May 3rd, 2011, 08:44 AM | #121 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
May 3rd, 2011, 07:02 PM | #122 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Originally Posted by wayanlam View Post
1: sarapacman99 - White Air scoop - Las Vegas - (payment requeste $32, part ordered) 2: blade - Green Air scoop - NY - (payment received $32, part ordered) 3: kawac - Black Air Scoop - Indianapolis - (payment requested $32, part will be ordered) 4: AzEKnightz - P&P Koso Cluster without voltmeter - California - (payment received $296, part ordered) 5: shigs - Black Air Scoop - Florida 6: chowbray - P&P Koso Cluster without voltmeter - Canada (deposit received $65, part ordered) 7: dubojr1 - P&P Koso Cluster - Florida - (payment received $355, part ordered) 8: NathanUc - P&P Koso Cluster - Indiana - (payment received $355, part ordered) 9: brandon, as per my e-mail. we are looking for a 4th RX2 koso spedometer. i seem to have bought the last three that they have in stock there are 3 potential outcomes... 1: cant find the spedometer, and ill send you the money back 2: will find the part, and all is well, ill ask for the rest of the money 3: cant find the part, but you can decide to use the other Koso speedometer, RX2N. also with the custom fiberglass bracket. (costs an additional $24 for this model though) ill keep you posted. W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield Last futzed with by wayanlam; May 4th, 2011 at 01:16 AM. |
|
May 4th, 2011, 01:50 AM | #123 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
aha, i got a picture of the RX2N with the custom bracket
Brandon, let me know if you'd be interested in this alternative. or should i ask them to keep looking for the RX2, and if they don't get it on time to cancel your order and ill return the money?
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 12:01 AM | #124 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ufff, session expired, and i lost everything i just wrote!! waaa.... and then when i finished writing it all a second time the power cut
anyhow, seems like im only able to get 2 sets with the RX2 speedometer. they are for Eric and Nathan who paid 1st. for jason and Braydon, on this short notice (before my girlfriend leaves) we can get you the RX2N for basically the same price: 3.000.000 Rp for the full set (koso RX2N + custom bracket + voltmeter) = $355 2.600.000 Rp for the set without voltmeter (just RX2N + custom bracket) = $305 so the set for Braydon, its $9 more. is that ok with you? for jason, would you accept the RX2N, or prefer to cancel it? if i had more time and told the shop they can wait for the stock to arrive, then we could get more of the RX2 models. but i need to order them now to get it by next week. and all they have are the newer RX2N speedometers atm. here are the specs on these 2 speedos, they are basically the same, just different layout. so guys, please let me know asap, so i can order them before the week end. cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 02:02 AM | #125 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
holy.... that dood just about added every possible part that you can get in that space, lol just another pic of the RX2N for you guys to see
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 04:46 AM | #126 |
ninjette.org newbie
Name: jack
Location: worcester
Join Date: Dec 2010 Motorcycle(s): 2009 ninja 250 Posts: 7
|
how do i order these stuff? is there a website?
|
|
May 5th, 2011, 05:03 AM | #127 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
If not.... how long is the shop thinking it will take to get in new stock? I realize I may miss out on the your girlfriend bringing it over but what's a guy to do...
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
May 5th, 2011, 05:47 AM | #128 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
|
|
|
May 5th, 2011, 05:52 AM | #129 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Understood! I don't think Wayan will care either. We will await your decision.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
May 5th, 2011, 07:15 AM | #130 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
wont make a difference to me, i can send back your money Nat if you want to pass your RX2 on to Jason.
in which case im just awaiting info from chowbray if you are ok to get the RX2N for the additional 9 bucks. i can ask tomorrow how long it might take to get the original RX2. probably gonna go pick up the 2 that i ordered last week tomorrow or on Saturday when i have time. ill then post up the pictures
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 02:22 PM | #131 | |
ninjette.org member
Name: Eric
Location: California, SF
Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27
|
Quote:
-AzEKnightz |
|
|
May 5th, 2011, 02:29 PM | #132 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
I heard back from my friend and it turns out timing was just bad. The parts he ordered for me just shipped out a couple days ago.
@dubojr1: clearly you have more seniority than me here so I feel somewhat guilty. If you are in a hurry to get the cluster, I'd be willing to wait it out and just get one on the next GB. I have my first track day scheduled around May 30th, but it's not like this is essential. |
|
May 5th, 2011, 04:59 PM | #133 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
so whats the verdict? i need to know today if im to order any of the RX2N.
personally i wish i could get the RX2N, since it has a more centered/symmetrical layout and it would work better with my street fighter mod (without fiberglass bracket) but my RX2 is already like a year old, so i cant offer to trade that in with you guys, lol keep me posted W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 05:11 PM | #134 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
|
|
|
May 5th, 2011, 06:03 PM | #135 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
all clear, just double checking with Braydon if he wants his RX2N kit. he said he would take it if it costs the same, but its $9 more, so i dont know if that close enough to being the same, or if he will cancel it too, lol
so between Nat and Jason, please let me know who will get this set, so that i can either return the money of the other person, or i keep looking for the RX2 and ship it out directly from Bali to your address when i get it. W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 5th, 2011, 06:29 PM | #136 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
@ Nathan: I just wanted to take a moment to say I totally appreciate you making the offer. I've been trying to get the KOSO kit now for a while but due to one of sources for it crashing and burning, I've had little luck getting a chance to get one since. In short, I'd love to take your spot. You sure your cool with it? If so..... I totally owe you a beer and a hand shack.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
May 5th, 2011, 06:34 PM | #137 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
@wayan: refund received. Thanks |
|
|
May 5th, 2011, 06:52 PM | #138 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Originally Posted by wayanlam View Post
1: sarapacman99 - White Air scoop - Las Vegas - (payment received $32, part ordered) 2: blade - Green Air scoop - NY - (payment received $32, part ordered) 3: kawac - Black Air Scoop - Indianapolis - (payment received $32, part ordered) 4: AzEKnightz - P&P Koso Cluster without voltmeter - California - (payment received $296, part ordered) 5: chowbray - P&P Koso Cluster without voltmeter - Canada (deposit received $65, part ordered the RX2N model) 6: dubojr1 - P&P Koso Cluster - Florida - (payment received $355, part ordered) 7: NathanUc - P&P Koso Cluster - Indiana - ($355 full refund just sent, koso set passed on to dubojr1) Nathan, just a thought~ if you want i can get JUST the custom fiberglass bracket, and then you can buy the RX2 from Koso USA? costs like $59 for that. just a thought, since ive sent 2 other members just the bracket, cos they already have the speedometer, but wanted this bracket. W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 6th, 2011, 05:21 AM | #139 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
wayan,
thanks for all the time and effort you're putting in on this - we really appreciate it. btw, can you check this and let me know? http://www.ninjette.org/forums/showp...3&postcount=32 thanks! |
|
May 6th, 2011, 02:42 PM | #140 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
Thanks for the offer, but I'm just going to wait and get it all in one big go later on Having the bracket sitting in front of me daily will just cause me to splurge and over spend on the RX2 lol |
|
|
May 8th, 2011, 11:23 PM | #141 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I just finally got back to this thread after my few weeks off and see that Wayan was askin Qs. I've been sending my notebook to Dell for service and they screwed up the shipping. I'm posting from work and I ran out of time but I'll try to pick this up on my phone.
|
|
May 9th, 2011, 07:01 AM | #142 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
got the faring covers today. one green, one black and one white, the red one is my old one, in case CZrow wants it? i think i sent you a pm asking if you wanted it? two of the koso RX2 arrived already, but im waiting on the third to get there the RX2N for Braydon before i go and pick it up, since its a little far from home. cheers, W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 9th, 2011, 07:36 AM | #143 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
May 9th, 2011, 08:22 AM | #144 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
yep all on schedule, the RX2N is going to get shipped here by express, so we should have it in the next couple days.
Braydon when will you send the remaining $240? did you get your paycheck yet? my girlfriend is flying out on Sunday so we still have all week.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 9th, 2011, 08:29 AM | #145 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Wow... everything seems to be moving right along well. Kinda makes me wanna buy some more cool stuff!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
May 9th, 2011, 08:11 PM | #146 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
well it is only a couple more days left before she flies
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 10th, 2011, 12:04 AM | #147 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
this is the blue scoop that i can get, candy blue i think?
the bike in the 2nd pic is like non metalic dark blue, model 2011 im told, but i dont know what blue is what tbh...
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 10th, 2011, 12:32 AM | #148 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Ahh! I want the RX2N, just wish I had the money right now I'm so torn between that or my area P. Lets hope we have another group buy in a couple months?
|
|
May 10th, 2011, 03:24 AM | #149 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
get the area P.... i think thats like the best thing you can buy for the ninjette. i was almost heart broken when i crashed the bike and thought i totaled it... but it survived! i epoxied the scratches and the minor cracks and flipped it around (now i have the seam facing out) but it looks better than seeing the remnants of the scratches
when you have saved up enough i can always send one directly. shipping will cost more since its going international, and the guys getting it now are just lucky and get a free ride till vegas with my girlfriend, lol. this thread will be open indefinitely. so anyone wanting anything can just post and ill update prices as of the time asked (since prices change and also the exchange rates). cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 10th, 2011, 05:02 AM | #150 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
May 11th, 2011, 06:58 AM | #151 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
OK, I finally caught back up in this thread. I'd love to experiment with your old part if you're sure you won't be using it. If you find someone willing to pay more for it, well, then you are welcome to sell it to them, but I'll gladly pay $15 and shipping. The factory ColorRite paints for Candy Plasma Blue are expensive but I believe TheDuck has found an excelent alternative that is a very close match and I could put them to other good uses if this turns out well.
|
|
May 11th, 2011, 07:54 AM | #152 |
Only the good die young
Name: Aaron
Location: Vegas baby!!
Join Date: Mar 2011 Motorcycle(s): 2011 ninja 250r SE Posts: 86
|
Is it over? Im interested in the airscoop )
|
|
May 11th, 2011, 08:16 AM | #153 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
@ CZroe, pm me your paypal acc, and ill send you a payment request for 15$
@ play2pwn, what color are you interested in? id have to see if i can get it before the week end. pass me your paypal acc too and if i can get the color you want, ill send you a payment request for $32.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 11th, 2011, 10:07 AM | #154 | |
Only the good die young
Name: Aaron
Location: Vegas baby!!
Join Date: Mar 2011 Motorcycle(s): 2011 ninja 250r SE Posts: 86
|
Quote:
Im interested in the white but I gotta make a paypal acc. 1st And those ktc hand grips color red and how much? |
|
|
May 11th, 2011, 10:33 AM | #155 |
ninjette.org member
Name: Kevin
Location: Fountain
Join Date: Feb 2010 Motorcycle(s): 09 ninja 250 special edition Posts: 29
|
How are those flush turn signals? and i am interested in a green scoop is it too late?
|
|
May 11th, 2011, 08:51 PM | #156 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
@ play2pwn, im asking the price for the hand grip will let you know when i find out. do you still want a white scoop? im checking with the shop if they have one in stock.
@ cool runnings racing, i haven't tried the flush mounts so i dont really know, ive seen them on a parked bike, looks good. and has a lot of LED's. if you send me your paypal info i can send you a payment request for the scoop, the green scoop is available, i just called and checked. W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 11th, 2011, 09:44 PM | #157 | |
Only the good die young
Name: Aaron
Location: Vegas baby!!
Join Date: Mar 2011 Motorcycle(s): 2011 ninja 250r SE Posts: 86
|
Quote:
And yes I want a white airscoop forget about the grips |
|
|
May 12th, 2011, 12:54 AM | #158 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
found the red hand grips, they cost like 125.000 Rp, which is about $15 i can still get it if you want.
i just spoke with sarapacman on skype, he said that if i can find a second white one to get it and send him the paypal request, so i just need to wait and see if i can get one before the week end. just waiting on a reply from Kevin regarding the green scoop now. cheers. W ps, picked up all three koso sets. ill post pictures when i get home from work.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 12th, 2011, 03:51 AM | #159 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
I've seen something that looks like a frame slider but for the exhaust, have you seen that? Any idea of what the cost could be?
Do the grips comes with bar ends? |
|
May 12th, 2011, 03:55 AM | #160 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
Forgot to ask, do those ktc mirrors extend?
If so I want a pair in black. if not, do you know of some extensions? Thanks. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
South East Texas | Plague37 | Group Rides and Local Events | 5 | March 11th, 2015 11:50 PM |
South-East England Anyone? | Kokosun | Group Rides and Local Events | 23 | August 12th, 2013 01:54 AM |
South East Race Organazation | RacerX113 | Ninjettes At Speed | 10 | October 20th, 2012 05:16 PM |
New guy from the south east | Center6701 | New Members | 10 | March 22nd, 2010 12:44 PM |
South EAST! | Obsidian | Group Rides and Local Events | 19 | July 5th, 2009 03:05 PM |
|
|