April 28th, 2011, 10:21 PM | #1 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
OEM Front Seat (no cover), pieces of OEM Seat Material, and Kleen Air Removal Kit
I bought an OEM front seat that was used off ebay so I could strip the material off and use it to cover the rubber on the solo cowl. I just finished that project. Looks great! So know I have a few things to sell.
I have a OEM Front Seat with no cover on it (I'll post pics tomorrow) if anyone is interested. You can use it if you want to try shaving the seat and don't want to mess up your seat, or if you plan to buy an aftermarket seat cover, and don't want to hassle with removing the OEM material off your own seat. I'm asking $10 plus shipping. (Sold!) I also have three pieces of OEM Seat Material. Cut big enough to cover the rubber piece on a solo cowl. $8 each, shipped. (Sold!) I also removed my Kleen air system from my ninja today. The kit I bought off ebay came with two plates, so I have an extra one to sell. The kit I will sell you will include an alluminum emissions block plate, and two plugs. One to plug the T-connector and another plug to cover the hole on the airbox. My bike is a cali model, so I actually capped it at another T connector (shown in fourth pic) and not the airbox. I have caps for both though, so let me know which model you have and I'll give you the right one. $12 shipped. (Sold!)
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents Last futzed with by nattygirl; June 8th, 2011 at 11:06 AM. Reason: Pics Added |
|
April 28th, 2011, 11:22 PM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
you have a PM.
|
|
April 28th, 2011, 11:42 PM | #3 |
no joy
Name: Six
Location: Cali
Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408
|
Don't mean to intrude but what's the block plate for? Last kleen air mod I did was T cap_ tank side hoses and air box plug??
Posted via Mobile Device |
|
April 29th, 2011, 06:34 AM | #4 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
It's just for a cleaner install. It's not required. Sold, by the way to KKIM pending payment.
Instead of this.... You have this...
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents Last futzed with by nattygirl; May 2nd, 2011 at 11:14 AM. |
|
April 30th, 2011, 05:35 AM | #5 |
ninjette.org member
Name: Andrew
Location: Pensacola / Jacksonville, FL
Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r Posts: 97
|
Pm me your payal. Ill take one of those seat pieces.
|
|
April 30th, 2011, 05:50 AM | #6 |
Ninjette Owner
Name: Rick
Location: Aiken County, SC
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R SE, a puddle of Ninja ZX6 Posts: 520
|
Sent PM.
__________________________________________________
|
|
May 2nd, 2011, 11:15 AM | #7 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
PMs replied to. One piece of seat material has been sold. Two pieces left.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
May 2nd, 2011, 12:31 PM | #8 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
nat,
what did you use to secure the material to the cowl bumper? i'm looking to do the same thing. thanks |
|
May 2nd, 2011, 12:38 PM | #9 |
ninjette.org member
Name: Donna
Location: Central, TX
Join Date: May 2011 Motorcycle(s): Ninja 250R Posts: 12
|
PMed you.
|
|
May 2nd, 2011, 01:18 PM | #10 | |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Quote:
OEM seat sold.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
|
May 13th, 2011, 11:03 AM | #11 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Got two pieces of OEM fabric still left for the solo cowl rubber. $8 each shipped. Everything else is sold. PM me if your interested.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
May 25th, 2011, 01:05 PM | #13 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Bump!!! One piece of seat fabric left!!!
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
May 25th, 2011, 01:21 PM | #14 |
Champion
Name: Jerry
Location: NC
Join Date: Sep 2010 Motorcycle(s): '09 Ninja 250r SE Posts: 27
|
do you have a link for the kit you bought on ebay?
|
|
May 28th, 2011, 08:34 AM | #15 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
This is the kit I bought. It doesn't refer to a 250, but it does fit.
http://item.mobileweb.ebay.com/viewi...id=30781979821
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
June 8th, 2011, 11:06 AM | #16 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Everything is sold! Can you please lock this thread? And thanks to everyone who purchased!
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
June 8th, 2011, 12:26 PM | #17 |
Join Date: Nov 2008 Posts: Too much.
|
Thank YOU, Nat.
Just wanted to post before the "lock troll" sees your request. |
|
June 8th, 2011, 09:48 PM | #18 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/locked
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Airbox removal + Kleen air removal? | MikeBudd | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 16th, 2012 04:57 PM |
Where to get vinyl seat cover material? | CZroe | 2008 - 2012 Ninja 250R Farkles | 11 | October 17th, 2011 12:49 AM |
New Gen OEM Seat Material | KawiRider | Items Wanted | 1 | February 26th, 2011 09:35 AM |
|
|