March 14th, 2017, 02:00 PM | #1 |
ninjette.org newbie
Name: Cliff
Location: richmond va
Join Date: Mar 2017 Motorcycle(s): 2012 ninja 250, harley davidson iron 883 Posts: 3
|
New exhaust
So I ordered a cheap, generic exhaust off of eBay for $40. Surprisingly surprised by the results.
Check it out. https://vimeo.com/204255985 |
|
March 14th, 2017, 02:10 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Pretty cool Cliff!
Now... starting around 30 secs. into the video, watch under the rearset. What hits the floor? Looks like oil?!!!?!?!?!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 14th, 2017, 02:10 PM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Oh! And welcome!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 14th, 2017, 02:58 PM | #4 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
welcome
|
|
March 14th, 2017, 03:24 PM | #5 |
ninjette.org newbie
Name: Cliff
Location: richmond va
Join Date: Mar 2017 Motorcycle(s): 2012 ninja 250, harley davidson iron 883 Posts: 3
|
|
|
March 14th, 2017, 05:53 PM | #6 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
Any chance you have a link to said exhaust?
Thanks!
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
March 14th, 2017, 08:39 PM | #7 |
ninjette.org certified postwhore
Name: Kerry
Location: Ventura, CA
Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot.
MOTM - Apr '18, Apr '17, Apr '16
|
Welcome!
|
|
March 15th, 2017, 05:14 AM | #8 |
ninjette.org newbie
Name: Cliff
Location: richmond va
Join Date: Mar 2017 Motorcycle(s): 2012 ninja 250, harley davidson iron 883 Posts: 3
|
http://www.ebay.com/itm/38mm-Carbon-...RXtWgZ&vxp=mtr
pretty much this guy. you will need to get an angled adapter piece. unless you want it to be stick out a few inches, unsupported. |
|
March 30th, 2017, 05:35 PM | #9 |
ninjette.org newbie
Name: mark
Location: grand rapids
Join Date: Mar 2017 Motorcycle(s): 2012 ninja 250r Posts: 3
|
I have the same exhaust. I made a bracket for it that mounts to the stock mount. It sounds great but i had to make a lip for the springs to mount. I just put a screw type clamp around some heat wrap on the stock pipe. Then hooked the springs under the screw clamp and tightened it. It actually looks factory and works great. Had to shim the jet needles but runs great on stock jets.
|
|
June 11th, 2017, 03:05 AM | #10 | |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
Quote:
|
|
|
June 11th, 2017, 03:14 AM | #11 | |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
Quote:
|
|
|
June 11th, 2017, 08:25 AM | #12 |
ninjette.org member
Name: RJ
Location: PA
Join Date: Dec 2015 Motorcycle(s): 2008 Ninja 250 Posts: 210
|
I have the same exhaust from amazon and I love it. Do you guys have it on the stock headers? I bought a full race exhaust then wrecked the bike and needed just a new slip on. The slip on slides right on to the headers I have. They are much larger than stock though. I believe something like 54mm outer diameter where the headers meet the slip on. My slip on came with two tiny hooks that you can tack to the stock header ring and an adapter piece to drop it to the 38mm required for the stock header.
Do you guys use the baffle or ride with it out? Glad to see others with this inexpensive exhaust haha |
|
June 11th, 2017, 10:06 AM | #13 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
aliexpress has a crapload of em. i'm a cheapo
https://www.aliexpress.com/item/Akra...308.0.0.NKb9UA https://www.aliexpress.com/item/Univ...308.0.0.NKb9UA
__________________________________________________
"trying not to get old" |
|
June 11th, 2017, 10:15 AM | #14 |
ninjette.org newbie
Name: mark
Location: grand rapids
Join Date: Mar 2017 Motorcycle(s): 2012 ninja 250r Posts: 3
|
Ill take a pic and figure out how to send it
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Area-P solo exhaust bracket for Ninja 300 w/stock exhaust | c-dog | Motorcycle-related | 2 | September 12th, 2014 10:48 AM |
How to remove stock exhaust and install aftermarket Slip-On Exhaust System Ninja 300 | SON1C | 2013 - 2017 Ninja 300 Tech Talk | 4 | August 14th, 2014 05:45 PM |
WTB: Area P full exhaust (or exchange 08+ stock exhaust) | mikecronis | Items Wanted | 0 | June 16th, 2010 05:54 AM |
|
|