July 12th, 2013, 03:37 AM | #1 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
Power Outlet from (front) Accessory Wires
I want to add a cigarette lighter/power outlet to my pregen so that I can connect to GPS/camera/phone. I've located the accessory wires in the front, but have a question regarding actually connecting to them to the cigarette lighter. Has anybody done that? Do I need to strip the wires (on the cigarette lighter assembly), stick 'em into the accessory wires and then tighten up with pliers? Or, is there a better way?
There are loads of videos on YouTube about installing a cigarette lighter/power socket and there's good documentation on the Ninjette wiki. But, I haven't found anything that shows the actual connection to the accessory wires themselves. |
|
July 12th, 2013, 06:02 AM | #2 |
ninjette.org mafioso
Name: Ben
Location: Dillon, MT
Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R Posts: 337
|
I just connected my battery tender cable to the battery permanently, ran the wire out the side, and put a SAE to USB like this one on it. Routed a 6 foot USB extension to the instrument panel.
Haven't tried running a hub with multiple devices. |
|
July 12th, 2013, 06:43 AM | #3 |
ninjette.org member
Name: Max
Location: Amish Country
Join Date: Apr 2013 Motorcycle(s): '04 919 / '08 250r / '95 xr100 Posts: 39
|
NOt sure what the 'accessory wires' in the front of a pregen look like. but this is how I splice into existing auto wires.
http://www.youtube.com/watch?v=moMri-P-T6Y edit: embedded video owned me |
|
July 12th, 2013, 09:45 AM | #4 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Link to original page on YouTube.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
July 12th, 2013, 09:49 AM | #5 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
I'm just interested in connecting to the accessory wires at the front (inside the fairings just below the clip-ons ... next to the forks).
It'll be pretty simple to just stick the wires from the cigarette lighter into the accessory wires, and then tighten up with pliers. I just wanted to be sure that there wasn't an EVEN easier way. For example, maybe there are some special connectors that plug directly into the accessory wires. I haven't seen anything that says that there are such connectors, but maybe that's because it's so elementary that any 6-year old would already know that. :-) |
|
July 12th, 2013, 10:38 AM | #6 |
ninjette.org member
Name: Robert
Location: South of you blokes.
Join Date: May 2013 Motorcycle(s): '92 GPX 250 (Gone and replaced with '08 V-Strom), 2005 Suzuki C50. Posts: 186
|
If they are bullet connectors then yes, you can buy them, crimp them to your lighter socket and then simply plug it in.
|
|
July 12th, 2013, 11:10 AM | #7 |
ninjette.org member
Name: Max
Location: Amish Country
Join Date: Apr 2013 Motorcycle(s): '04 919 / '08 250r / '95 xr100 Posts: 39
|
|
|
July 14th, 2013, 07:03 AM | #8 | |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
Quote:
|
|
|
July 14th, 2013, 05:39 PM | #9 | |
ninjette.org member
Name: Robert
Location: South of you blokes.
Join Date: May 2013 Motorcycle(s): '92 GPX 250 (Gone and replaced with '08 V-Strom), 2005 Suzuki C50. Posts: 186
|
Quote:
|
|
|
July 20th, 2013, 10:30 PM | #10 |
ninjette.org member
Name: Jeff
Location: Niagara Region
Join Date: Mar 2013 Motorcycle(s): 2005 Ninja 250 Posts: 64
|
I'm a little late (been at the cottage) but the connectors on my pregen are female spade connectors. The little round loops at the edges are to make it easier for the male to find the slot, not for tiny bullet connectors. I got yellow male connectors to wire my usb socket. Blue ones would probably be alright you just might have trouble getting your lighter socket wires to fit into the blue male terminals.
|
|
July 20th, 2013, 10:46 PM | #11 | |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
Quote:
__________________________________________________
I'm not small, I'm fun sized |
|
|
July 21st, 2013, 01:03 PM | #12 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
I originally had a cigarette lighter plug zip tied to my dash, but it turned out that most of the stuff I was plugging into it was converting it to USB and then charging it. So I bought a USB cigarette lighter charger and hot wired that into the dash lights. There are accessory wires there, but they are hot all the time and the little Ninja battery can't handle something being left plugged in. The USB charger has two ports and works great. I had to use a little bondo, but I made it stick to the top of the dash and so far its worked flawlessly. It also cuts off when the bike is not running.
Unless you have a good reason not to, I recommend tapping the dash lights rather than the accessory wires.
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
August 3rd, 2013, 02:27 AM | #13 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
I'm still looking into this. I've now discovered that there are three types of (male) bullet connectors - red, blue and yellow. There may be more, but these are the three that keep coming up when I do searches. Red are sized 0.4mm-1mm, blue are 1.1mm-2.6mm and yellow are 2.5mm to 6.5mm.
But, what do those numbers mean? The end of a bullet connector looks pretty rigid to me. I can't see how it could fit anywhere from 2.5mm to 6.5mm ... that's a HUGE range. I haven't been able to measure the female terminals of the accessory wires and can't find any reference to how big they are. When I look at them, I would guess that they're somewhere between 3mm and 4mm. So, can anybody tell me what size/colour of make bullet connectors will fit the female accessory wires on a pre-gen? I guess that I could buy a (100x) count of the three different types and see which fit, but that seems wasteful (and would cost me £12). Thanks! |
|
August 3rd, 2013, 05:11 AM | #14 | |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
Quote:
What do you plan on plugging into the cigarette lighter jack?
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
|
August 3rd, 2013, 05:25 AM | #15 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
Sorry, I thought that those were bullet connectors - or at least double bullet connectors. I guess that those must be called spade connectors.
|
|
August 3rd, 2013, 05:55 AM | #16 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
You want a male spade connector. They are quite large so I'm guessing you want the yellow ones.
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
August 3rd, 2013, 06:25 AM | #17 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
I just went and looked again. They're definitely not spade connectors. They're side-by-side female bullet connectors. I've got a '01 US version bike. Does anybody know the correct size of connector to plug into the accessory wires?
|
|
August 3rd, 2013, 03:16 PM | #18 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
Its definitely a big spade connector. Probably a yellow or bigger. Does this female spade connector look more like it?
Just get the biggest made spade connector you can find and shove it in. If its too loose, then use a pair of pliers to crimp it a little and try again until the connector fits snug.
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
August 4th, 2013, 08:42 AM | #19 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
I've attached a photo of the accessory wires. Or at least, I hope that I have. They don't look like any spade connectors that I've been able to find online.
|
|
August 4th, 2013, 06:35 PM | #20 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
I suppose you could shove a bullet connector in there, but I used a big spade connector with no problems. It may actually be a dual style connector that takes both kinds.
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
August 15th, 2013, 07:05 AM | #21 |
MSF Coach!
Name: Lupe
Location: Antioch, Tennessee
Join Date: Jun 2012 Motorcycle(s): 2003 ninja 250 Posts: 886
|
i have rigged other connectors to fit those, always regretted it cuz they come unpluged every few 100 miles. best thing to do is to cut and recrimp with your desired connectors. it makes things 100 times easier in the long run and only takes 5 mins.
__________________________________________________
Hey Unregistered wanna ride the dragon? Ninjette group ride! May 16th-20th Join the Ride!!http://www.ninjette.org/forums/group.php?groupid=35 |
|
August 15th, 2013, 07:42 AM | #22 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
You know ... that sounds very sensible.
|
|
August 15th, 2013, 02:29 PM | #23 |
MSF Coach!
Name: Lupe
Location: Antioch, Tennessee
Join Date: Jun 2012 Motorcycle(s): 2003 ninja 250 Posts: 886
|
__________________________________________________
Hey Unregistered wanna ride the dragon? Ninjette group ride! May 16th-20th Join the Ride!!http://www.ninjette.org/forums/group.php?groupid=35 |
|
September 23rd, 2013, 10:00 AM | #24 | |
ninjette.org member
Name: Pete
Location: UK
Join Date: Aug 2012 Motorcycle(s): '11 250R SE (FI), '14 Daytona 675, '14 Sprint 1050 GT SE Posts: 121
|
Quote:
a bit late to this but I think those numbers would be the range of wire sizes that can safely be crimped? e.g. 0.4mm^2 to 1mm^2 cables should use red connectors. I would think you can get red connectors in a variety of actual female and male connectors, even different diameter bullet sizes but the red indicates the *wire* dimensions not the bullet dimensions I believe. HTH, Pete |
|
|
September 23rd, 2013, 02:26 PM | #25 |
ninjette.org member
Name: Jeff
Location: Niagara Region
Join Date: Mar 2013 Motorcycle(s): 2005 Ninja 250 Posts: 64
|
Just too add again, you want yellow male spade connectors. Trust me they fit see
|
|
September 23rd, 2013, 03:15 PM | #26 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
Seems like they are double bullet connectors rather than spade. However, I just used a spade connector and it worked. Those bullet connectors are sold pretty much everywhere. Probably available at Radio Shack, Home Depot or an auto parts place.
http://www.cycleterminal.com/bullet-terminals.html
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
September 24th, 2013, 12:33 AM | #27 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
Thanks for everybody responding to this. I really do appreciate the advice and suggestions. This forum is soooooo great. It's one of the things that makes owning a Ninjette so great - the wonderful people that ride them.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcycle.com] - Turn On: How To Install Switched Accessory Power To Your Motorcycl | Ninjette Newsbot | Motorcycling News | 0 | July 8th, 2014 01:50 PM |
The power of the front brake! | EthioKnight | Videos | 18 | June 6th, 2012 04:10 PM |
help me map gauge wires into harness wires | Kangxi | 2008 - 2012 Ninja 250R Tech Talk | 9 | April 18th, 2012 06:08 PM |
[motorcyclistonline] - Power to Spare with New Snap-On 12-Outlet Power Strip | Ninjette Newsbot | Motorcycling News | 0 | October 1st, 2010 03:40 PM |
Power Outlet Casco 212711C All Weather | addy126 | 2008 - 2012 Ninja 250R Farkles | 4 | July 26th, 2010 08:47 PM |
|
|