September 9th, 2011, 10:44 PM | #1 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
T-Rex stands
My order of T-rex stands came in today. Love arriving home from work and finding a box by my door.
Brought inside to begin assembly and took some pics along the way. Cat needed to investigate. Packaging was excellent Assembly was straight forward. I ordered the triple tree setup which also came with fork lift adapters as well After adjusting the triple adjuster up one hole the setup works great with clearance on the front Putting the bike onto stands and taking it down really takes no effort at all. So far my impressions are good of the product. Did not find any flaws in the coating or bolt hole alignment. |
|
September 9th, 2011, 10:51 PM | #2 |
ninjette.org member
Name: LOU
Location: Imperial County, California
Join Date: Nov 2010 Motorcycle(s): GreenSE 09 250R Posts: 247
|
On tuesday i should have a similar box at my doorstep
|
|
September 9th, 2011, 11:24 PM | #3 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
This is the set I ordered t-rex-racing
|
|
September 10th, 2011, 12:32 AM | #4 |
ninjette.org certified postwhore
Name: Brian
Location: Detroit, MI
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.
|
Glad you like them. They scream quality. FYI, if you wash the bike on those stands, shake the water out of them. The outside is super nicely coated but it's still metal. The water inside will rust the pipe from the inside and the next time you move the stand, the water will leak out leaving a rust colored stain on the floor.
|
|
September 10th, 2011, 08:31 PM | #5 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
Your bike is dirty
__________________________________________________
#1 |
|
September 11th, 2011, 08:03 PM | #6 |
ninjette.org member
Name: Kane
Location: Las Vegas
Join Date: Aug 2011 Motorcycle(s): 2010 Ninja 250 Posts: 40
|
did u have to buy spools? or just the set
|
|
September 11th, 2011, 08:52 PM | #7 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
|
|
September 11th, 2011, 09:20 PM | #8 |
ninjette.org member
Name: Kane
Location: Las Vegas
Join Date: Aug 2011 Motorcycle(s): 2010 Ninja 250 Posts: 40
|
awesome thanks, just ordered me a rear & front. Thanks for the pics and link.
|
|
September 12th, 2011, 02:45 PM | #9 | |
ninjette.org guru
Name: Kurgan
Location: Texas
Join Date: Aug 2011 Motorcycle(s): '09 Ninja 250R Posts: 260
|
Quote:
And someone said the stands come with spools, but I see them as an extra on their site, do they ask you the type and size or just give you something generic that might not fit? I want to add these to my Christmas list so I won't be the one ordering so I want to make sure they send the right stuff when a non-rider orders. |
|
|
September 12th, 2011, 03:17 PM | #10 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
S and V are for different handles, its a matter of what you like.
The spools are part of a sale going on as stated on the main page. On checkout I had to specify what bike I was going to use the stands for so spools would be the correct size. |
|
September 15th, 2011, 02:17 PM | #11 |
ninjette.org member
Name: LOU
Location: Imperial County, California
Join Date: Nov 2010 Motorcycle(s): GreenSE 09 250R Posts: 247
|
Well got my stands yesterday. After putting it together i noticed a couple of things.
First off, Tripple tree stand dint come with as much padding as Steve's did. Mine only has a bit of padding on the tude that holds the pin and its only a strip. Second, I ordered the red and my paint has several spots that have the paint rubbed out, already showing metal one spot is bad and the others is me being picky but hey its brand new!!! I like the stand very firm looks real good but im going to call and give'm an ear full LOL |
|
October 19th, 2011, 02:49 PM | #12 |
ninjette.org member
Name: LOU
Location: Imperial County, California
Join Date: Nov 2010 Motorcycle(s): GreenSE 09 250R Posts: 247
|
Talked to a rep from Trex and they were very helpfull.
End result- Asked if i would like $XX amount of money as a discount for the damage. Told them i was not interested in the $ and just wanted the o rings, said they would happily send them to my addres. Would recommend, great service and people, great stand . |
|
October 19th, 2011, 03:25 PM | #13 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
are they $150 for front and rear? damn cycle gear got me on my pitbull stand, i paid $150 for just the rear..lol!
__________________________________________________
#1 |
|
October 19th, 2011, 03:59 PM | #14 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
. Imma get these
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
October 19th, 2011, 04:11 PM | #15 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
My set of stands are holding up great so far.
|
|
October 19th, 2011, 04:19 PM | #16 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
fuuuuuuuuuuuuuuuuuuuuu
they arent in stock.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
October 19th, 2011, 04:21 PM | #17 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
when i was in cycle gear a few weeks back, they had a set of black stands ( dont know the name ) that were like $50 a pc! front/rear.. that was a awesome deal IMO considering when i needed my stand all they had was the $150 pitbull stands..loL!
__________________________________________________
#1 |
|
October 25th, 2011, 12:39 PM | #18 |
ninjette.org sage
Name: Andy
Location: Indianapolis
Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771
|
T-Rex Front stand
I have this stand for my bike:
http://t-rex-racing.com/catalog.php?item=31 I also have one helluva time getting the bike on the stand. It seems like the forks (don't know what to call the parts that actually touch the bike) are too wide… any suggestions on what I can do? |
|
October 25th, 2011, 12:47 PM | #19 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/merged with other t-rex stand thread
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
November 2nd, 2011, 05:16 PM | #21 |
Dakine...
Name: AJ
Location: DFW
Join Date: Jun 2011 Motorcycle(s): 2009 Ninja 250R (Sold) | 636 (hopefully soon) Posts: A lot.
Blog Entries: 5
|
my triple tree stand was shipped today...cant wait. too bad this post was not posted before i bought my vortex rear stand...i would have just ordered the set oh well. I got the red one coming in
|
|
November 2nd, 2011, 06:29 PM | #22 |
Coastie Tweet
Name: Randy
Location: E City, NC
Join Date: Mar 2011 Motorcycle(s): 2011 250R Ebony, 2012 BMW F800R White Posts: 158
|
I got my T-rex rear stand when I ordered their Frame Sliders. So far I love it. When i decide its time to buy a front stand I will go back to them for it.
__________________________________________________
Randy USCG Air Station Elizabeth City |
|
November 10th, 2011, 11:55 PM | #23 |
ninjette.org member
Name: Andrew
Location: Orlando, FL
Join Date: Jun 2011 Motorcycle(s): 2014 300 Posts: 162
|
I have a t-rex rear stand and I leave my bike up on it whenever its in the garage.
The arm extensions are starting to warp... anyone else have this problem? |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Icon Overlord Prime jacket, Dainese Wave Air back protector, T-Rex stands | Trailerboy531 | Gear-related | 2 | September 6th, 2013 08:21 PM |
T-Rex Motorcycle Stands | cifex | Motorcycle-related | 12 | September 4th, 2013 04:17 AM |
T-rex race stands and spools? | ericeng91 | 2008 - 2012 Ninja 250R Farkles | 9 | April 14th, 2011 01:27 PM |
[topix.net] - Traverston, Inc. Delivers the All New V-REX and V-REX-2 Motorcycles Wor | Ninjette Newsbot | Motorcycling News | 0 | April 7th, 2011 12:20 AM |
For Sale: T-Rex Racing Stands | grn09segirl | Motorcycle-related | 11 | November 29th, 2010 02:41 PM |
|
|