January 8th, 2019, 10:10 AM | #1 |
ninjette.org newbie
Name: Leeroy
Location: North Austin, TX
Join Date: Jan 2019 Motorcycle(s): 2011 Ninja 250EX Posts: 2
|
Exhaust slip-on fit?
Hi I'm new to this thread, so if this is in the wrong place forgive my ignorance.
I'm trying to buy a slip-on exhaust but can't find the size I need anywhere. Do I need 38mm? 51mm? I want to buy the right size to avoid any welding, because that would defeat the purpose for me. Any help would be appreciated. |
|
January 8th, 2019, 10:46 AM | #2 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
you need something like this. el cheapo mufflers from Ali Express come with this adapter. this is sold buy itself
by the way welcome
__________________________________________________
"trying not to get old" |
|
January 8th, 2019, 10:49 AM | #3 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
check out my el cheapo exhaust threads. might save some cash.
__________________________________________________
"trying not to get old" |
|
January 8th, 2019, 12:42 PM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Factory exhaust is 35mm OD where factory muffler slips on. Factory pipe is offset and angled from muffler; you'll notice inlet of muffer is angled and offset to match.
Option-1 Cone Adapter - Tip of cone-adapter is slightly large for factory exhaust (38mm). Shim with couple layers of soda/beer can. Due to offset of factory pipe, it will bring muffler very close to swingarm if it's an oval canister. Round mufflers will hit swingarm if used with cone-adapter. Option-2 Angled adapter - this adapter does not need shimming to fit factory pipe. Its angled outlet will let you use any muffler with centre inlet. Last futzed with by DannoXYZ; January 8th, 2019 at 02:57 PM. |
|
January 9th, 2019, 11:15 AM | #5 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Good info here.
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
January 9th, 2019, 05:16 PM | #6 |
ninjette.org newbie
Name: Leeroy
Location: North Austin, TX
Join Date: Jan 2019 Motorcycle(s): 2011 Ninja 250EX Posts: 2
|
Awesome that's exactly what I needed! Thanks y'all!!
|
|
January 9th, 2019, 06:34 PM | #7 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
great, introduce yourself and your ride.
__________________________________________________
"trying not to get old" |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to remove stock exhaust and install aftermarket Slip-On Exhaust System Ninja 300 | SON1C | 2013 - 2017 Ninja 300 Tech Talk | 4 | August 14th, 2014 05:45 PM |
slip-on exhaust | KVR | 2008 - 2012 Ninja 250R Tech Talk | 2 | April 11th, 2009 07:40 PM |
|
|