|
July 21st, 2010, 01:36 PM
|
#1 |
|
ninjette.org member
Name: D'Arcey
Location: NJ
Join Date: Jun 2010 Motorcycle(s): 1989 Ninja 250 / 1997 Bandit 1200S Posts: 13
|
How to test coolant temp sensor?
I thought i had both the base service manual and the supplement, as thats how the files are labeled....but it turns out theyre both the supplement! Oh no!
Does anyone know the procedure for testing the temp sensor? I need proper resistance and all... thanks in advance. |
|
|
|
July 21st, 2010, 03:50 PM
|
#2 |
|
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Testing is pretty simple. Use a pot of water on the stove, thermometer in the water, temp sender probe portion in the water. Use an ohm meter, hook onto the lug and sender body. Start heating the water....
I dont have the resistance numbers handy for the older model, Iam sure there pretty close to the new gen  122 deg F 210 Ohms 240 deg F 21 Ohms |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Koso Oil Temp Sensor Adapter & Water Temp Sensor Adapter | StaylorT | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 24th, 2014 12:38 AM |
| oil temp vs coolant temp | cuong-nutz | General Motorcycling Discussion | 11 | January 23rd, 2013 05:44 PM |
| WTB: Pre-Gen Water Temp Sensor!! | bluebr65 | Items Wanted | 3 | January 5th, 2012 09:45 AM |
| WTB 08+ Water Temp Sensor | charri | Items Wanted | 0 | July 26th, 2011 07:05 PM |
| Where is the water temp sensor? | wild-bill | 2008 - 2012 Ninja 250R Tech Talk | 2 | December 24th, 2010 10:32 PM |
|
|
