and then dremel it down so its not too thick on there. I have a picture on my phone but I am lazzzzzzzzzzzy. Maybe i'll get them off tomorrow. and those grips will probably fit better on stock bars than they did on my clip-ons though they did fit well on the clip-ons.

October 24th, 2011, 12:11 AM	#54
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Oh i know that..but.....lazeeeeeeeeee

October 24th, 2011, 12:14 AM	#55
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	ohh man, i had a slow moment, sorry. Working a 12 again over night and by sunday i dont have many brain cells active, I forgot pvc pipes were round -_- I get wht you mean now lol. Thats a good idea. And I might just buy those. Im just worried thy wouldnt fit stock bars, I think stock is like 7/8 or something? sigh lol __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 24th, 2011, 11:29 AM	#57
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	They will fit and you'll love them

October 24th, 2011, 12:14 PM	#59
blink Always. Name: Alex Location: Calgary, AB Join Date: Mar 2011 Motorcycle(s): '08 Ninja 250, '05 GSX-R600 Posts: A lot.	Ahhhhh your ninja is sexy! __________________________________________________ blink-182

October 24th, 2011, 08:29 PM	#61
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Hey E, I should be getting mine hopefully tomorrow. If not, either Wednesday or Thursday, we should ride this Friday or this weekend if you're free and I get all my gear in by then.

October 24th, 2011, 08:50 PM	#62
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	I have to go ride to a friends, but I should be back in an hour. I'll leave this thread open so I hopefully dont forget! STILL LAZYYYYYYY

October 27th, 2011, 11:38 PM	#65
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Finally got my grips in, and got glue, no clue how to get bar ends off. I dont have a torch. Kinda want to avoid that route anyways. :-\ __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 28th, 2011, 01:28 AM	#66
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	send Kevin2109 a pm and ask how he does it. I absolutely raped and pillaged my bar ends trying to get them off.....he walked over with a f-ing power drill or something and took them off in 5 seconds. i hate that guy...

October 28th, 2011, 08:15 AM	#67
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Lol. I didnt try a power tool. I'll try that when I get my bike back. Brought it up just now for the 600 mile service. I figure since its raining I wont be going out today, so I'll just install the grips when I get it back. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 28th, 2011, 01:30 PM	#68
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	All tools of which I dont have. I have the drill, and hear about drilling off the screw head, but I want to be able to put my bars back on... __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 28th, 2011, 01:44 PM	#69
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	We landed up having to take off the screw head for the side I had raped so you need to be careful. MAKE SURE you use a #3 phillips head!!!

October 28th, 2011, 03:20 PM	#70
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	So if you take off the screw head, how do you get the bar ends back on? Or do you not? __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 28th, 2011, 07:29 PM	#71
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	You get a new screw! But my screw head came off BECAUSE i messed up and torches/impact drivers/power tools were not working, they ended up stripping the hell out of the bolt until there was nothing to grab. THEN we (actually KCJohnson, who is the greatest guy ever) took the bolt head off. Yours should just come right off and be able to go right back on, unless you run in to similar problems.

October 30th, 2011, 05:58 PM	#72
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	I ran into simular problems. :-\ My right side came off with the impact driver, but since I fidled with my left side before any research, it ended up becoming extremely stripped with the impact driver. I drilled the head off, will be buying some good vice grips to get the rest of the screw off. I did get the grips on though. Glued them before I left to work so they'd be dry by the time I get home. They look good, Ill post pictures once I get my bar ends back on. x-) __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 30th, 2011, 10:57 PM	#73
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	keep in mind mine were dirty in about 10 minutes....damn dirty ass gloves

October 31st, 2011, 12:32 AM	#74
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Max, why do you keep telling me things a little too late? First the rearsets, now this. . jk. Im sure it will be fine. If anything, my bike is dirty, so it will match. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 31st, 2011, 12:39 PM	#75
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Yeah i'm a little slow on passing the details in the information sometimes haha, sorry. To be fair if I saw you were looking for red rear sets I would have told you right away

October 31st, 2011, 05:50 PM	#76
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	I see what you mean. They did get dirty, but not too bad I guess. Anywho, rearsets coming in, they're actually the black x red ones, which I personally thought looked nice as well, since the red wasnt in stock. Also got some new red bar ends on order, since I couldnt find any damn screws long enough around town today at autozone, home depot, or lows. I think the red bar ends will look nice so all is good. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

October 31st, 2011, 06:32 PM	#77
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Yeah red bar ends look good. I actually considered buying that red/black set that you just bought but after talking to Kevin we're going to take his apart and mine apart and make one of our own, saves a pretty penny!

November 2nd, 2011, 08:39 PM	#78
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Word to ya 250. Red pazzo levers black adjustment coming in. Red bar ends coming in. red front brake oil cap. All thats left: Red passenger foot pegs and possibly a black db windscreen. Then Im done. Rearsets were a pain in the ass on the brake side. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 2nd, 2011, 08:43 PM	#79
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Nice grips... the flushmounts new too?

November 2nd, 2011, 08:57 PM	#80
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	those grips and rear sets look great!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another White Ninja 250R SE Thread	sousuke86	Pictures	43	February 17th, 2013 12:20 AM
k24_cm7's update/picture thread (10' Ninja 250r SE)	k24_cm7	Pictures	41	April 18th, 2012 10:32 AM
Ninja 250R Pearl White TW	TiagoW	Pictures	36	April 9th, 2012 01:44 PM
Ninja 250R Defect Thread	jonthechron	2008 - 2012 Ninja 250R Tech Talk	78	October 7th, 2011 01:56 AM
Sakura~ 2011 250r Pearl White/Ebony Progress Thread	warlord	Pictures	40	July 6th, 2011 03:13 PM