OEM Front Seat (no cover), pieces of OEM Seat Material, and Kleen Air Removal Kit

nattygirl · April 28th, 2011, 10:21 PM

I bought an OEM front seat that was used off ebay so I could strip the material off and use it to cover the rubber on the solo cowl. I just finished that project. Looks great! So know I have a few things to sell.

I have a OEM Front Seat with no cover on it (I'll post pics tomorrow) if anyone is interested. You can use it if you want to try shaving the seat and don't want to mess up your seat, or if you plan to buy an aftermarket seat cover, and don't want to hassle with removing the OEM material off your own seat. I'm asking $10 plus shipping. (Sold!)

I also have three pieces of OEM Seat Material. Cut big enough to cover the rubber piece on a solo cowl. $8 each, shipped. (Sold!)

I also removed my Kleen air system from my ninja today. The kit I bought off ebay came with two plates, so I have an extra one to sell. The kit I will sell you will include an alluminum emissions block plate, and two plugs. One to plug the T-connector and another plug to cover the hole on the airbox. My bike is a cali model, so I actually capped it at another T connector (shown in fourth pic) and not the airbox. I have caps for both though, so let me know which model you have and I'll give you the right one. $12 shipped. (Sold!)

kkim · April 28th, 2011, 11:22 PM

you have a PM.

sixer · April 28th, 2011, 11:42 PM

Don't mean to intrude but what's the block plate for? Last kleen air mod I did was T cap_ tank side hoses and air box plug??
Posted via Mobile Device

nattygirl · April 29th, 2011, 06:34 AM

It's just for a cleaner install. It's not required. Sold, by the way to KKIM pending payment.

Instead of this....

You have this...

Bo0stZomb13 · April 30th, 2011, 05:35 AM

Pm me your payal. Ill take one of those seat pieces.

Green Streak · April 30th, 2011, 05:50 AM

Sent PM.

nattygirl · May 2nd, 2011, 11:15 AM

PMs replied to. One piece of seat material has been sold. Two pieces left.

want1sobad · May 2nd, 2011, 12:31 PM

nat,

what did you use to secure the material to the cowl bumper? i'm looking to do the same thing.

thanks

pokey_binkey · May 2nd, 2011, 12:38 PM

PMed you.

nattygirl · May 2nd, 2011, 01:18 PM

Quote:

Originally Posted by want1sobad

nat,

what did you use to secure the material to the cowl bumper? i'm looking to do the same thing.

thanks

I just used a staple gun and some pliers. I know other members used spray adhesive as well, but I didn't use it. There is a bit of a gap between the cowl rubber and the cowl itself. Probably cause my staples were slightly thick. Smaller, thinner staples would probably work better. I noticed the OEM staples on the front seat were slimmer and flatter. I'll let you know the staple size I used later today. Right now the box is at home.

OEM seat sold.

nattygirl · May 13th, 2011, 11:03 AM

Got two pieces of OEM fabric still left for the solo cowl rubber. $8 each shipped. Everything else is sold. PM me if your interested.

ladyrocket · May 13th, 2011, 07:46 PM

I definitely would like a piece of the fabric, I will PM you!

nattygirl · May 25th, 2011, 01:05 PM

Bump!!! One piece of seat fabric left!!!

jshox · May 25th, 2011, 01:21 PM

do you have a link for the kit you bought on ebay?

nattygirl · May 28th, 2011, 08:34 AM

This is the kit I bought. It doesn't refer to a 250, but it does fit.

http://item.mobileweb.ebay.com/viewi...id=30781979821

nattygirl · June 8th, 2011, 11:06 AM

Everything is sold! Can you please lock this thread? And thanks to everyone who purchased!

kkim · June 8th, 2011, 12:26 PM

Thank YOU, Nat.

Just wanted to post before the "lock troll" sees your request.

Alex · June 8th, 2011, 09:48 PM

/locked

April 28th, 2011, 10:21 PM	#1
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	OEM Front Seat (no cover), pieces of OEM Seat Material, and Kleen Air Removal Kit I bought an OEM front seat that was used off ebay so I could strip the material off and use it to cover the rubber on the solo cowl. I just finished that project. Looks great! So know I have a few things to sell. I have a OEM Front Seat with no cover on it (I'll post pics tomorrow) if anyone is interested. You can use it if you want to try shaving the seat and don't want to mess up your seat, or if you plan to buy an aftermarket seat cover, and don't want to hassle with removing the OEM material off your own seat. I'm asking $10 plus shipping. (Sold!) I also have three pieces of OEM Seat Material. Cut big enough to cover the rubber piece on a solo cowl. $8 each, shipped. (Sold!) I also removed my Kleen air system from my ninja today. The kit I bought off ebay came with two plates, so I have an extra one to sell. The kit I will sell you will include an alluminum emissions block plate, and two plugs. One to plug the T-connector and another plug to cover the hole on the airbox. My bike is a cali model, so I actually capped it at another T connector (shown in fourth pic) and not the airbox. I have caps for both though, so let me know which model you have and I'll give you the right one. $12 shipped. (Sold!) __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents Last futzed with by nattygirl; June 8th, 2011 at 11:06 AM. Reason: Pics Added

April 29th, 2011, 06:34 AM	#4
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	It's just for a cleaner install. It's not required. Sold, by the way to KKIM pending payment. Instead of this.... You have this... __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents Last futzed with by nattygirl; May 2nd, 2011 at 11:14 AM.

April 30th, 2011, 05:50 AM	#6
Green Streak Ninjette Owner Name: Rick Location: Aiken County, SC Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R SE, a puddle of Ninja ZX6 Posts: 520	Sent PM. __________________________________________________

May 2nd, 2011, 11:15 AM	#7
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	PMs replied to. One piece of seat material has been sold. Two pieces left. __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

May 13th, 2011, 11:03 AM	#11
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	Got two pieces of OEM fabric still left for the solo cowl rubber. $8 each shipped. Everything else is sold. PM me if your interested. __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

April 28th, 2011, 11:22 PM	#2
kkim Join Date: Nov 2008 Posts: Too much.	you have a PM.

April 28th, 2011, 11:42 PM	#3
sixer no joy Name: Six Location: Cali Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408	Don't mean to intrude but what's the block plate for? Last kleen air mod I did was T cap_ tank side hoses and air box plug?? Posted via Mobile Device

April 30th, 2011, 05:35 AM	#5
Bo0stZomb13 ninjette.org member Name: Andrew Location: Pensacola / Jacksonville, FL Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r Posts: 97	Pm me your payal. Ill take one of those seat pieces.

May 2nd, 2011, 12:31 PM	#8
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	nat, what did you use to secure the material to the cowl bumper? i'm looking to do the same thing. thanks

May 2nd, 2011, 12:38 PM	#9
pokey_binkey ninjette.org member Name: Donna Location: Central, TX Join Date: May 2011 Motorcycle(s): Ninja 250R Posts: 12	PMed you.

May 13th, 2011, 07:46 PM	#12
ladyrocket ladyrocket Name: Megan Location: Cali Join Date: Dec 2010 Motorcycle(s): 09 Ninja 250R Posts: 84 Blog Entries: 1	I definitely would like a piece of the fabric, I will PM you! __________________________________________________ Never ride faster than your angel can fly

May 25th, 2011, 01:05 PM	#13
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	Bump!!! One piece of seat fabric left!!! __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

May 25th, 2011, 01:21 PM	#14
jshox Champion Name: Jerry Location: NC Join Date: Sep 2010 Motorcycle(s): '09 Ninja 250r SE Posts: 27	do you have a link for the kit you bought on ebay?

May 28th, 2011, 08:34 AM	#15
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	This is the kit I bought. It doesn't refer to a 250, but it does fit. http://item.mobileweb.ebay.com/viewi...id=30781979821 __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

June 8th, 2011, 11:06 AM	#16
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	Everything is sold! Can you please lock this thread? And thanks to everyone who purchased! __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

June 8th, 2011, 12:26 PM	#17
kkim Join Date: Nov 2008 Posts: Too much.	Thank YOU, Nat. Just wanted to post before the "lock troll" sees your request.

June 8th, 2011, 09:48 PM	#18
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	/locked __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Airbox removal + Kleen air removal?	MikeBudd	2008 - 2012 Ninja 250R Tech Talk	6	February 16th, 2012 04:57 PM
Where to get vinyl seat cover material?	CZroe	2008 - 2012 Ninja 250R Farkles	11	October 17th, 2011 12:49 AM
New Gen OEM Seat Material	KawiRider	Items Wanted	1	February 26th, 2011 09:35 AM