ninjette.org

Go Back   ninjette.org > General > Ninjettes At Speed

Notices

Reply
 
Thread Tools
Old October 24th, 2017, 07:21 AM   #1
redonninrf
ninjette.org member
 
Name: Randy
Location: Portland OR
Join Date: Jul 2016

Motorcycle(s): 2008 Ninja 250R, 2017 Triumph Thruxton 1200 Classic (not the 'R')

Posts: 44
Couple Questions on AiM Solo and 2008-2012 Ninjette

First question is really a favor. If anyone has mounted an AiM Solo on their 2008-2012 EX250 would love to see a picture of the mounted device.

Second question is two part: The DL version of the Solo can read a bike or car's ECU. AiM does not officially support the EX250. Has anyone managed to adapt a Solo DL to read their Ninjette's ECU? If so, does the ECU give anything useful other than RPM?

Thanks in advance.
redonninrf is offline   Reply With Quote




Old October 24th, 2017, 11:42 AM   #2
AwDang
ninjette.org guru
 
Name: Pat
Location: SW VA
Join Date: Feb 2015

Motorcycle(s): 286, 296, 599, 799

Posts: 436
Ninjette doesn't have a CAN driver so DL will do you no good.
You'll need to go to something with analog channels to datalog.

I removed the dash and welded a piece of sheet metal to the fairing stay for our Solo.
AwDang is offline   Reply With Quote


Old October 24th, 2017, 01:56 PM   #3
redonninrf
ninjette.org member
 
Name: Randy
Location: Portland OR
Join Date: Jul 2016

Motorcycle(s): 2008 Ninja 250R, 2017 Triumph Thruxton 1200 Classic (not the 'R')

Posts: 44
Quote:
Originally Posted by AwDang View Post
Ninjette doesn't have a CAN driver so DL will do you no good.
You'll need to go to something with analog channels to datalog.

I removed the dash and welded a piece of sheet metal to the fairing stay for our Solo.
Thanks! After submitting my post realized my second question about the ECU was, how shall I say, 'uninformed'. I've got a couple leads on used Solos and just wanted to make sure there wasn't a good reason to hold out for a Solo DL. For now it is a track day/daily rider so a plain Solo should be good enough.
redonninrf is offline   Reply With Quote


Old October 24th, 2017, 03:00 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
The ECU is just controls a 2D RPM-based ignition map. So all you're gonna get out of it is RPM data.

Although if you tie in to the crank-sensor signal, you can obtain the actual amount of ignition-advance. Not sure how helpful that is though.
DannoXYZ is offline   Reply With Quote


Old October 24th, 2017, 06:25 PM   #5
cbinker
Track Clown
 
cbinker's Avatar
 
Name: Chris
Location: Kingman, AZ
Join Date: May 2012

Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build

Posts: A lot.
MOTM - Sep '15
Here is my set up, had a buddy weld a plate for me.
Attached Images
File Type: jpg Tach far.jpg (71.7 KB, 7 views)
File Type: jpg Close solo:tach.jpg (71.3 KB, 6 views)
__________________________________________________

TEAM ALFALFA
www.apexassassins.com
cbinker is offline   Reply With Quote


Old November 10th, 2017, 03:58 PM   #6
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
I think it's the same set up on the 250s and the 300s. Since I have clip ons, I just used the OEM handlebar mounting holes. Used a small piece of aluminum plate to mount the AIM mounting bracket.

Mechanikrazy is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
A Couple of questions bigreddog 2008 - 2012 Ninja 250R Tech Talk 2 August 27th, 2015 05:19 PM
Thanks Ninjette.org, and a Couple Questions Dredgshadow General Motorcycling Discussion 16 June 26th, 2013 03:37 PM
Couple of questions ninjaryda 1986 - 2007 Ninja 250R Tech Talk 7 April 20th, 2013 05:14 PM
Couple of quick questions zach 1986 - 2007 Ninja 250R Tech Talk 10 July 8th, 2009 06:47 PM
Couple of questions pantera 2008 - 2012 Ninja 250R Tech Talk 5 May 6th, 2009 01:27 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 08:01 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.