July 19th, 2012, 09:24 AM | #1 |
ninjette.org member
Name: Alex
Location: Providence, RI
Join Date: Jul 2011 Motorcycle(s): 2009 Ninja 250R Posts: 76
|
Bike has trouble starting
Recently, I have some trouble starting my bike. I had to press the Start button couple times before it fired up. This morning, I had it fired up, ran it a bit, stopped to drop a mail. When I came back, I had to press 20 times before it fired up again. Once it run, no problem though.
Any ideas ? Battery ? Spark Plugs ? A little more info: Bike has been used regularly (at least 4 times a week), gas is almost full, oil is good, 7500 miles on it. Bike has been running perfectly before this happened. No recent mods. |
|
July 19th, 2012, 09:26 AM | #2 |
ninjette.org member
Name: Pshyk
Location: Fairbanks,AK
Join Date: Jun 2012 Motorcycle(s): 2012-250R Posts: 202
|
starter maybe? =/
got a vid? |
|
July 19th, 2012, 09:28 AM | #3 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
When's the last time you adjusted the valves?
When you had trouble, did it start better with throttle or choke? How hot was the engine when you had problems starting? Have you touched your carbs at all? Posted via Mobile Device |
|
July 19th, 2012, 09:35 AM | #4 |
ninjette.org member
Name: Alex
Location: Providence, RI
Join Date: Jul 2011 Motorcycle(s): 2009 Ninja 250R Posts: 76
|
I've never touch the carb. The valve has not been checked. It was 85 when I started it. When I pressed the Start button, just nothing happened, no sound, no click, nothing. After a couple times, it started like normal.
|
|
July 19th, 2012, 09:54 AM | #5 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
So, no electricity is reaching the starter?
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
July 19th, 2012, 10:04 AM | #6 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Your button was just acting up on you. They do that sometimes.
You sure the kill switch was at the on position? Posted via Mobile Device |
|
July 19th, 2012, 10:11 AM | #7 |
ninjette.org member
Name: Alex
Location: Providence, RI
Join Date: Jul 2011 Motorcycle(s): 2009 Ninja 250R Posts: 76
|
@Motofool: Exactly. But why did it come back after a couple presses ?
@choneofakind: If the bike started with the kill switch at off position, it'll be even weirder :P |
|
July 19th, 2012, 10:37 AM | #8 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
I would access the back of the starting bottom and would test it making a bridge with some wire.
That would indicate if that switch is the problem or if you need continuing checking the starter.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trouble starting bike. | Floki | General Motorcycling Discussion | 56 | January 2nd, 2015 03:28 PM |
Bike having trouble starting and running when cold | jwollam | 2008 - 2012 Ninja 250R Tech Talk | 10 | February 12th, 2013 06:47 PM |
Trouble with starting speed | vmlp | 1986 - 2007 Ninja 250R Tech Talk | 13 | May 26th, 2012 09:12 PM |
Trouble Starting | dlebe250 | 1986 - 2007 Ninja 250R Tech Talk | 7 | January 12th, 2011 07:47 AM |
trouble starting... | n4v1n | 2008 - 2012 Ninja 250R Tech Talk | 4 | August 9th, 2009 03:18 PM |
|
|