ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old January 15th, 2014, 01:55 PM   #1
old3
ninjette.org sage
 
Name: Jim
Location: NJ
Join Date: Nov 2012

Motorcycle(s): Ninja 300, KTM EXC610SMR

Posts: 913
Fork brace interest

Hey, I just sent a email to Blair at SV Racing, the guy who built the excellent rear sets I and many others have bought.

I asked him if he might be willing to fab up a run of Ninja 300 braces for the fork tubes. If I'm not mistaken, the 250 has all the same front end parts and as long as it would clear the fender, they should be the same from 08-12 so I'm asking here too.

If you are interested in one, post up. I'll let him know if there is a group of us, and why not let me know if you might be willing to prepay or give a deposit too? It might help get it off the ground.

This is his brace for the DL650 Suzukis.

http://www.svracingparts.com/product...77&id=29919958

He has been a great vendor IMO, very quick to reply to questions and his stuff is made in the U.S.A. in his shop. The rear sets are great quality parts.

Thanks for looking!

Last futzed with by old3; January 15th, 2014 at 03:30 PM.
old3 is offline   Reply With Quote




Old January 15th, 2014, 02:06 PM   #2
DCMoney
ninjette.org guru
 
DCMoney's Avatar
 
Name: Andrew
Location: St Louis
Join Date: Sep 2013

Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750

Posts: 368
Quote:
Originally Posted by old3 View Post
Hey, I just sent a email to Blair at SV Racing, the guy who built the excellent rear sets I and many others have bought.

I asked him if he might be willing to fab up a run of Ninja 300 braces for the fork tubes. If I'm not mistaken, the 250 has all the same front end parts and as long as it would clear the fender, they should be the same from 08-12 so I'm asking here too.

If you are interested in one, post up. I'll let him know if there is a group of us, and why not let me know if you might be willing to prepay or give a deposit too? It might help get it off the ground.

This is his brace for the DL650 Suzukis.

http://www.svracingparts.com/product...77&id=29919958

He has been a great vendor IMO, very quick to reply to questions and his stuff is made in the U.S.A. in his shop. The rear sets are great quality parts.

Thanks for looking!
Bad link. Assuming your talking about this though, Link

Not sure Id buy one.
__________________________________________________
MCRA.com
DCMoney is offline   Reply With Quote


Old January 15th, 2014, 03:30 PM   #3
old3
ninjette.org sage
 
Name: Jim
Location: NJ
Join Date: Nov 2012

Motorcycle(s): Ninja 300, KTM EXC610SMR

Posts: 913
Yep, don't know how I screwed that up! Thanks!

I'll try to correct it in my post.
old3 is offline   Reply With Quote


Old January 15th, 2014, 03:48 PM   #4
old3
ninjette.org sage
 
Name: Jim
Location: NJ
Join Date: Nov 2012

Motorcycle(s): Ninja 300, KTM EXC610SMR

Posts: 913
Hey, heads up, Blair is going to build them so never mind posting or deposits or any of that!

I just got his reply. 250s and 300s, no problem. He needs a few weeks to set them up and fit.

I gotta restate it, the SV Racing rear sets I bought from him are excellent, made in the USA and top notch products. 2 NJ winters, covered in road salt again today, 10k miles and tight as new. I expect another top level part in the brace.

Thanks Blair!
old3 is offline   Reply With Quote


Old January 17th, 2014, 09:36 AM   #5
bitaria
ninjette.org member
 
Name: Oleg
Location: Seattle WA
Join Date: Aug 2013

Motorcycle(s): CRF450X, CRF250R/SM, Husky 630 SMS, Ninja 250R

Posts: 144
I'm interested, but not going to a high priority purchase. In general with these bikes fork brace is built in as the fender mounting bracket. Some people remove it, but that's not a good idea unless replacing with an aftermarket brace.

Post up ride impressions comparing the two, would be interested to see!
bitaria is offline   Reply With Quote


Old January 17th, 2014, 09:42 AM   #6
Xtina
ninjette.org guru
 
Xtina's Avatar
 
Name: Christina
Location: Toronto
Join Date: Jul 2012

Motorcycle(s): 2013 Ninja 300, 2007 Gsxr 600, R6-sold :(

Posts: 270
I had a brace on my cbr 250. It does make a big difference.
Xtina is offline   Reply With Quote


Old January 17th, 2014, 11:37 AM   #7
DaveTheCanuck
Moo
 
DaveTheCanuck's Avatar
 
Name: David
Location: Toronto'ish, Canada
Join Date: Feb 2012

Motorcycle(s): 2013 Ninja 300

Posts: 103
I'd be interested if these are manufactured
DaveTheCanuck is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Interested in a fork brace? Post!!! old3 2013 - 2017 Ninja 300 Farkles 13 December 20th, 2014 12:34 AM
Fork brace for a 2003 250R Matty54 1986 - 2007 Ninja 250R Tech Talk 8 October 13th, 2014 07:20 PM
FS: pregen SuperBrace fork brace choneofakind Motorcycle-related 3 August 4th, 2014 06:05 PM
[webbikeworld.com] - SuperBrace Fork Brace Review Ninjette Newsbot Motorcycling News 0 July 16th, 2012 02:40 PM
[2wf.com] - SuperBrace Fork Brace Ninjette Newsbot Motorcycling News 0 December 19th, 2008 02:43 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 04:50 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.