![]() |
![]() |
#1 |
Cruisin Down Hwy 1
Name: Lawrence
Location: San Francisco / Daly City / The Valley
Join Date: Mar 2011 Motorcycle(s): Ninja250r New Gen 2011 Posts: 24
|
What is the easiest method to remove the special edition decal design off my bike?
Ive seen people do it from pictures online...anybody got any remedies removing the sticker decals? Any help would be appreciated!
|
![]() |
![]() |
![]() |
#2 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
heat with a blow dryer - peel off.
use goo b gone to remove any adhesive residue finish up with a good wax/polish enjoy the results btw, welcome the forum "search" is your friend ![]() |
![]() |
![]() |
![]() |
#3 |
Cruisin Down Hwy 1
Name: Lawrence
Location: San Francisco / Daly City / The Valley
Join Date: Mar 2011 Motorcycle(s): Ninja250r New Gen 2011 Posts: 24
|
Thx bro!
|
![]() |
![]() |
![]() |
#4 |
Cruisin Down Hwy 1
Name: Lawrence
Location: San Francisco / Daly City / The Valley
Join Date: Mar 2011 Motorcycle(s): Ninja250r New Gen 2011 Posts: 24
|
question about using a blow dryer...do I peel a part of the decal before I start using the dryer?
|
![]() |
![]() |
![]() |
#5 |
Join Date: Nov 2008 Posts: Too much.
|
Use the heat to soften the glue that the sticker uses to adhere. I use a heat gun set on low and it works great.
So, heat a section of the sticker for a few seconds, start peeling the sticker from a corner in the heated area. As the sticker lifts, continue heating the next section of the sticker and continue pulling the sticker up off the plastic with your other hand. You'll know when you have the heating correct when the sticker lifts smoothly with out stretching or breaking into pieces. The goal is to get it off in as big of pieces that you can. ![]() after the decal is off, and the glue residue remains, use goo gone to get the glue removed. do not use goof off Last futzed with by kkim; April 21st, 2011 at 09:07 PM. |
![]() |
![]() |
![]() |
#6 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
more good advice from the master
![]() goo gone yes, goof off no |
![]() |
![]() |
![]() |
#7 | |
Cruisin Down Hwy 1
Name: Lawrence
Location: San Francisco / Daly City / The Valley
Join Date: Mar 2011 Motorcycle(s): Ninja250r New Gen 2011 Posts: 24
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#8 |
Join Date: Nov 2008 Posts: Too much.
|
one more tidbit... when I removed my sticker adhesive, even the goo gone didn't seem to work well, but I did find that lacquer thinner worked very well to remove all traces of the glue very easily. If you use lacquer thinner, I recommend using as little as possible and working quickly to avoid prolonged exposure to it on the paint.
In my younger years of working in a paint shop, lacquer thinner raised eyebrows anytime it was brought close to a finished painted product. ![]() |
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Easiest way to remove carbs? | chadh92 | 1986 - 2007 Ninja 250R Tech Talk | 22 | April 9th, 2013 06:59 PM |
How to remove a decal ? | bikermunda | 2008 - 2012 Ninja 250R Farkles | 23 | March 26th, 2013 05:43 AM |
07 ninja 250 flame decal remove?!? | holliealisha | 1986 - 2007 Ninja 250R Farkles | 6 | February 27th, 2012 04:39 PM |
how to remove adhesive from ninja decal? | str8t six | General Motorcycling Discussion | 13 | October 22nd, 2011 08:41 AM |
new decal design | yokozuna | Pictures | 8 | January 13th, 2011 06:54 PM |
|
|