|
May 10th, 2024, 08:24 PM
|
#1 |
|
ninjette.org member
Name: Joshua
Location: Branson, MO
Join Date: May 2010 Motorcycle(s): 2008 Green Ninja 250 Posts: 13
|
Fuel Gauge Sensor Nipple Dripping
Hello...
I just got my gas tank repainted. When I put it all back together, the little nipple on the fuel gauge sensor is dripping fuel. I don't recall removing a hose and multiple threads have pointed out that nothing should be connected to it. Is it possible that the sensor mechanism was damaged in transit or the painting process? I'm assuming that it shouldn't be leaking. Would there be an issue with just covering the nipple? Does it need to "breathe" or anything? I'm supposed to be riding it, tomorrow, so a quick reply would be greatly appreciated. Thanks... JJ |
|
|
|
May 12th, 2024, 09:36 AM
|
#2 |
|
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
From looking at photos of the sensor, it pretty much has to either be leaking where the flange seals to the tank, or where the wires come out. A careful drying and inspection may let you see which it is.
|
|
|
|
|
May 12th, 2024, 11:00 AM
|
#3 | |
|
ninjette.org member
Name: Joshua
Location: Branson, MO
Join Date: May 2010 Motorcycle(s): 2008 Green Ninja 250 Posts: 13
|
Quote:
I was able to move them, but I didn't want to over-tighten them and strip the holes. I took it to a shop to put new handlebars on and I'm going to have them make sure they are torqued to spec. If it's still leaking, I will replace the gasket. I don't know why it started leaking. I'm guessing something must have happened during transport or painting. JJ |
|
|
|
|
|
May 12th, 2024, 11:28 AM
|
#4 |
|
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Maybe the paint was baked and the heat changed something.
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuel dripping fast from the vent tube / line | MagnaMan | 1986 - 2007 Ninja 250R Tech Talk | 12 | November 20th, 2016 09:07 PM |
| Replace Fuel Gauge with Fuel Light? | Proteus | 2008 - 2012 Ninja 250R Tech Talk | 8 | December 2nd, 2014 08:33 AM |
| My video on how to fix the fuel sender for your fuel gauge | Klint | 2008 - 2012 Ninja 250R Tech Talk | 1 | November 2nd, 2013 09:04 PM |
| Took off fuel tank and petcock is dripping gas... | Navigon | 2008 - 2012 Ninja 250R Tech Talk | 31 | February 4th, 2013 07:16 PM |
| Fuel tank/Fuel gauge issues | coolcatjames | 2008 - 2012 Ninja 250R Tech Talk | 10 | August 23rd, 2012 06:25 PM |
|
|
