January 21st, 2019, 06:37 PM | #1 |
ninjette.org newbie
Name: Juliana
Location: Davis
Join Date: Jan 2019 Motorcycle(s): Ninja 250 2012 Posts: 4
|
Carburetor hosing help!!!
My stupid self took apart my bike to clean the carbs and now I cant remember where some of the vacuum lines go and why my idle adjustment knob is just dangling out the side of my bike :I please help. I've attached pretty clear photos!
|
|
January 22nd, 2019, 07:07 AM | #2 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
January 22nd, 2019, 09:15 AM | #3 | |
ninjette.org newbie
Name: Juliana
Location: Davis
Join Date: Jan 2019 Motorcycle(s): Ninja 250 2012 Posts: 4
|
Quote:
I have already got all vacuum tubes connected to the gas tank and petcock :I I was thinking maybe one of the mystery lines were the overflow tube? Where is that connected too? The other one is connected too the t tubing, but all photos I've seen show where the bottom two tunes go (one goes to petcock, one goes Into carbs) but doesn't show where the central line comes from |
|
|
January 22nd, 2019, 10:24 AM | #4 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
https://faq.ninja250.org/wiki/File:Routing.gif
this should be ALL hoses from carbs to tank on a Ca model
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
January 22nd, 2019, 03:10 PM | #5 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
just realized this thread is posted in the wrong (300) section....
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
January 22nd, 2019, 05:27 PM | #6 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Also the diagrams are for pre-gen '88-07 bikes. She's got a new-gen '08-12.
I think there's a new-gen diagram somewhere... back in bit... |
|
January 22nd, 2019, 05:30 PM | #7 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Idle-adjuster goes underneath carbs to left side of bike.
You'll see wire loop (shepherd's crook) that holds a split grommit. Shove cable into split in grommit. |
|
January 22nd, 2019, 06:57 PM | #8 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
good @DannoXYZ .... a most knowledgeable Ca member to help out....I've actually seen just 1 Ca model, an EX500 at that, around 10 years ago.
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
January 22nd, 2019, 09:16 PM | #10 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
This is vent tube for carbs. Dumps excess petrol in event of overflow.
It should go down between two rubber tubes between carbs down to centre of bike. Exit by rear shock next to crankcase vent tube and gas-tank vent tube |
|
January 22nd, 2019, 10:12 PM | #11 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
This air suction valve is located between cylinder-head valve-cover and frame.
Short big hose connects to valve cover. Long big hose connects to airbox. Medium small hose connects to... Yup... that right! |
|
January 23rd, 2019, 12:37 PM | #12 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carburetor routing | Abelburnem | 2008 - 2012 Ninja 250R Tech Talk | 4 | October 7th, 2017 08:32 AM |
carburetor | skip | 2008 - 2012 Ninja 250R Tech Talk | 9 | June 5th, 2017 12:39 PM |
Carburetor Cleaning | Motofool | Videos | 3 | May 20th, 2014 08:42 PM |
carburetor bolts | james250ninja | 2008 - 2012 Ninja 250R Tech Talk | 3 | September 2nd, 2011 01:53 PM |
Carburetor Heads Up | Jakester9500 | 1986 - 2007 Ninja 250R Tech Talk | 14 | March 31st, 2010 09:44 AM |
Thread Tools | |
|
|